Methylcyclohexylamine
-
Methylcyclohexylamine
structure -
-
CAS No:
100-60-7
-
Formula:
C7H15N
-
Chemical Name:
Methylcyclohexylamine
-
Synonyms:
Cyclohexanamine,N-methyl-;Cyclohexylamine,N-methyl-;N-Methylcyclohexanamine;N-Methylcyclohexylamine;Cyclohexylmethylamine;Methylcyclohexylamine;N-Methyl-N-cyclohexylamine;N-Cyclohexylmethylamine;N-Cyclohexyl-N-methylamine;(Methylamino)cyclohexane;NSC 434;SC 79B
- Categories:
-
CAS No:
Description
clear colourless to yellow liquidChEBI: A secondary aliphatic amine having methyl and cyclohexyl as the two alkyl groups.A water-white liquid. Slightly soluble in water and floats on water. A strong irritant to skin and eyes. Corrosive. Used as a solvent.
Methyl cyclohexylamine appears as a water-white liquid. Slightly soluble in water and floats on water. A strong irritant to skin and eyes. Corrosive. Used as a solvent.
Methyl cyclohexylamine appears as a water-white liquid. Slightly soluble in water and floats on water. A strong irritant to skin and eyes. Corrosive. Used as a solvent.|N-methylcyclohexylamine is a secondary aliphatic amine having methyl and cyclohexyl as the two alkyl groups. It has a role as a human xenobiotic metabolite.
Methylcyclohexylamine Basic Attributes
113.204
113.20
202-869-3
YH8PF4C1OW
434
2924
DTXSID3059216
29213099
Characteristics
12
1.63
Methyl cyclohexylamine appears as a water-white liquid. Slightly soluble in water and floats on water. A strong irritant to skin and eyes. Corrosive. Used as a solvent.
0.8518 g/cm3 @ Temp: 20 °C
−9-−7 °C(lit.)
147 °C
85 °F
n 20/D 1.456(lit.)
5.4 g/100 mL (20 ºC)Flammable. Slightly soluble in water.
11 mm Hg ( 40 °C)
4 (vs air)
2.2-10.5%(V)
Flammable. Slightly soluble in water.
Amines, Phosphines, and Pyridines
Highly Flammable
METHYL CYCLOHEXYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Safety Information
II
8
UN 2734 8/PG 2
1
R10;R20/21/22;R35
16-26-36/37/39-45
GX1529000
C
P261-P280-P305 + P351 + P338-P310
H226-H302 + H312-H314-H331
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)
|Danger|H226 (99.49%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P234, P240, P241, P242, P243, P260, P261, P264, P270, P271, P273, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P311, P312, P321, P322, P330, P361, P363, P370+P378, P390, P403+P233, P403+P235, P404, P405, and P501|Aggregated GHS information provided by 198 companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Some of these materials may react violently with water. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. LARGE FIRE: Water spray, fog or alcohol-resistant foam. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. Do not get water inside containers. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Fully encapsulating, vapor-protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb with earth, sand or other non-combustible material and transfer to containers (except for Hydrazine). Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: May cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)
Methylcyclohexylamine Use and Manufacturing
Intermediate, solvent, acid acceptor.
Cyclohexanamine, N-methyl-: ACTIVE
Computed Properties
Molecular Weight:113.20
XLogP3:1.6
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:1
Exact Mass:113.120449483
Monoisotopic Mass:113.120449483
Topological Polar Surface Area:12
Heavy Atom Count:8
Complexity:55.4
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Methylcyclohexylamine
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst,Chemical Materials,Chem&Pharm Intermediates,Organic Intermediates,Feed AdditiveInquiryCAS No.: 100-60-7Grade: Industrial GradeContent: 99% -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals -
CN
3 YRS
Business licensedTrader Supplier of api,Intermediates,Organic Chemistry,Inorganic Chemistry,Daily Chemicals,Cosmetic Raw Materals,CATALYST AND AUXILIARY,FLAVORS AND FRAGRANCES,Chemical Pesticides,ADDITIVE
Learn More Other Chemicals
-
(3S)-1,2,3,4-Tetrahydro-6,7-dimethoxy-3-isoquinolinecarboxylic acid
103733-66-0
-
2-Methoxy-5-methyl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine
1083168-84-6
-
2-iodo-2,3-dihydroinden-1-one
113021-30-0
-
2,2-DIMETHYL-N-[3-(4,4,5,5-TETRAMETHYL-[1,3,2]DIOXABOROLAN-2-YL)-PYRIDIN-2-YL]-PROPIONAMIDE Formula
532391-30-3
-
6-Methylbenzoxazole Formula
10531-80-3
-
Methyl N-formylanthranilate Formula
41270-80-8
-
1-(4-amino-3,5-dichlorophenyl)-2-(dimethylamino)ethanol Structure
4812-69-5
-
2,5-Dihydroxy-N-(2-hydroxyethyl)benzamide Structure
61969-53-7
-
What is Benzenemethanol, α-(aminomethyl)-4-(1-methylethyl)-
91339-24-1
-
What is 5-Hydroxy-2-iodobenzaldehyde
50765-11-2