Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Magnesium amide (Mg(NH2)2)

Magnesium amide (Mg(NH2)2)

Magnesium amide (Mg(NH2)2) structure

Magnesium amide (Mg(NH2)2) 

structure
  • CAS No:

    7803-54-5

  • Formula:

    H4MgN2

  • Chemical Name:

    Magnesium amide (Mg(NH2)2)

  • Synonyms:

    Magnesium amide (Mg(NH2)2);Magnesium diamide;2368927-83-5

  • Categories:

    Catalyst and Auxiliary  >  Antioxidants

Description

Whitish to gray crystals. D 1.40. Decomposes when heated.


Magnesium diamide appears as a whitish to gray-colored crystalline solid. Denser than water. Contact may irritate skin, eyes and mucous membranes. Vapors may be toxic by inhalation. Used to make other chemicals.


Magnesium diamide appears as a whitish to gray-colored crystalline solid. Denser than water. Contact may irritate skin, eyes and mucous membranes. Vapors may be toxic by inhalation. Used to make other chemicals.

Magnesium amide (Mg(NH2)2) Basic Attributes

263.61700

263.11600

K61D6KPF64

2004

Characteristics

20.31000

2.90670

Magnesium diamide appears as a whitish to gray-colored crystalline solid. Denser than water. Contact may irritate skin, eyes and mucous membranes. Vapors may be toxic by inhalation. Used to make other chemicals.

d425 1.39

decomposes when heated [HAW93]

reacts violently with H2O releasing NH3 [MER06]

May spontaneously ignite upon exposure to air. Soluble in water. Reacts violently with water to form caustic ammonia/ammonium hydroxide and heat. Reacts violently with water, evolving NH3 (Budavari 1996). Based on a scenario where the chemical is spilled into an excess of water (at least 5 fold excess of water), half of the maximum theoretical yield of ammonia gas will be created in 0.01 minutes. Experimental details are in the following: "Development of the Table of Initial Isolation and Protective Distances for the 2008 Emergency Response Guidebook", ANL/DIS-09-2, D.F. Brown, H.M. Hartmann, W.A. Freeman, and W.D. Haney, Argonne National Laboratory, Argonne, Illinois, June 2009.

Bases, Strong

Water-Reactive

Bases or alkalis are chemically similar to sodium hydroxide (NaOH) or sodium oxide (Na2O). They neutralize acids exothermically to form salts plus water. When soluble in water they give solutions having a pH greater than 7.0. Mixing these materials with water can generate troublesome amounts of heat as the base is dissolved or diluted. Bases react with certain metals (such as aluminum and zinc) to form oxides or hydroxides of the metal and generate gaseous hydrogen. Bases may initiate polymerization reactions in polymerizable organic compounds, especially epoxides). They may generate flammable and/or toxic gases with ammonium salts, nitrides, halogenated organics, various metals, peroxides, and hydroperoxides. Materials of this group often serve as catalysts.

Safety Information

II

4.2

UN 2004

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated. (ERG, 2016)|Flammable - 3rd degree, Reactive - 2nd degree

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: DO NOT USE WATER, CO2 OR FOAM ON MATERIAL ITSELF. Some of these materials may react violently with water. EXCEPTION: For Xanthates, UN3342 and for Dithionite (Hydrosulfite/Hydrosulphite) UN1384, UN1923 and UN1929, USE FLOODING AMOUNTS OF WATER for SMALL AND LARGE fires to stop the reaction. Smothering will not work for these materials, they do not need air to burn. SMALL FIRE: Dry chemical, soda ash, lime or DRY sand, EXCEPT for UN1384, UN1923, UN1929 and UN3342. LARGE FIRE: DRY sand, dry chemical, soda ash or lime EXCEPT for UN1384, UN1923, UN1929 and UN3342, or withdraw from area and let fire burn. CAUTION: UN3342 when flooded with water will continue to evolve flammable Carbon disulfide/Carbon disulphide vapors. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers or in contact with substance. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: See ERG Table 1 - Initial Isolation and Protective Action Distances on the UN/NA 2004 datasheet. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Fully encapsulating, vapor-protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Stop leak if you can do it without risk. SMALL SPILL: EXCEPTION: For spills of Xanthates, UN3342 and for Dithionite (Hydrosulfite/Hydrosulphite), UN1384, UN1923 and UN1929, dissolve in 5 parts water and collect for proper disposal. CAUTION: UN3342 when flooded with water will continue to evolve flammable Carbon disulfide/Carbon disulphide vapors. Cover with DRY earth, DRY sand or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Use clean, non-sparking tools to collect material and place it into loosely covered plastic containers for later disposal. Prevent entry into waterways, sewers, basements or confined areas. (ERG, 2016)

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Keep victim calm and warm. (ERG, 2016)

Magnesium amide (Mg(NH2)2) Use and Manufacturing

Uses

Polymerization catalyst.

Fire Hazards -> Flammable - 3rd degree, Reactive - 2nd degree

Computed Properties

Molecular Weight:56.35
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Exact Mass:56.0224898
Monoisotopic Mass:56.0224898
Topological Polar Surface Area:2
Heavy Atom Count:3
Covalently-Bonded Unit Count:3
Compound Is Canonicalized:Yes

Recommended Suppliers of Magnesium amide (Mg(NH2)2)

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.