Chloroethyl acrylate
-
Chloroethyl acrylate
structure -
-
CAS No:
2206-89-5
-
Formula:
C5H7ClO2
-
Chemical Name:
Chloroethyl acrylate
-
Synonyms:
2-Propenoic acid,2-chloroethyl ester;Acrylic acid,2-chloroethyl ester;Ethanol,2-chloro-,acrylate;Chloroethyl acrylate;2-Chloroethyl acrylate;Acrylic acid β-chloroethyl ester;β-Chloroethyl acrylate;NSC 18592;NSC 65162;2-Chloroethyl prop-2-enoate
-
CAS No:
Description
PHYSICAL DESCRIPTION: Insoluble in water (<1 mg/mL at 70°F) . (NTP, 1992)
Insoluble in water (<1 mg/mL at 70°F) . (NTP, 1992)
Insoluble in water (<1 mg/mL at 70°F) . (NTP, 1992)
Chloroethyl acrylate Basic Attributes
134.56100
134.56
218-619-1
XA9Y3IT710
65162|18592
1992
DTXSID8024783
2916129000
Characteristics
26.30000
0.95440
Insoluble in water (<1 mg/mL at 70°F) . (NTP, 1992)
1.111g/cm3
64-66 °C @ Press: 20 Torr
67.8ºC
1.434
Insoluble (<1 mg/ml at 70° F) (NTP, 1992)
1.53mmHg at 25°C
Highly flammable. Insoluble in water.
Halogenated Organic Compounds
Highly Flammable
2-CHLOROETHYL ACRYLATE may be sensitive to light and heat (NTP, 1992).
Safety Information
UN 1992 6.1(3) / PGIII
3
36/37/38
26-36/37/39-61-45
AS6300000
T,N
P273-P280-P301 + P310-P305 + P351 + P338
H226-H301-H318-H400
Flash point data for this chemical are not available, but it is probably combustible. (NTP, 1992)
|Danger|H226 (97.44%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P264, P270, P273, P280, P301+P310, P303+P361+P353, P305+P351+P338, P310, P321, P330, P370+P378, P391, P403+P235, P405, and P501|Aggregated GHS information provided by 39 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 131 [Flammable Liquids - Toxic]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, you should dampen the solid spill material with alcohol, then transfer the dampened material to a suitable container. Use absorbent paper dampened with alcohol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminate area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under freezer conditions. (NTP, 1992)
RECOMMENDED RESPIRATOR: When working with this chemical, wear a NIOSH-approved full face chemical cartridge respirator equipped with the appropriate organic vapor cartridges. If that is not available, a half face respirator similarly equipped plus airtight goggles can be substituted. However, please note that half face respirators provide a substantially lower level of protection than do full face respirators. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms of exposure to this compound include irritation of eyes, nose, throat and skin. ACUTE/CHRONIC HAZARDS: This material may cause irritation if allowed to contact the skin or eyes. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Volatile chemicals have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Computed Properties
Molecular Weight:134.56
XLogP3:1.1
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:4
Exact Mass:134.0134572
Monoisotopic Mass:134.0134572
Topological Polar Surface Area:26.3
Heavy Atom Count:8
Complexity:90.4
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
Acrylic acid-ethyl acrylate-methyl acrylate copolymer
28261-93-0
-
Bisphenol A-epichlorohydrin copolymer acrylate
55818-57-0
-
Acrylic acid-methyl acrylate copolymer
25302-81-2
-
Acrylic acid-ethyl acrylate copolymer Formula
25085-35-2
-
Acrylic acid-sodium acrylate copolymer Formula
9033-79-8
-
Methacrylic acid-methyl acrylate copolymer Formula
26589-39-9
-
Epoxidized soybean oil, acrylate Structure
91722-14-4
-
Hexyl acrylate Structure
2499-95-8
-
What is 2-(Acetoacetoxy)propyl acrylate
29818-16-4
-
What is 2,3-Dichloropropyl acrylate
24910-84-7