Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > N-Methyl-1,3-propanediamine

N-Methyl-1,3-propanediamine

N-Methyl-1,3-propanediamine structure

N-Methyl-1,3-propanediamine 

structure
  • CAS No:

    6291-84-5

  • Formula:

    C4H12N2

  • Chemical Name:

    N-Methyl-1,3-propanediamine

  • Synonyms:

    1,3-Propanediamine,N1-methyl-;1,3-Propanediamine,N-methyl-;N1-Methyl-1,3-propanediamine;N-Methyl-1,3-diaminopropane;N-Methyl-1,3-propanediamine;3-Amino-1-(methylamino)propane;1-Amino-3-(methylamino)propane;3-(Methylamino)propylamine;N-Methylpropylenediamine;N-Methyltrimethylenediamine;N-Methyl-1,3-propylenediamine;1-(N-Methylamino)-3-aminopropane;(3-Aminopropyl)methylamine;Koei 3306;Methylaminopropylamine;3-(Methylamino)-1-propylamine;N1-Methylpropane-1,3-diamine;NSC 8160;N-(3-Aminopropyl)methylamine;N-(3-Aminopropyl)-N-methylamine;N1-Methyl-1,3-propanediamine

  • Categories:

    Organic Chemistry  >  Amides

Description

clear liquid


3-methylaminopropylamine is a dark amber liquid. (NTP, 1992)


3-methylaminopropylamine is a dark amber liquid. (NTP, 1992)

N-Methyl-1,3-propanediamine Basic Attributes

88.15

88.15

878143

228-544-6

4YP367238K

8160

1993

DTXSID5064201

29212900

Characteristics

38

-0.8

Clear Liquid

0.844 (NTP, 1992)

-72 °C

138-139 °C

96 °F

1.431

greater than or equal to 100 mg/mL at 66° F (NTP, 1992)

Flammables area

1.8-12.8%(V)

Highly flammable. Water soluble.

Amines, Phosphines, and Pyridines

Highly Flammable

3-METHYLAMINOPROPYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Safety Information

II

8

UN 2734 8/PG 2

3

10-20/21/22-34

16-26-36/37-45

TX8242500

F,C,Xi

P260-P280-P284-P305 + P351 + P338-P310

H226-H302-H312-H314-H330

This chemical is flammable. (NTP, 1992)

|Danger|H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P312, P301+P330+P331, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P310, P312, P321, P330, P363, P370+P378, P403+P235, P405, and P501|Aggregated GHS information provided by 501 companies from 10 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this compound can be extinguished using a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Seal the absorbent paper, as well as any of your clothing which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Wash any surfaces you may have contaminated with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. RECOMMENDED GLOVE MATERIALS: It is recommended that two different glove types be used for best protection. However, if this chemical makes direct contact with your gloves, or if a tear, puncture or hole develops, remove them at once. SUGGESTED GLOVES: Butyl rubber (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: This compound is flammable and corrosive. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)

N-Methyl-1,3-propanediamine Use and Manufacturing

1,3-Propanediamine, N1-methyl-: ACTIVE

Computed Properties

Molecular Weight:88.15
XLogP3:-0.8
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:3
Exact Mass:88.100048391
Monoisotopic Mass:88.100048391
Topological Polar Surface Area:38
Heavy Atom Count:6
Complexity:21.5
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of N-Methyl-1,3-propanediamine

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.