1-Iodo-3-nitrobenzene
-
1-Iodo-3-nitrobenzene
structure -
-
CAS No:
645-00-1
-
Formula:
C6H4INO2
-
Chemical Name:
1-Iodo-3-nitrobenzene
-
Synonyms:
Benzene,1-iodo-3-nitro-;1-Iodo-3-nitrobenzene;m-Iodonitrobenzene;3-Iodonitrobenzene;m-Nitrophenyl iodide;3-Iodo-1-nitrobenzene;3-Nitrophenyl iodide;3-Nitroiodobenzene;m-Nitroiodobenzene;NSC 3538;3-Nitro-1-iodobenzene
- Categories:
-
CAS No:
Description
yellow to yellow-green powder
Monoclinic prisms or tan solid. (NTP, 1992)
Monoclinic prisms or tan solid. (NTP, 1992)|1-iodo-3-nitrobenzene is a C-nitro compound that is nitrobenzene bearing an iodine substituent at C-3. It is a C-nitro compound and an organoiodine compound.
1-Iodo-3-nitrobenzene Basic Attributes
249.01
249.01
1525167
211-427-9
3538
1325
DTXSID5025449
2904909090
Characteristics
45.8
2.94
Monoclinic prisms or tan solid. (NTP, 1992)
1.9477 at 122° F (NTP, 1992)
38.5 °C
280 °C
161 °F
1.663
H2O: insoluble
Refrigerator (+4°C) + Flammables area
Insoluble in water.
Nitro, Nitroso, Nitrate, and Nitrite Compounds, Organic
1-IODO-3-NITROBENZENE is incompatible with strong bases and strong oxidizers. (NTP, 1992)
Safety Information
I; II; III
4.1
UN 1325 4.1/PG 2
3
20/21/22-36/37/38-36-33-11
26-36/37/39-45-16-36
Xn,F,Xi
Stable. Highly flammable. Incompatible with strong bases, strong oxidizing agents.
P210-P261-P280-P305 + P351 + P338
H228-H302 + H312 + H332-H315-H319-H335
This chemical is combustible. (NTP, 1992)
|Warning|H228 (88.89%): Flammable solid [Danger Flammable solids]|P210, P240, P241, P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P312, P304+P340, P305+P351+P338, P312, P321, P322, P330, P332+P313, P337+P313, P362, P363, P370+P378, P403+P233, P405, and P501|Aggregated GHS information provided by 45 companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)
Excerpt from ERG Guide 133 [Flammable Solids]: As an immediate precautionary measure, isolate spill or leak area for at least 25 meters (75 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 100 meters (330 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this chemical under ambient temperatures, and keep it away from oxidizing materials. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is stored, weighed and diluted, wear an approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms of exposure to this compound include irritation of the skin and eyes, methemoglobinemia and cyanosis. ACUTE/CHRONIC HAZARDS: This compound may be harmful by inhalation, ingestion or skin absorption. It may be readily absorbed through the skin. It is also an irritant to the skin and eyes. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides and hydrogen iodide. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Computed Properties
Molecular Weight:249.01
XLogP3:2.9
Hydrogen Bond Acceptor Count:2
Exact Mass:248.92868
Monoisotopic Mass:248.92868
Topological Polar Surface Area:45.8
Heavy Atom Count:10
Complexity:134
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
6-Methyl-2′,3′-dideoxyadenosine
85326-07-4
-
2-[[2-(1H-indol-3-yl)acetyl]-methylamino]-2-phenyl-N-(4-propan-2-ylphenyl)acetamide
853138-65-5
-
Phenylmethyl docosanoate
85263-74-7
-
5,6,7,8-Tetrahydro-2-naphthalenesulfonic acid Formula
93-12-9
-
6-CHLORO-3-PHENYL-2-QUINOLINOL Formula
85274-64-2
-
2,5-Furandione, dihydro-, monopolyisobutylene derivs. Formula
67762-77-0
-
N-(4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11-Heptadecafluoroundecyl)maleimide Structure
852527-40-3
-
2-Benzothiazolecarboxaldehyde,5-methoxy-(5CI) Structure
854059-90-8
-
What is Benzamide, 5-(aminosulfonyl)-N-[(2-ethyloctahydro-1H-isoindol-1-yl)methyl]-2-methoxy-, hydrochloride (1:1)
85409-39-8
-
What is 3-(2,4-Dimethylphenyl)-5-phenyl-1H-1,2,4-triazole
85303-90-8