Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Benzenesulfonyl hydrazide

Benzenesulfonyl hydrazide

Benzenesulfonyl hydrazide structure

Benzenesulfonyl hydrazide 

structure
  • CAS No:

    80-17-1

  • Formula:

    C6H8N2O2S

  • Chemical Name:

    Benzenesulfonyl hydrazide

  • Synonyms:

    Benzenesulfonic acid,hydrazide;Benzenesulfonyl hydrazide;Phenylsulfohydrazide;Porofor BSH;Benzenesulfonic hydrazide;Genitron BSH;Benzenesulfohydrazide;Phenylsulfonyl hydrazide;Phenylsulfonylhydrazine;ChKhZ 9;Porofor ChKhZ 9;Benzenesulfonylhydrazine;Benzenesulfonohydrazide;Porofor-BSH-Pulver;Celogen BSH;Nitropore OBSH;Hydrazide BSG;N-Benzenesulfonylhydrazide;BSH;BSH (blowing agent);NSC 643;Unicell BSHTM;B 3809-25G

  • Categories:

    Organic Chemistry  >  Hydrocarbons and Derivatives

Description

Benzenesulfonyl hydrazide is WHITE POWDER


Benzenesulfonyl hydrazide appears as a white to light-colored crystalline solid. Insoluble in water and denser than water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion. Readily ignited by sparks or flames and burns vigorously. Used to make other chemicals.


Benzenesulfonyl hydrazide appears as a white to light-colored crystalline solid. Insoluble in water and denser than water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion. Readily ignited by sparks or flames and burns vigorously. Used to make other chemicals.

Benzenesulfonyl hydrazide Basic Attributes

172.2

172.20

640079

201-255-2

AC8C87U2TA

643

3226

DTXSID0052548

29350090

Characteristics

80.6

-0.14

Benzenesulfonyl hydrazide appears as a white to light-colored crystalline solid. Insoluble in water and denser than water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion. Readily ignited by sparks or flames and burns vigorously. Used to make other chemicals.

1.4±0.1 g/cm3

102 °C

333.5±25.0 °C at 760 mmHg

110 °C

1.589

Flammables area

Oral-Rat LDL0: 50 mg/kg

Inflammable in case of open flame, high temperature, oxidant; combustion produces toxic nitrogen oxide and sulfur oxide fumes

Insoluble in water.

Azo, Diazo, Azido, Hydrazine, and Azide Compounds

Self-decomposition or self-ignition may be triggered by heat, chemical reaction, friction or impact. May be ignited by heat, sparks or flames.

Safety Information

II

4.1

UN 3226 4.1

3

11

15-16-22-24/25

DB6888000

F

Treasury is ventilated, low temperature and dry; stored separately from oxidant

P210, P220, P234, P240, P241, P264, P270, P280, P301+P312, P330, P370+P378, P403+P235, P411, P420, P501

H242

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: Self-decomposition, self-polymerization, or self-ignition may be triggered by heat, chemical reaction, friction or impact. May be ignited by heat, sparks or flames. Some may decompose explosively when heated or involved in a fire. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. May burn violently. Decomposition or polymerization may be self-accelerating and produce large amounts of gases. Vapors or dust may form explosive mixtures with air. (ERG, 2016)

|Warning|H228 (10.64%): Flammable solid [Danger Flammable solids]|P210, P220, P234, P240, P241, P264, P270, P280, P301+P312, P330, P370+P378, P403+P235, P411, P420, and P501|Aggregated GHS information provided by 48 companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: SMALL FIRE: Dry chemical, CO2, water spray or regular foam. LARGE FIRE: Flood fire area with water from a distance. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: BEWARE OF POSSIBLE CONTAINER EXPLOSION. Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. LARGE SPILL: Consider initial evacuation for at least 250 meters (800 feet) in all directions. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Stop leak if you can do it without risk. SMALL SPILL: Pick up with inert, damp, non-combustible material using clean, non-sparking tools and place into loosely covered plastic containers for later disposal. Prevent entry into waterways, sewers, basements or confined areas. (ERG, 2016)

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Toxicity

most toxic

Drug Information

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death. May produce irritating, toxic and/or corrosive gases. Runoff from fire control may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 149 [Substances (Self-Reactive)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Keep victim calm and warm. (ERG, 2016)

benzenesulfohydrazide

Benzenesulfonyl hydrazide Use and Manufacturing

Methods of Manufacturing

Derived from the reaction of benzenesulfonyl chloride and hydrazine. The reaction is carried out in the presence of hydroxides and carbonates of alkali metals.

Uses

Gas generating agent for use in making foam rubber and foam plastics.

Benzenesulfonic acid, hydrazide: ACTIVE

Computed Properties

Molecular Weight:172.21
XLogP3:-0.1
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:4
Rotatable Bond Count:2
Exact Mass:172.03064868
Monoisotopic Mass:172.03064868
Topological Polar Surface Area:80.6
Heavy Atom Count:11
Complexity:201
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Benzenesulfonyl hydrazide

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.