Methylbutylamine

87.16

87.16

1209231

203-791-2

61NTK0473L

2945

DTXSID9059389

Liquid

29211999

12

1.33

N-methylbutylamine appears as a water-white liquid with an ammonia-like odor. Density 0.736 g / cm3 and flash point 35°F (Aldrich). Vapors heavier than air. Used to make other chemicals.

0.7637 g/cm³ @ Temp: 15 °C

-75 °C

91 °C

35 °F

n 20/D 1.3995(lit.)

Miscible in water

Flammables area

50 mm Hg at 25 deg C (est)

3.0 (AIR= 1)

Oral-Rat LD50: 420 mg/kg; inhalation-rat LC50: p2000 PPM/ 4 hours

Inflammable in case of open flame, high temperature, oxidant; burning produces toxic nitrogen oxide fumes

1.3%(V)

Henry's Law constant = 3.9X10-5 atm-cu m/mol at 25 °C (est)

pKa = 10.9 (conjugate acid)

Hydroxyl radical reaction rate constant = 7.8X10-11 cu cm/,olec-sec at 25 °C (est)

Highly flammable. Slightly soluble in water.

Amines, Phosphines, and Pyridines

Highly Flammable

N-METHYLBUTYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

II

3

UN 2945 3/PG 2

3

11-20/21/22-34

16-26-36/37/39-45

EO5250000

F,C

The warehouse is ventilated, low temperature and dry; stored separately from oxidants and acids

P210-P280-P305 + P351 + P338-P310

H225-H302 + H332-H311-H314

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.|/Absorb small spills with paper and/ burn the paper in a suitable location away from combustible materials. Large quantities can be reclaimed or collected & atomized in suitable combustion chamber equipped with appropriate effluent gas cleaning device.

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 3rd degree

|Danger|H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]|P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P361, P363, P370+P378, P403+P235, P405, and P501|Aggregated GHS information provided by 43 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Fully encapsulating, vapor-protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb with earth, sand or other non-combustible material and transfer to containers (except for Hydrazine). Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)|SRP: When working with strong solutions of acids or bases or other caustic or corrosive materials, always wear a full face mask. When working with caustic or corrosive gases or vapors, a full face mask will not protect the eyes or prevent inhaling the material. A full face respirator is required.|Personnel protection: ... Wear appropriate chemical protective gloves, boots and goggles.

FLAMMABLE LIQUID WHEN EXPOSED TO HEAT, SPARKS, OR FLAME.

ALCOHOL FOAM|If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Use "alcohol" foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.|If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away.Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors.|Personnel protection: Avoid breathing vapors. Keep upwind. ... Do not handle broken packages unless wearing appropriate personal protective equipment. If contact with the material anticipated, wear appropriate chemical protective clothing.

/GUIDE 132: FLAMMABLE LIQUIDS - CORROSIVE/ Fire or Explosion: Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.|/GUIDE 132: FLAMMABLE LIQUIDS - CORROSIVE/ Health: May cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.|/GUIDE 132: FLAMMABLE LIQUIDS - CORROSIVE/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate closed spaces before entering.|/GUIDE 132: FLAMMABLE LIQUIDS - CORROSIVE/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.|For more DOT Emergency Guidelines (Complete) data for BUTYLMETHYLAMINE (8 total), please visit the HSDB record page.

No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./|The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article.

A skin and severe eye irritant.

| 3 - Materials that, under emergency conditions, can cause serious or permanent injury.| 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions.| 0 - Materials that in themselves are normally stable, even under fire conditions.

Butylmethylamine is a constituent of tobacco smoke(1).

moderately toxic

LD50 Rat oral 420 mg/kg|LD50 Mouse ip 471 mg/kg|LD50 Mouse iv 122 mg/kg|LD50 Rabbit dermal 1260 mg/kg

... amines from decomposing fish ... /Amines/|Aliphatic amines, including butylmethylamine were identified, not quantified, in tobacco leaves(1).

Butylmethylamine's production and use as a chemical intermediate(1) may result in its release to the environment through various waste streams(SRC).

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 130(SRC), determined from a log Kow of 1.33(2) and a regression-derived equation(3), indicates that butylmethylamine is expected to have high mobility in soil(SRC). The pKa of butylmethylamine is 10.9(4) indicating that this compound will exist almost entirely in the cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5). Volatilization of butylmethylamine from moist soil surfaces is not expected to be an important fate process given its cationic state(SRC). Butylmethylamine is expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 50 mm Hg(SRC), determined from a fragment constant method(6).|AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 130(SRC), determined from a log Kow of 1.33(2) and a regression-derived equation(3), indicates that butylmethylamine is expected to adsorb to suspended solids and sediment(SRC). A pKa of 10.9(4) indicates butylmethylamine will exist almost entirely in the cation form at pH values of 5 to 9 and therefore volatilization from water surfaces is not expected to be an important fate process(5). According to a classification scheme(6), an estimated BCF of 2(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC).|ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), butylmethylamine, which has an estimated vapor pressure of 50 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase butylmethylamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5 hours(SRC), calculated from its rate constant of 7.8X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Butylmethylamine does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC).

The rate constant for the vapor-phase reaction of butylmethylamine with photochemically-produced hydroxyl radicals has been estimated as 7.8X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 5 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). Butylmethylamine is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(2). Butylmethylamine does not contain chromophores that absorb at wavelengths >290 nm(2) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC).

An estimated BCF of 2 was calculated in fish for butylmethylamine(SRC), using a log Kow of 1.33(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

The Koc of butylmethylamine is estimated as 130(SRC), using a log Kow of 1.33(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that butylmethylamine is expected to have high mobility in soil. The pKa of butylmethylamine is 10.9(4) indicating that this compound will exist almost entirely in the cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).

A pKa of 10.9(1) indicates butylmethylamine will exist almost entirely in the cation form at pH values of 5 to 9 and therefore volatilization from water surfaces and moist soil surfaces is not expected to be an important fate process(2). Butylmethylamine is expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 50 mm Hg(SRC), determined from a fragment constant method(3).

Butylmethylamine was detected in evaporated milk at a concentration of 0.2 ppm(1).

Butylmethylamine was detected in evaporated milk at a concn of 0.2 ppm(1).

NIOSH (NOES Survey 1981-1983) has statistically estimated that 851 workers (187 of these are female) are potentially exposed to butylmethylamine in the US(1). Occupational exposure to butylmethylamine may occur through inhalation and dermal contact with this compound at workplaces where butylmethylamine is produced or used(SRC). Monitoring data indicate that the general population may be exposed to butylmethylamine via ingestion of evaporated milk and use of tobacco products(SRC).

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: May cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mg/kg up to 200 ml of water for dilution if the patent can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . Cover skin burns with dry sterile dressings after decontamination ... . /Organic bases/Amines and related compounds/|Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. If patient is unresponsive to these measures, vasopressors may be helpful. Watch for signs of fluid overload ... . Administer 1% solution methylene blue if patient is symptomatic with severe hypoxia, cyanosis, and cardiac compromise not responding to oxygen. ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Organic bases/Amines and related compounds/

/OTHER TOXICITY INFORMATION/ Since the amines are bases and may form strongly alkaline solutions, they can be damaging if splashed in the eye or if allowed to contaminate the skin. Otherwise they have no specific toxic properties, and the lower aliphatic amines are normal constituents of body tissues, so that they occur in a large number of foods, particularly fish, to which they impart a characteristic odor. One area of concern at present is the possibility that some aliphatic amines may react with nitrate or nitrite in vivo to form nitroso compounds, many of which are known to be potent carcinogens in animals ... . /Aliphatic amines/

1-Butanamine, N-methyl-: ACTIVE

ANALYTE: ALIPHATIC AMINES; MATRIX: AIR; RANGE: 1 TO 2400 MG/CU M IN A 10-L SAMPLE OF AIR; PROCEDURE: ADSORPTION ON SILICA GEL; ELUTION WITH ACID; GC ANALYSIS. /ALIPHATIC AMINES/|GLASS CAPILLARY GAS CHROMATOGRAPHY OF SECONDARY AMINES IN FOODS WITH FLAME PHOTOMETRIC DETECTION AFTER DERIVATIZATION WITH BENZENESULFONYL CHLORIDE.

Fire Hazards -> Flammable - 3rd degree