4-DODECYLPHENOL MIXTURE OF ISOMERS

262.43

262.229665576 g/mol

248-312-8

A40GZ9LVDV

3145

TSCA listed

DTXSID00274042

20.2 Ų

0.94 g/mL at 25 °C(lit.)

78°C (estimate)

310-335 °C(lit.)

325 °F (USCG, 1999)

n20/D1.503(lit.)

No rapid reaction with air No rapid reaction with water

Phenols and Cresols

4-DODECYLPHENOL MIXTURE OF ISOMERS reacts as a weak organic acids. Reacts weakly exothermically with bases. Can react with strong reducing substances such as hydrides, nitrides, alkali metals, and sulfides is generate flammable gas (H2); the heat of the reaction may ignite the gas. Incompatible with sulfuric acid. May be nitrated by even dilute nitric acid to give products that can explode when heated or form metal salts that tend toward detonation by rather mild shock. Gives irritating vapors and toxic gases, such as carbon dioxide and carbon monoxide when burned [USCG, 1999].

Sealed in dry,Room Temperature

III

8

2

C,N

26-36/37/39-45-61-60

SL3675000

34-52/53-50/53

3145

Special Hazards of Combustion Products: Irritating vapors and toxic gases, such as carbon dioxide and carbon monoxide, may be formed when involved in fire.

|Warning|H315 (84.54%): Causes skin irritation [Warning Skin corrosion/irritation]|P201, P202, P264, P273, P280, P281, P302+P352, P305+P351+P338, P308+P313, P321, P332+P313, P337+P313, P362, P391, P405, and P501|Aggregated GHS information provided by 623 companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|Danger|H314 (97.44%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P273, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 39 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fire Extinguishing Agents Not to Be Used: Water. Fire Extinguishing Agents: Dry chemical, alcohol foam, or carbon dioxide. (USCG, 1999)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)

Full impervious protective clothing, including boots and gloves. Where splashing is possible wear full face shield or chemical safety goggles. Use approved respirator to protect against vapors. (USCG, 1999)

Exposure can cause irritation of eyes, nose and throat. Toxic by ingestion, inhalation, or skin contact.

Get medical attention. INHALATION: Remove to fresh air. If breathing has stopped, give artificial respiration. If breathing is difficult, give oxygen. EYES: Flush with water for at least 15 min., lifting lids occasionally. SKIN: Remove contaminated clothing and shoes. Wash with soap and water. (USCG, 1999)