Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Triisopropyl borate

Triisopropyl borate

Triisopropyl borate structure

Triisopropyl borate 

structure
  • CAS No:

    5419-55-6

  • Formula:

    C9H21BO3

  • Chemical Name:

    Triisopropyl borate

  • Synonyms:

    Boric acid (H3BO3),tris(1-methylethyl) ester;Boric acid (H3BO3),triisopropyl ester;Isopropyl borate;Isopropyl borate ((C3H7O)3B);Triisopropyl borate;Boron isopropoxide;Triisopropoxyboron;Boron triisopropoxide;Triisopropyl orthoborate;Triisopropoxyborane;Trisisopropoxyborane;Boric acid triisopropyl ester;NSC 9779;Tris(1-methylethyl) borate;Tris(propan-2-yl)borate

  • Categories:

    Chemical Reagents  >  Organic Reagents

Description

clear colourless liquid


Triisopropyl borate appears as a colorless liquid. Less dense than water and insoluble in water. Vapors heavier than air. Used to make other chemicals.|Liquid


Triisopropyl borate appears as a colorless liquid. Less dense than water and insoluble in water. Vapors heavier than air. Used to make other chemicals.

Triisopropyl borate Basic Attributes

188.07

188.07

1701469

226-529-9

YWV817MXF3

9779

2616

DTXSID7027598

29209085

Characteristics

27.69000

4.09

Clear colorless Liquid

0.815 g/cm3

-59 °C

140 °C

62.6 °F

1.393

Decomposes in water.Miscible with ether, ethanol, isopropanol and benzene.

Flammables area

76 mm Hg ( 75 °C)

Oral-Mouse LD50: 2500 mg/kg

combustible

Highly flammable. Insoluble in water.

Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters

Highly Flammable

Borates, such as TRIISOPROPYL BORATE, behave similarly to esters in that they react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters/borates with alkali metals and hydrides.

Safety Information

II

3

UN 2616 3/PG 2

2

11

7-16-23-24/25-33-9

ED5950000

F,Xi

Warehouse ventilated, low temperature and dry

P210

H225

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 3rd degree, Reactive - 1st degree

|Danger|H225 (93.89%): Highly Flammable liquid and vapor [Danger Flammable liquids]|P210, P233, P240, P241, P242, P243, P264, P280, P303+P361+P353, P305+P351+P338, P337+P313, P370+P378, P403+P235, and P501|Aggregated GHS information provided by 131 companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. Do not use dry chemical extinguishers to control fires involving nitromethane (UN1261) or nitroethane (UN2842). LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Toxicity

moderately toxic

Drug Information

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

Triisopropyl borate Use and Manufacturing

Uses

Organic synthesis intermediate


Intermediates

All other basic organic chemical manufacturing|Boric acid (H3BO3), tris(1-methylethyl) ester: ACTIVE

Fire Hazards -> Flammable - 3rd degree, Reactive - 1st degree

Computed Properties

Molecular Weight:188.07
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:6
Exact Mass:188.1583747
Monoisotopic Mass:188.1583747
Topological Polar Surface Area:27.7
Heavy Atom Count:13
Complexity:102
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Triisopropyl borate

  • China CN

    3 YRS

    Business licensed
    Trader Supplier of Acrylonitrile,Sodium biselenite methylamine solution,Methylamine [anhydrous],Zinc dust,Hydrogen peroxide solution [content >8%],Triisopropyl borate,Fuming sulfuric acid,Lithium borohydride,Triethyl borate,Ethyl propionate,Propionic anhydride,Propylarsinic acid,Aniline,4-Aminobiphenyl,4-Aminophenol,2-Aminopropane,Propane,0,0-Dimethyl-S-(2,3-dihydro-5-methoxy-2-oxo-1,3,4-thiadiazol-3-ylmethyl) dithiophosphate,Natural resin paint,Epoxy resin paint,Amino resin paint,Rubber paint,Organic silicon resin,Cyclopentene,n-Butylcyclopentane,N-n-Butylaniline,3-Ethoxyaniline,Ethyl acetate,Acetic acid solution [10%< content <80%],Sodium ethoxide ethanol solution,Ethylamine aqueous solution [concentration 50%~70%],Sodium oxide,Ethyl nitrite,Sodium nitrite,Bromocyclopentane,1-Bromopropane,Bromoacetone,2-Bromoaniline,2-Nitrobromobenzene,3-Nitrobenzyl chloride,4-Nitro-2-methylaniline,4-Nitro-1,3-dimethylbenzene,Valeryl chloride,Glutaronitrile,Lead tetraoxide,Silicon tetrachloride,1,1,3,3-Tetrachloroacetone,Tetrapropylene,2-tert-Butylphenol,Tetradecanoyl chloride,Trichloroacetic acid,Trichlorotoluene,Aluminum trichloride [anhydrous],Phosphorus trichloride,Trimethylcyclohexylamine,1,2,3-Trimethylbenzene,Trimethylchlorosilane,Solvent benzene,Sodium hydroxide,Potassium hydroxide solution [content >30%],Hydrobromic acid,Methyl chloroacetate,Butyl chloroacetate,3-Chloronitrobenzene,4-Chlorotoluene,1-Chloropropane,2-Chloropropionic acid,4-Chloroaniline,2-Chloroaniline,2-Chloro-4-nitroaniline,4-Chloro-2-nitrophenol,2,2',4,4',5,5'-Hexabromodiphenyl ether,Hexamethyldisiloxane,Diethyl sulfate,Thioacetic acid,Aluminum phosphide,o-Toluenesulfonyl chloride,Phthalimide,Potassium antimony tartrate,2-Methoxyaniline,Formic acid,1-Methylpentanol,Methyltriethoxysilane,2-Methylaniline,2-Methyl-1-propanol,Toluene diisocyanate,Cyclooctene,Cyclopentane,Cyclohexanone,Cyclohexylamine,Cyclopropane,2-Furanmethanol,N,N-Diethyl-p-toluidine,N,N-Diethyl-1,3-propanediamine,Sodium 2,4-dinitro-5-methylphenolate,3,5-Dinitroaniline,2,6-Dinitroaniline,3,6-Dihydroxyphthalonitrile,3,3'-Dichlorobenzidine,2,4-Dichloroaniline,1,3-Dichlorobenzene,2,2-Dimethylpropionate,3,4-Dimethylaniline,2,5-Dimethylaniline,3,3'-Dimethyl-4,4'-diaminobiphenyl,3,4-Dimethylphenol,1,4-Dimethylbenzene,N,N-Dibutylaniline,Bromoacetic acid,Bromacetyl bromide,Isooctane,Isooctene,Natural gas [rich in methane] (only for chemical raw material use,not for fuel use),Tributyltin acetate,Diphenylphosphine dichloride,Sodium chloroacetate,Dicyclohexylamine,Valeric acid,n-Propyl mercaptan,1,3-Dichloropropane,Dichloromethane,tert-Butyl chloride,Cyclopentyl chloride,Phosphorous acid,Cyclopentanone,Trichloroacetaldehyde [stabilized],Stannous octoate,Calcium resin,Cyclohexane,n-Octane,1,2-Dichloroethane,Thionyl chloride,tert-Butyl hydroperoxide [79%< content <90%,water content >10%],Isopropenyl acetate,Sodium dithionite,Sodium dithionate,Propionyl chloride,Benzene,Hydrobromic acid,Triethylamine,Cyclopentyl chloride,Iodine trichloride,Triethyl borate,Trimethyl borate,Toluene-2,4-diisocyanate,Hydrochloric acid,Chloroform,Benzyl cyanide,Acetone,Sulfuric acid,Toluene
    Unit Price: $1.01 /MT FOB
    CAS No.: 5419-55-6
    Grade: Pharmaceutical Grade
    Content: 98.5%
    Inquiry
  • China CN

    5 YRS

    Business licensed Certified factory
    Manufactory Supplier of Active Pharm Ingredients,Chemical Catalyst,Pharmaceutical Intermediates,Flavors and Fragrances,Agrochemicals,Chemical Pesticides,Organic Intermediates,OLED Intermediates
    CAS No.: 5419-55-6
    Grade: Pharmaceutical Grade
    Content: 99%
    Inquiry
  • China CN

    5 YRS

    Business licensed
    Trader Supplier of PVC resin,pvc paste resin,melamine

Latest News on Triisopropyl borate

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.