3-Bromobiphenyl
-
3-Bromobiphenyl
structure -
-
CAS No:
2113-57-7
-
Formula:
C12H9Br
-
Chemical Name:
3-Bromobiphenyl
-
Synonyms:
1,1′-Biphenyl,3-bromo-;Biphenyl,3-bromo-;3-Bromo-1,1′-biphenyl;3-Bromobiphenyl;m-Bromobiphenyl;3-Xenyl bromide;[1,1′-Biphenyl]-3-yl bromide;1-Bromo-3-phenylbenzene;NSC 407775;3-Biphenyl bromide;PBB 2
- Categories:
-
CAS No:
Description
Colorless to pale yellow liquid
3-bromobiphenyl is a clear yellow viscous liquid. Insoluble in water. (NTP, 1992)
3-bromobiphenyl is a clear yellow viscous liquid. Insoluble in water. (NTP, 1992)
3-Bromobiphenyl Basic Attributes
233.1
233.10
2043191
218-304-9
O7I53K56S8
407775
DTXSID5024639
2903999090
Characteristics
0
4.65
Light yellow to gray-beige Powder
1.410 g/cm3 @ Temp: 20 °C
93-94 °C
300 °C
110 °C
1.601
H2O: Insoluble
Store in a cool, dry place. Store in a tightly closed container.
0.00205mmHg at 25°C
Abdominal cavity-mouse LDL0: 500 mg/kg
Thermal decomposition to emit toxic bromide fumes
Insoluble in water.
Aryl Halides
3-BROMOBIPHENYL may be sensitive to light. This compound may react with oxidizing materials. (NTP, 1992)
Safety Information
II
NONH for all modes of transport
3
36/37/38
37/39-26-36
DV1750000
Xi
Warehouse ventilated, low temperature and dry
P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, P501
H315
Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)
|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 40 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should protect this material from exposure to light, and store it in a refrigerator. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
3-Bromobiphenyl Use and Manufacturing
Organic synthesis intermediates, used as raw materials for pesticide fungicides. Can be used as an industrial disinfectant.
1,1'-Biphenyl, 3-bromo-: ACTIVE|S - indicates a substance that is identified in a final Significant New Use Rule.
Computed Properties
Molecular Weight:233.10
XLogP3:4.6
Rotatable Bond Count:1
Exact Mass:231.98876
Monoisotopic Mass:231.98876
Heavy Atom Count:13
Complexity:149
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 3-Bromobiphenyl
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of fine chemicals,pharmaceutical materials -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 2113-57-7Grade: Industrial GradeContent: 99% -
CN
4 YRS
Business licensedTrader Supplier of API OLED Organic intermediate -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals
Learn More Other Chemicals
-
6-Methyl-2′,3′-dideoxyadenosine
85326-07-4
-
2-[[2-(1H-indol-3-yl)acetyl]-methylamino]-2-phenyl-N-(4-propan-2-ylphenyl)acetamide
853138-65-5
-
Phenylmethyl docosanoate
85263-74-7
-
5,6,7,8-Tetrahydro-2-naphthalenesulfonic acid Formula
93-12-9
-
6-CHLORO-3-PHENYL-2-QUINOLINOL Formula
85274-64-2
-
2,5-Furandione, dihydro-, monopolyisobutylene derivs. Formula
67762-77-0
-
N-(4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11-Heptadecafluoroundecyl)maleimide Structure
852527-40-3
-
2-Benzothiazolecarboxaldehyde,5-methoxy-(5CI) Structure
854059-90-8
-
What is Benzamide, 5-(aminosulfonyl)-N-[(2-ethyloctahydro-1H-isoindol-1-yl)methyl]-2-methoxy-, hydrochloride (1:1)
85409-39-8
-
What is 3-(2,4-Dimethylphenyl)-5-phenyl-1H-1,2,4-triazole
85303-90-8