Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Octyl methacrylate

Octyl methacrylate

Octyl methacrylate structure

Octyl methacrylate 

structure
  • CAS No:

    2157-01-9

  • Formula:

    C12H22O2

  • Chemical Name:

    Octyl methacrylate

  • Synonyms:

    2-Propenoic acid,2-methyl-,octyl ester;Methacrylic acid,octyl ester;Octyl methacrylate;ENT 8767;n-Octyl methacrylate;Capryl methacrylate

Description

PHYSICAL DESCRIPTION: Clear colorless liquid. (NTP, 1992)


N-octyl methacrylate is a clear colorless liquid. (NTP, 1992)


N-octyl methacrylate is a clear colorless liquid. (NTP, 1992)

Octyl methacrylate Basic Attributes

198.30200

198.30

218-465-5

DTXSID6025806

2916140000

Characteristics

26.30000

3.46620

N-octyl methacrylate is a clear colorless liquid. (NTP, 1992)

0.8792 g/cm3 @ Temp: 20 °C

68-72 °C @ Press: 1 Torr

94.2ºC

1.437

less than 0.1 mg/mL at 64° F (NTP, 1992)

0.0198mmHg at 25°C

Insoluble in water.

Acrylates and Acrylic Acids

Polymerizable

N-OCTYL METHACRYLATE is an acrylate ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. This material is probably stable under normal laboratory conditions, but may be heat sensitive and susceptible to polymerization during long term storage. Polymerizes to a resin. (NTP, 1992)

Safety Information

36/37/38

26-36

P261, P264, P271, P272, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P333+P313, P337+P313, P362, P363, P403+P233, P405, P501

H315

This chemical is combustible. (NTP, 1992)

|Warning|H315 (76%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 25 companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly-closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: When working with this chemical, wear a NIOSH-approved full face chemical cartridge respirator equipped with the appropriate organic vapor cartridges. If that is not available, a half face respirator similarly equipped plus airtight goggles can be substituted. However, please note that half face respirators provide a substantially lower level of protection than do full face respirators. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Octyl methacrylate Use and Manufacturing

2-Propenoic acid, 2-methyl-, octyl ester: ACTIVE

Computed Properties

Molecular Weight:198.30
XLogP3:5
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:9
Exact Mass:198.161979940
Monoisotopic Mass:198.161979940
Topological Polar Surface Area:26.3
Heavy Atom Count:14
Complexity:173
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.