Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Methyl vinyl sulfone

Methyl vinyl sulfone

Methyl vinyl sulfone structure

Methyl vinyl sulfone 

structure
  • CAS No:

    3680-02-2

  • Formula:

    C3H6O2S

  • Chemical Name:

    Methyl vinyl sulfone

  • Synonyms:

    Ethene,(methylsulfonyl)-;Sulfone,methyl vinyl;(Methylsulfonyl)ethene;Methyl vinyl sulfone;Methyl vinyl sulphone;URI 718;Vinyl methyl sulfone;NSC 518304;1-Methylsulfonylethylene;Methanesulfonylethene;1-Methylsulfonylethene

  • Categories:

    Chemical Reagents  >  Organic Reagents

Description

light yellow liquid


Methyl vinyl sulfone is a clear pale yellow liquid. (NTP, 1992)


Methyl vinyl sulfone is a clear pale yellow liquid. (NTP, 1992)

Methyl vinyl sulfone Basic Attributes

106.14

106.14

878198

222-958-0

518304

2810

DTXSID1031628

2904100000

Characteristics

42.5

-0.73

Clear colorless to slightly yellow Liquid

1.2146 g/cm3 @ Temp: 20 °C

115-117 °C @ Press: 19 Torr

>230 °F

1.505

10 to 50 mg/mL at 63° F (NTP, 1992)

0-6°C

Water soluble.

Hydrocarbons, Aliphatic Unsaturated

Polymerizable

METHYL VINYL SULFONE is incompatible with oxidizing agents (NTP, 1992). Can react exothermically with reducing agents to release hydrogen gas or hydrogen sulfide. In the presence of various catalysts (such as acids) or initiatiators, can undergo exothermic polymerization reactions.

Safety Information

II

6.1

UN 2810 6.1/PG 1

3

22-27-41

26-28-36/37/39-45-28A

WR6825000

T+,T,Xi

Stable. Incompatible with strong oxidizing agents. Irritant.

P280-P302 + P350-P305 + P351 + P338-P310

H302-H310-H318

This chemical is probably combustible. (NTP, 1992)

|Danger|H302 (97.83%): Harmful if swallowed [Warning Acute toxicity, oral]|P262, P264, P270, P280, P301+P312, P302+P350, P305+P351+P338, P310, P322, P330, P361, P363, P405, and P501|Aggregated GHS information provided by 46 companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Seal the absorbent paper, as well as any of your clothing which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Wash any surfaces you may have contaminated with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)

Drug Information

SYMPTOMS: Exposure to this compound can result in irritation. ACUTE/CHRONIC HAZARDS: This chemical is a highly toxic irritant. When heated to decomposition it emits toxic fumes of sulfur oxides. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

methyl vinyl sulfone

Computed Properties

Molecular Weight:106.15
XLogP3:0.1
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:106.00885060
Monoisotopic Mass:106.00885060
Topological Polar Surface Area:42.5
Heavy Atom Count:6
Complexity:125
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Methyl vinyl sulfone

Latest News on Methyl vinyl sulfone

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.