Benzenamine, 4-methoxy-, hydrochloride (1:1)
-
Benzenamine, 4-methoxy-, hydrochloride (1:1)
structure -
-
CAS No:
20265-97-8
-
Formula:
C7H9NO.ClH
-
Chemical Name:
Benzenamine, 4-methoxy-, hydrochloride (1:1)
-
Synonyms:
Benzenamine,4-methoxy-,hydrochloride (1:1);p-Anisidine,hydrochloride;Benzenamine,4-methoxy-,hydrochloride;p-Anisidine monohydrochloride;4-Methoxyaniline hydrochloride;p-Methoxyaniline hydrochloride;p-Methoxyanilinium chloride;4-Methoxybenzenamine hydrochloride
- Categories:
-
CAS No:
Description
BROWN-GREY CRYSTALLINE POWDER
Grayish-black crystalline solid or brown crystals. (NTP, 1992)
Grayish-black crystalline solid or brown crystals. (NTP, 1992)
Benzenamine, 4-methoxy-, hydrochloride (1:1) Basic Attributes
159.61
159.04500
243-657-0
7C4R75N8VG
2811
DTXSID3020093
2922299090
Characteristics
35.2
Grayish-black crystalline solid or brown crystals. (NTP, 1992)
1.23g/cm3
185-186 °C
265.9°C at 760 mmHg
114.6ºC
within almost transparency
mmo-sat 33 mg/plate ENMUDM 7(Suppl 5),1,85
This chemical may be sensitive to prolonged exposure to air and light. Insoluble in water.
Ethers
An acidic organic salt. Materials in this group are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible.
Safety Information
2811
33-26/27/28
S45-S36/37/39-S28A-S1
BZ6600000
T+
P261, P264, P270, P271, P272, P280, P285, P301+P312, P302+P352, P304+P340, P304+P341, P305+P351+P338, P312, P321, P322, P330, P332+P313, P333+P313, P337+P313, P342+P311, P362, P363, P403+P233, P405, P501
H302
Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)
|Danger|H302 (95%): Harmful if swallowed [Warning Acute toxicity, oral]|P261, P264, P270, P271, P272, P280, P285, P301+P312, P302+P352, P304+P340, P304+P341, P305+P351+P338, P312, P321, P322, P330, P332+P313, P333+P313, P337+P313, P342+P311, P362, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 40 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits very toxic fumes. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
4-anisidine
Benzenamine, 4-methoxy-, hydrochloride (1:1) Use and Manufacturing
Benzenamine, 4-methoxy-, hydrochloride (1:1): ACTIVE
Computed Properties
Molecular Weight:159.61
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:159.0450916
Monoisotopic Mass:159.0450916
Topological Polar Surface Area:35.2
Heavy Atom Count:10
Complexity:77
Covalently-Bonded Unit Count:2
Compound Is Canonicalized:Yes
Recommended Suppliers of Benzenamine, 4-methoxy-, hydrochloride (1:1)
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives
Learn More Other Chemicals
-
Benzenamine, 4-[2-(2,3-dimethylphenyl)diazenyl]-2,3-dimethyl-, hydrochloride (1:1)
66104-56-1
-
Benzenamine, 2,4,6-trichloro-, hydrochloride (1:1)
33663-50-2
-
Benzenamine, 3-chloro-4-(3-pyridinyloxy)-, hydrochloride (1:2)
1185304-58-8
-
Benzenamine, 4-[2-(2,4-dimethylphenyl)diazenyl]-2-methyl-, hydrochloride (1:1) Formula
66104-53-8
-
Benzenamine, 2,4,5-trimethyl-, hydrochloride (1:1) Formula
21436-97-5
-
Benzenamine, 2,4-dichloro-5-(1-methylethoxy)-, hydrochloride (1:1) Formula
85554-76-3
-
Benzenamine, 4-(3-piperidinyl)-, hydrochloride (1:2) Structure
19733-57-4
-
Benzenamine, 2,3-dichloro-, hydrochloride (1:1) Structure
23068-34-0
-
What is Benzenamine, 3-methyl-4-(1-pyrrolidinyl)-, hydrochloride (1:1)
68155-75-9
-
What is Benzenamine, N-[[2-chloro-3-[(phenylamino)methylene]-1-cyclopenten-1-yl]methylene]-, hydrochloride (1:1)
63856-99-5
Benzenamine, 4-methoxy-, hydrochloride (1:1)
SDSRequest for Quotation