Benzo[f]quinoline
-
Benzo[f]quinoline
structure -
-
CAS No:
85-02-9
-
Formula:
C13H9N
-
Chemical Name:
Benzo[f]quinoline
-
Synonyms:
Benzo[f]quinoline;1-Azaphenanthrene;β-Naphthoquinoline;5,6-Benzoquinoline;5,6-Benzo[f]quinoline;NSC 9850;76713-23-0
-
CAS No:
Description
BROWN CRYSTALLINE POWDER
Benzo(f)quinoline appears as yellow crystals or white powder. Characteristic irritating odor. (NTP, 1992)
Benzo(f)quinoline appears as yellow crystals or white powder. Characteristic irritating odor. (NTP, 1992)
Characteristics
12.9
3.5
Crystalline
1.2±0.1 g/cm3
94 °C
352 °C
166 °C
1.727
less than 0.1 mg/mL at 66° F (NTP, 1992)
5.5 mm Hg at 66° F (NTP, 1992)
mma-sat 50 mg/plate 50NNAZ 7,73,83
Flammable; burning produces toxic nitrogen oxide fumes
Sensitive to prolonged exposure to air. Insoluble in water.
Amines, Phosphines, and Pyridines
BENZO(F)QUINOLINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. May generate hydrogen, a flammable gas, in combination with strong reducing agents such as hydrides.
Safety Information
40-36/37/38
45-36/37/39-26
DK1428000
Xn
Ventilated, low temperature and dry
P273, P501
H401
This compound is combustible. (NTP, 1992)
|Danger|H301 (97.44%): Toxic if swallowed [Danger Acute toxicity, oral]|P264, P270, P280, P301+P310, P305+P351+P338, P310, P321, P330, P405, and P501|Aggregated GHS information provided by 39 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|Not Classified
Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly-closed container under an inert atmosphere, and store it at refrigerated temperatures. STORE AWAY FROM SOURCES OF IGNITION. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms of exposure to this compound include severe local damage to the skin and mucous membranes indicated by discoloration, severe irritation, redness, swelling and the formation of blisters and bumps. It may also cause visual disturbances, eye irritation, conjunctivitis, light-sensitivity, tearing and burning sensations. Chronic exposure may cause necrosis and corneal injury. ACUTE/CHRONIC HAZARDS: This material causes severe irritation and local damage to the skin and mucous membranes following contact with solutions or the neat compound. It may cause serious visual disturbances as well as lacrimation and burning of the eyes. When heated to decomposition it emits toxic fumes. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)
5,6-benzoquinoline
Benzo[f]quinoline Use and Manufacturing
As a reagent for the determination of cadmium which is pptd as (C13H9N)2H2(CdI4) from dil nitric or sulfuric acid solution in the presence of potassium iodide.
Computed Properties
Molecular Weight:179.22
XLogP3:3.5
Hydrogen Bond Acceptor Count:1
Exact Mass:179.073499291
Monoisotopic Mass:179.073499291
Topological Polar Surface Area:12.9
Heavy Atom Count:14
Complexity:201
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Benzo[f]quinoline
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of fine chemicals,pharmaceutical materials