Hexanediamide
-
Hexanediamide
structure -
-
CAS No:
628-94-4
-
Formula:
C6H12N2O2
-
Chemical Name:
Hexanediamide
-
Synonyms:
Hexanediamide;Adipamide;1,4-Butanedicarboxamide;Adipic acid diamide;Adipic diamide;Adipic acid amide;NSC 7623
- Categories:
-
CAS No:
Description
Adipamide is white powder and chunks. It is slightly soluble in water and incompatible with strong oxidizing agents. On combustion and decomposition, adipamide produces toxic fumes of carbon monoxide, carbon dioxide, and nitrogen oxides. Adipamide is powder in appearance and slightly soluble in water. It is incompatible with strong oxidizing agents. On combustion or decomposition, adipamide releases hazardous products, toxic fumes of carbon monoxide, carbon dioxide, and nitrogen oxides.
Adipamide is a colorless powder. (NTP, 1992)|PelletsLargeCrystals
Adipamide is a colorless powder. (NTP, 1992)|Adipamide is a fatty amide.
Hexanediamide Basic Attributes
144.17
144.17
211-062-5
40DRU033OW
7623
DTXSID4020032
PLATES
29241900
Characteristics
86.2
0.91800
Adipamide is a colorless powder. (NTP, 1992)
1.360 g/cm3
220 °C
412.4ºC at 760 mmHg
203.2ºC
1.48
formic acid: soluble 50mg/mL, clear, colorless to faintly yellow
Store below +30°C.
Oral-rat LDL0: 500 mg/kg;Oral-Mouse LD50: 6000mg/kg
Flammable; burning releases toxic nitrogen oxide fumes
Slightly soluble in water (NTP, 1992).
Amides and Imides
ADIPAMIDE forms flammable gases with strong reducing agents. A very weak base. Mixing with dehydrating agents such as P2O5 or SOCl2 generates adiponitrile. Combustion generates toxic mixed oxides of nitrogen (NOx).
Safety Information
NONH for all modes of transport
2
36/37/38
26-36
AU7800000
Xi
Treasury is ventilated, low temperature and dry; stored separately from food materials
Stable. Combustible. Incompatible with strong oxidizing agents.
P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, P501
H315
The flash point of this chemical has not been determined, but it is probably combustible. (NTP, 1992)
|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 43 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. You should then dampen the solid spill material with methanol, then transfer the dampened material to a suitable container. Use absorbent paper dampened with methanol to pick up any remaining material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash contaminated surfaces with methanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
POLYMETHYLENE CHAINS TERMINALLY SUBSTITUTED WITH VARIOUS COMBINATIONS OF CARBOXYLATE, AMINO, AMIDE, OR SULFOXIDE GROUPS WERE TESTED FOR INDUCING ERYTHROID DIFFERENTIATION IN MURINE ERYTHROLEUKEMIA CELLS. ALL POTENT INDUCING AGENTS POSSESSED BOTH A HYDROPHILIC & HYDROPHOBIC PORTION OF THE MOLECULE, AS WELL AS A PLANER PORTION. THE POLYMETHYLENE CHAIN JOINING FUNCTIONAL GROUPS MUST BE FLEXIBLE & MUST BE 5-6 CARBON ATOMS IN LENGTH TO ACHIEVE MAXIMAL ACTIVITY.|VARIOUS N-SUBSTITUTED POLYMETHYLENE DIAMIDES WERE TESTED FOR THEIR POTENCY TO INDUCE ERYTHROID DIFFERENTIATION IN MURINE ERYTHROLEUKEMIA CELLS. POLYMETHYLENE DIAMIDES HAD NO EFFECT ON THE INDUCTION OF HEMOGLOBIN SYNTHESIS. THE N-ALKYLATED AMIDE GROUP APPEARS TO BE REQUIRED FOR INDUCTION OF DIFFERENTIATION IN MURINE ERYTHROLEUKEMIA CELLS.
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
adipamide
Hexanediamide Use and Manufacturing
Processing aids, not otherwise listed
All other chemical product and preparation manufacturing|Hexanediamide: ACTIVE
Fatty Acyls [FA] -> Fatty amides [FA08] -> Primary amides [FA0801]
Computed Properties
Molecular Weight:144.17
XLogP3:-1.2
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:5
Exact Mass:144.089877630
Monoisotopic Mass:144.089877630
Topological Polar Surface Area:86.2
Heavy Atom Count:10
Complexity:118
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Hexanediamide
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
3 YRS
Business licensedTrader Supplier of N,N'-Dimethylethylenediamine
Learn More Other Chemicals
-
4,4′-(1,2-Diazenediyl)bis[N,N,N-trimethylbenzenaminium]
21704-61-0
-
N-(4-Chloro-2-methylphenyl)formamide
21787-81-5
-
Basic Blue 8
2185-87-7
-
3-tert-butyl-5-chloro-2-hydroxy-N-(2-nitrosophenyl)benzamide Formula
21889-00-9
-
1-Phenylcyclohexylamine Formula
2201-24-3
-
6-Hydroxymelatonin Formula
2208-41-5
-
Pyrrocaine Structure
2210-77-7
-
2-amino-N-(4-ethoxyphenyl)ethanesulfonamide Structure
22103-30-6
-
What is Bufeniode
22103-14-6
-
What is 4-(2-Quinolinyl)benzenamine
22191-97-5