Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Difluorophosphoric acid

Difluorophosphoric acid

Difluorophosphoric acid structure

Difluorophosphoric acid 

structure

Description

Difluorophosphoric acid, anhydrous appears as a mobile colorless strongly fuming liquid. Density 1.583 g / cm3. Corrosive to glass, fabric, metals and tissue.


Difluorophosphoric acid, anhydrous appears as a mobile colorless strongly fuming liquid. Density 1.583 g / cm3. Corrosive to glass, fabric, metals and tissue.

Difluorophosphoric acid Basic Attributes

101.97700

101.98

237-421-6

3QNA5YG39L

1768

DTXSID6065632

Characteristics

47.11000

1.02580

1.583 g/cm3

-75ºC

115,9ºC

Fumes in air. Reacts vigorously with water to form corrosive and toxic hydrofluoric acid and heat.

Acids, Strong Non-oxidizing

Water-Reactive

DIFLUOROPHOSPHORIC ACID, ANHYDROUS reacts exothermically with chemical bases (examples: amines, amides, and inorganic hydroxides). These reactions can generate dangerously large amounts of heat in small spaces. Reacts vigorously with water to form corrosive and toxic hydrofluoric acid and heat. Reacts with active metals, including such structural metals as aluminum and iron, to release hydrogen, a flammable gas. Can initiate the polymerization of certain alkenes. Reacts with cyanide compounds to release gaseous hydrogen cyanide. Generates flammable and/or toxic gases in contact with dithiocarbamates, isocyanates, mercaptans, nitrides, nitriles, sulfides, and strong reducing agents. Additional gas-generating reactions occur with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), and carbonates. May catalyze (increase the rate of) chemical reactions.

Safety Information

II

8

UN 3264

R20/21/22

S26; S27; S36/37/39; S45

C

Special Hazards of Combustion Products: Irritating and toxic fumes of hydrogen fluoride and phosphoric acid may be formed in fires. (USCG, 1999)

|Danger|H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 40 companies from 3 notifications to the ECHA C&L Inventory.

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: SMALL FIRE: Dry chemical, CO2 or water spray. LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)

Air line mask or self-contained breathing apparatus; full protective clothing. (USCG, 1999)

Drug Information

Inhalation causes severe irritation of upper respiratory tract. Contact with liquid causes severe irritation of eyes and skin. Ingestion causes severe burns of mouth and stomach. (USCG, 1999)|Corrosives

Get medical attention as soon as possible following exposures to this compound. INHALATION: remove from exposure and support respiration. EYES: wash with copious volumes of water for at least 15 min. SKIN: wash with large amounts of water for 15 min. INGESTION: if victim is conscious, have him drink large amounts of water followed by milk or milk of magnesia. (USCG, 1999)

difluorophosphoric acid

Difluorophosphoric acid Use and Manufacturing

Phosphorodifluoridic acid: ACTIVE

Health Hazards -> Corrosives

Computed Properties

Molecular Weight:101.977
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:4
Exact Mass:101.96822259
Monoisotopic Mass:101.96822259
Topological Polar Surface Area:37.3
Heavy Atom Count:5
Complexity:62
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Difluorophosphoric acid

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.