Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Magnesium hydride

Magnesium hydride

Magnesium hydride structure

Magnesium hydride 

structure
  • CAS No:

    7693-27-8

  • Formula:

    H2Mg

  • Chemical Name:

    Magnesium hydride

  • Synonyms:

    Magnesium hydride (MgH2);Magnesium dihydride;Magnesium hydride;Tego Magnan

  • Categories:

    Cosmetic Ingredient  >  Antioxidant Ingredient

Description

Light grey powder Magnesium hydride is a coarse, gray crystalline solid.


Magnesium hydride is a white crystalline solid. It reacts violently with water and may ignite upon contact with air. It is used to make other chemicals.


Magnesium hydride is a white crystalline solid. It reacts violently with water and may ignite upon contact with air. It is used to make other chemicals.

Magnesium hydride Basic Attributes

26.32

23.98500

231-705-3

Y93032D743

2010

28500090

Characteristics

0 Ų

0.22500

1.45

>250 °C (decomp)

water-free area

Highly flammable. Pyrophoric, ignites spontaneously in air and forms magnesium oxide and water [Merck 11th ed. 1989]. Reacts with water to form caustic solution of magnesium hydroxide and hydrogen gas (H2) and heat sufficient to ignite the evolved hydrogen [Merck 11th ed. 1989].

Metal Hydrides, Metal Alkyls, Metal Aryls, and Silanes

Strong Reducing Agent

Hydrides, such as MAGNESIUM HYDRIDE, are reducing agents and react rapidly and dangerously with oxygen and with other oxidizing agents, even weak ones. Thus, they are likely to ignite on contact with alcohols. Hydrides are incompatible with acids, alcohols, amines, and aldehydes.

Safety Information

4.3

2010

15-11-36/37/38

8-43A-43-36/37/39-26-16-7

F,Xi

P223; P231 + P232; P305 + P351 + P338; P370 + P378; P422

H260; H315; H319

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Produce flammable gases on contact with water. May ignite on contact with water or moist air. Some react vigorously or explosively on contact with water. May be ignited by heat, sparks or flames. May re-ignite after fire is extinguished. Some are transported in highly flammable liquids. Runoff may create fire or explosion hazard. (ERG, 2016)|Flammable - 4th degree, Reactive - 2nd degree

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: DO NOT USE WATER OR FOAM. SMALL FIRE: Dry chemical, soda ash, lime or sand. LARGE FIRE: DRY sand, dry chemical, soda ash or lime or withdraw from area and let fire burn. Move containers from fire area if you can do it without risk. FIRE INVOLVING METALS OR POWDERS (ALUMINUM, LITHIUM, MAGNESIUM, ETC.): Use dry chemical, DRY sand, sodium chloride powder, graphite powder or Met-L-X® powder; in addition, for Lithium you may use Lith-X® powder or copper powder. Also, see ERG Guide 170. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Stop leak if you can do it without risk. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. DO NOT GET WATER on spilled substance or inside containers. SMALL SPILL: Cover with DRY earth, DRY sand or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Dike for later disposal; do not apply water unless directed to do so. POWDER SPILL: Cover powder spill with plastic sheet or tarp to minimize spreading and keep powder dry. DO NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST. (ERG, 2016)

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death. May produce corrosive solutions on contact with water. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, wipe from skin immediately; flush skin or eyes with running water for at least 20 minutes. Keep victim calm and warm. (ERG, 2016)

Magnesium hydride Use and Manufacturing

Fire Hazards -> Flammable - 4th degree, Reactive - 2nd degree

Computed Properties

Molecular Weight:26.321
Hydrogen Bond Acceptor Count:2
Exact Mass:26.0006918
Monoisotopic Mass:26.0006918
Heavy Atom Count:1
Covalently-Bonded Unit Count:3
Compound Is Canonicalized:Yes

Recommended Suppliers of Magnesium hydride

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.