4-(3-Aminopropyl)morpholine
-
4-(3-Aminopropyl)morpholine
structure -
-
CAS No:
123-00-2
-
Formula:
C7H16N2O
-
Chemical Name:
4-(3-Aminopropyl)morpholine
-
Synonyms:
4-Morpholinepropanamine;Morpholine,4-(3-aminopropyl)-;γ-Morpholinopropylamine;N-(3-Aminopropyl)morpholine;4-(γ-Aminopropyl)morpholine;1-Amino-3-morpholinopropane;3-Morpholinopropylamine;3-Amino-1-(morpholino)propane;4-(3-Aminopropyl)morpholine;3-(4-Morpholinyl)propylamine;3-(N-Morpholino)-1-aminopropane;3-Morpholinopropanamine;3-(Morpholino)-n-propylamine;3-(4-Morpholinyl)propanamine;3-(4-Morpholinyl)-1-propanamine;1-Morpholino-3-aminopropane;NSC 1081;3-(4-Morpholinyl)-1-propylamine;3-(Morpholin-4-yl)propylamine;3-(4-Morpholino)propylamine;[3-(4-Morpholinyl)propan-1-yl]amine;[3-(Morpholino)propan-1-yl]amine;N-Morpholino-3-propylamine;3-(Morpholin-4-yl)propan-1-amine
- Categories:
-
CAS No:
Description
Clear liquidChEBI: A member of the class of morpholines that is morpholine substituted by a 3-aminopropyl group a the N atom.A colorless liquid with a faint, fishlike odor. Burns, but requires some effort to ignite. Corrosive to tissue. Produces toxic oxides of nitrogen during combustion.
N-aminopropylmorpholine appears as a colorless liquid with a faint, fishlike odor. Burns, but requires some effort to ignite. Corrosive to tissue. Produces toxic oxides of nitrogen during combustion.|Liquid
N-aminopropylmorpholine appears as a colorless liquid with a faint, fishlike odor. Burns, but requires some effort to ignite. Corrosive to tissue. Produces toxic oxides of nitrogen during combustion.|3-morpholinopropylamine is a member of the class of morpholines that is morpholine substituted by a 3-aminopropyl group a the N atom. It is a member of morpholines and a primary amino compound. It derives from a morpholine.
4-(3-Aminopropyl)morpholine Basic Attributes
144.218
144.21
204-590-2
9A09425QD6
1081
2735
DTXSID4041521
29349990
Characteristics
38.5
-0.7
N-aminopropylmorpholine appears as a colorless liquid with a faint, fishlike odor. Burns, but requires some effort to ignite. Corrosive to tissue. Produces toxic oxides of nitrogen during combustion.
0.9902 g/cm3 @ Temp: 15 °C
-15 °C
220 °C
210 °F
n 20/D 1.4761(lit.)
soluble in water.
0.294mmHg at 25°C
4.97
LD50 orl-rat: 3560 mg/kg UCDS** 3/25/70
Soluble in water.
Amines, Phosphines, and Pyridines
N-AMINOPROPYLMORPHOLINE behaves as an amine. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Safety Information
II
8
UN 2735 8/PG 2
2
R21/22;R34
26-36/37/39-45-S45-S36/37/39-S26
QD7700000
C,Xi
P280-P305 + P351 + P338-P310
H312-H314
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2016)
|Danger|H302 (86.62%): Harmful if swallowed [Warning Acute toxicity, oral]|P260, P264, P270, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P363, P405, and P501|Aggregated GHS information provided by 665 companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: SMALL FIRE: Dry chemical, CO2 or water spray. LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)|Corrosives
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)
4-(3-Aminopropyl)morpholine Use and Manufacturing
Fiber synthesis; chemical intermediate.
Functional fluids (closed systems)
Water treatment products
All other basic inorganic chemical manufacturing|4-Morpholinepropanamine: ACTIVE
Health Hazards -> Corrosives
Computed Properties
Molecular Weight:144.21
XLogP3:-0.7
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:3
Exact Mass:144.126263138
Monoisotopic Mass:144.126263138
Topological Polar Surface Area:38.5
Heavy Atom Count:10
Complexity:81.7
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 4-(3-Aminopropyl)morpholine
-
CN
5 YRS
Business licensedDistributor Supplier of DIMETHYL SULFOXIDE,NMP,MMTInquiryUnit Price: $2200-2300 /MT FOBCAS No.: 123-00-2Content: 99% -
CN
2 YRS
Business licensedTrader Supplier of Fine chemicals,Pharmaceutical Intermediates -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals
Learn More Other Chemicals
-
Disodium 2-hydroxy-2-sulfinatoacetate
223106-41-0
-
Ethyl 2,3-O-(1-methylethylidene)-D-ribofuranoside
173532-18-8
-
Ebracteolatanolide A
212563-72-9
-
3-ethoxypyridin-2-ol Formula
909854-16-6
-
5-(2-Ethoxy-5-nitrophenyl)-1,6-dihydro-1-Methyl-3-propyl-7H-pyrazolo[4,3-d]pyriMidin-7-one Formula
147676-99-1
-
3-(9,10-Dihydro-9,10-ethanoanthracen-9-yl)-2-propenal Formula
38849-09-1
-
5-(AcetyliMino)-4,5-dihydro-4-Methyl-1,3,4-thiadiazole-2-sulfonic Acid-d3 Structure
1795143-17-7
-
Alkanes, C4-6 Structure
70955-08-7
-
What is alpha-D-ribo-Hexopyranoside,methyl2,3,6-trideoxy-2-[[(phenylmethoxy)carbonyl]amino]-(9CI)
494868-08-5
-
What is Ambersorb 572
148618-33-1