ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE
-
ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE
structure -
-
CAS No:
7126-50-3
-
Formula:
C8H9NO3
-
Chemical Name:
ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE
-
Synonyms:
ethyl 5-formyl-1H-pyrrole-2-carboxylate;ethyl 5-formylpyrrole-2-carboxylate;5-formyl-1H-pyrrole-2-carboxylic acid ethyl ester;1H-Pyrrole-2-carboxylic acid, 5-formyl-, ethyl ester;NSC272667;PubChem14844;SCHEMBL359688;CTK5D3787;DTXSID50313576;CS-D0032
- Categories:
-
CAS No:
ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE Basic Attributes
167.16
167.058243
272667
DTXSID50313576
2933990090
Safety Information
|Warning|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P340, P305+P351+P338, P312, P321, P330, P332+P313, P337+P313, P362, P403+P233, P405, and P501|The GHS information provided by 1 company from 1 notification to the ECHA C&L Inventory.
ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE Use and Manufacturing
To an ice cold solution of DMF (9.3 mL, 0.121 mmol, 1.12 eq.) in anhydrous DCM (23 mL) was added phosphorus oxychloride (11.1 mL, 0.120 mL, 1.11 eq.) dropwise. To an ice cooled solution of DMF (24.5 mL, 316.43 mmol) in dichloromethane (70 mL) was added POClA-6 To a solution of dimethylformamide (21 mL, 0.27 mol) in 75 mL of dichloroethane was added a solution of phosphorus oxychloride (25 mL, 0.27 mol) in 75 mL of dichloroethane at 0 oC. [0179] To a solution of dimethylformamide (21 mL, 0.27 mol) in 75 mL of dichloroethane was added a solution of phosphorus oxychloride (25 mL, 0.27 mol) in 75 mL of dichloroethane at 0° C. The mixture was stirred at room temperature for 30 minutes and cooled to 0° C. To the mixture was added a solution of ethyl pyrrole-2-carboxylate (25 g, 0.18 mol) in 50 mL of dichloroethane dropwise. The resulting mixture was stirred at room temperature for 30 minutes and then at 40° C. for 1 hour. The mixture was poured into ice and basified to pH 11 with 5 N sodium hydroxide solution. The mixture was extracted with ethyl acetate and the extract washed with water and brine and dried over anhydrous sodium sulfate. The two products were separated by column chromatography (1:3 ethyl acetate:hexane) to give 15 g (50percent yield) of 5-formyl-1H-pyrrole-2-carboxylic acid ethyl ester and 2 g (7percent yield) of 4-formyl-1H-pyrrole-2-carboxylic acid ethyl ester. 1H-NMR (300 MHz, dimethylsulfoxide) δ 13.02 (br s, 1H, NH), 9.69 (s, 1H, CHO), 6.95 (d, 1H), 6.86 (d, 1H), 4.27 (q, 2H, CH3), 1.28 (t, 3H, CH3). MS M/Z 167 [M+].To an ice-cooled solution of ethyl 1H-pyrrole-2-carboxylate2 (10 g, 72 mmol) in dry DMF (129.3 mL), freshly distilled phosphorus oxychloride (POCl3, 20.1 mL, 216 mmol) was added dropwise under argon atmosphere. After the completion of the addition, the cooling bath was removed and the reaction mixture was stirredat 30 °C for 21 h. Then, the mixture was gradually added to ice-water, the pH was adjusted to pH=7 with 25 percent aq. NH3 and the aqueous solution was extracted with DCM (3×). The combined organic layers were washed with saturated aqueous NaHCO3 (1×) and brine (1×), dried over anhydrous Na2SO4, filtered and evaporated under reduced pressure. The resulting oily residue was purified by silica gel flash column chromatography (DCM/MeOH 98:2) to afford 4 (5 g, red-browns olid, 42 percent) and ethyl 5-formyl-1H-pyrrole-2-carboxylate (5.5 g, red-brown solid, 46 percent).For compound 4: Rf (toluene/EtOAc 8:2) 0.13. mp 103-104 °C. IR (KBr): max 3175, 2881, 1705, 1651, 1269 cm-1. 1H NMR (CDCl3, 400 MHz): 10.10 (br s, 1H), 9.85 (s, 1H), 7.58 (dd, J = 3.3 Hz, J = 1.5 Hz, 1H), 7.33-7.32 (m, 1H), 4.36 (q, J = 7.1 Hz, 2H), 1.37 (t, J = 7.1 Hz, 3H). 13C NMR (CDCl3, 100 MHz): 185.82, 161.12, 128.61, 127.69, 125.26, 114.28, 61.31, 14.45. MS (ESI+) (m/z): 168.53 [M+H]+. HRMS-ESI (m/z): [M+Na]+ calcd for C8H9NO3: 190.04746, found: 109.04756.Diethyl oxalate and D-alanine were weighed according to a molar ratio of 1:1.Mixing and stirring to obtain a mixture; by mass ratio1:17, potassium tert-butoxide was dissolved in absolute ethanol, mixed and cooled to 0 ° C, and the mixture was slowly added to a solution of potassium t-butoxide in ethanol.The amount of the mixture added is 9percent of the mass of the potassium t-butoxide solution.After the completion of the addition, the temperature was raised to room temperature, and the reaction was stirred for 1.7 h; after the reaction, the mixture was discharged, and the reaction product was poured into ice water. After stirring for 17 min, the pH was adjusted to 5.7 with hydrochloric acid, and a solid was precipitated, suction filtered, and the residue was collected and recrystallized. After drying, ethyl 5-formyl-1H-pyrrole-2-carboxylate was obtained, the melting point was 72.8 ° C, the purity was 99.8percent, and the yield was 86percent.a)
Computed Properties
Molecular Weight:167.16
XLogP3:1.1
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:4
Exact Mass:167.058243149
Monoisotopic Mass:167.058243149
Topological Polar Surface Area:59.2
Heavy Atom Count:12
Complexity:181
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
3-(3-CHLOROPROPYLCARBAMOYL)BENZENEBORONIC ACID
874288-10-5
-
3-Pyridinecarboxylic acid, 2,6-dichloro-, ethyl ester
58584-86-4
-
(+)-Mesembrenone
468-54-2
-
1,5-Methano-1H-3-benzazepine, 2,3,4,5-tetrahydro-, hydrochloride (1:1) Formula
230615-52-8
-
(4-acetyloxyphenyl)-(4-acetyloxyphenyl)imino-oxidoazanium Formula
79030-44-7
-
1-(4-Methoxy-phenyl)-2,5-dimethyl-1H-pyrrole-3-carbaldehyde Formula
347331-30-0
-
2,2'-DIAMINODIPHENYL SULFIDE Structure
5873-51-8
-
AC-ARG-PHE-MET-TRP-MET-ARG-NH2 Structure
152274-65-2
-
What is 1,1-Dimethylethyl 2-bromo-2-methylpropanoate
23877-12-5
-
What is 1,3-Dichloro-2,4-difluorobenzene
36556-37-3
ETHYL5-FORMYL-1H-PYRROLE-2-CARBOXYLATE
SDSRequest for Quotation