Propyl acrylate

114.14

114.14

1744954

213-120-5

T23G14902U

32620

DTXSID6061288

2916129000

26.30000

1.12560

0,92 g/cm3

37.22°C (estimate)

121 °C @ Press: 800 Torr

24°C

1.4123

Immiscible with water.

14.5 mm Hg at 25 deg C (est)

Henry's Law constant = 8.88X10-5 atm-cu m/mol at 25 °C (est)

Hydroxyl radical reaction rate constant = 1.23X10-11 cu cm/molec-sec at 25 °C (est)

III

3

3272

10-36/37/38

16-26-36

P210, P233, P240, P241, P242, P243, P261, P264, P271, P273, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P391, P403+P233, P403+P235, P405, P501

H226

SRP: Criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

|Warning|H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P261, P264, P271, P273, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P391, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 5 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Workers should be provided with hand protection and eye and face protection. /Acrylic resins/

Adequate exhaust ventilation should be provided to protect the worker from inhalation of fumes. Maintenance and good housekeeping should be ensured. /Acrylic resins/

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Esters and related compounds/|/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Provide a low-stimulus environment. Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Treat frostbite by rapid rewarming ... . /Esters and related compounds/|/SRP:/ Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Esters and related compounds/

/SIGNS AND SYMPTOMS/ The lower-molecular-wt esters of acrylic acids are irritants to skin, eyes, and mucous membranes. /Esters of acrylic acid/|/SIGNS AND SYMPTOMS/ Inhalation ... can lead to serious toxic events... /Esters of acrylic acid/

45% for coatings, 16% for textiles & leather finishes, 9% for paper coatings, 8% for adhesives, 6% for polyacrylates, 5% for polishes, 5% for acrylic fibers, 6% other (1983 est) /Acrylates and acrylic acid/|(All acrylic acid esters) 46% as a monomer for emulsion polymers and solution polymers in latex paints; 26% as a monomer for emulsion polymers in textile applications; 6% as a comonomer for acrylic fibers; 6% as a monomer for emulsion polymers in polishes; 6% as a monomer for emulsion polymers in paper applications; 4% as a monomer for emulsion polymers used in base coatings and surface impregnation of natural leather; 6% in misc applications (1973)

2-Propenoic acid, propyl ester: ACTIVE|Alkyl mercury compounds have been used as seed disinfectants and for fungicides. They have also been used in organic synthesis. /Mercury alkyl compounds/