Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Propionyl peroxide

Propionyl peroxide

Propionyl peroxide structure

Propionyl peroxide 

structure
  • CAS No:

    3248-28-0

  • Formula:

    C6H10O4

  • Chemical Name:

    Propionyl peroxide

  • Synonyms:

    Peroxide,bis(1-oxopropyl);Propionyl peroxide;Bis(1-oxopropyl) peroxide;Dipropionyl peroxide

Description

Avail- able as a 25% solution in a high-boiling hydrocar- bon, flash p 125F (51.6C).


Available only as a 25% solution. Pure material poses a severe explosion hazard. Used as an initiator in polymerization reactions.


Available only as a 25% solution. Pure material poses a severe explosion hazard. Used as an initiator in polymerization reactions.

Propionyl peroxide Basic Attributes

146.14100

146.14

221-828-0

3117

DTXSID4075299

2915900090

Characteristics

52.60000

0.80780

Available only as a 25% solution. Pure material poses a severe explosion hazard. Used as an initiator in polymerization reactions.

1.086 g/cm3

200 °C

168.7ºC at 760mmHg

59.3ºC

1.41

0.11 M

Highly flammable. May ignite spontaneously if exposed to air.

Peroxides, Organic

Highly Flammable

DIPROPIONYL PEROXIDE is a good oxidizing agent. May cause ignition of organic compounds on contact . Reacts violently with strongly reduced material such as sulfides, nitrides, and hydrides. Many produce explosions or generate gases (toxic and nontoxic). Generally, dilute solutions (<70%) are safe, but the presence of a catalyst (often a transition metal such as cobalt, iron, manganese, nickel, or vanadium) as an impurity may even then cause rapid decomposition, a buildup of heat, and even an explosion. May become explosive when evaporated to dryness or near-dryness. May explode from heat, contamination or loss of temperature control.

Safety Information

II

5.2

UN 3117

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: May explode from heat, contamination or loss of temperature control. These materials are particularly sensitive to temperature rises. Above a given "Control Temperature" they decompose violently and catch fire. May ignite combustibles (wood, paper, oil, clothing, etc.). May ignite spontaneously if exposed to air. May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect. Containers may explode when heated. Runoff may create fire or explosion hazard. (ERG, 2016)

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: The temperature of the substance must be maintained at or below the "Control Temperature" at all times. SMALL FIRE: Water spray or fog is preferred; if water not available use dry chemical, CO2 or regular foam. LARGE FIRE: Flood fire area with water from a distance. Use water spray or fog; do not use straight streams. Do not move cargo or vehicle if cargo has been exposed to heat. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. BEWARE OF POSSIBLE CONTAINER EXPLOSION. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. LARGE SPILL: Consider initial evacuation for at least 250 meters (800 feet) in all directions. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Do not touch or walk through spilled material. Stop leak if you can do it without risk. SMALL SPILL: Pick up with inert, damp, non-combustible material using clean, non-sparking tools and place into loosely covered plastic containers for later disposal. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Prevent entry into waterways, sewers, basements or confined areas. DO NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST. (ERG, 2016)

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: Fire may produce irritating, corrosive and/or toxic gases. Ingestion or contact (skin, eyes) with substance may cause severe injury or burns. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 148 [Organic Peroxides (Heat and Contamination Sensitive / Temperature Controlled)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. Contaminated clothing may be a fire risk when dry. Remove material from skin immediately. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Keep victim calm and warm. (ERG, 2016)

Propionyl peroxide Use and Manufacturing

Initiator in polymerization reactions, such as the high-pressure polymerization of ethylene.

Computed Properties

Molecular Weight:146.14
XLogP3:1.1
Hydrogen Bond Acceptor Count:4
Rotatable Bond Count:5
Exact Mass:146.05790880
Monoisotopic Mass:146.05790880
Topological Polar Surface Area:52.6
Heavy Atom Count:10
Complexity:114
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.