Isopropyl methacrylate
-
Isopropyl methacrylate
structure -
-
CAS No:
4655-34-9
-
Formula:
C7H12O2
-
Chemical Name:
Isopropyl methacrylate
-
Synonyms:
2-Propenoic acid,2-methyl-,1-methylethyl ester;Methacrylic acid,isopropyl ester;Isopropyl methacrylate;Isopropyl 2-methyl-2-propenoate;1-Methylethyl 2-methylpropenoate;Isopropyl 2-methylacrylate;NSC 32625
-
CAS No:
Description
PHYSICAL DESCRIPTION: Clear colorless liquid. (NTP, 1992)
Isopropyl methacrylate is a clear colorless liquid. (NTP, 1992)
Isopropyl methacrylate is a clear colorless liquid. (NTP, 1992)
Isopropyl methacrylate Basic Attributes
128.16900
128.17
225-094-2
URP39ZM4BM
32625
1993
DTXSID6022218
2916140000
Characteristics
26.30000
1.51410
Isopropyl methacrylate is a clear colorless liquid. (NTP, 1992)
0.8869 g/cm3 @ Temp: 20 °C
-62.68°C (estimate)
125 °C
31ºC
1.415
Insoluble (<1 mg/ml at 70° F) (NTP, 1992)
Highly flammable. Insoluble in water.
Acrylates and Acrylic Acids
Highly Flammable
ISOPROPYL METHACRYLATE may be sensitive to heat and light during long term storage. It can also polymerize.(NTP, 1992)
Safety Information
III
6.1(b)
UN 3272
10-36/37/38
16-26-36
P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P272, P280, P284, P301+P310, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P332+P313, P333+P313, P337+P313, P361, P362, P363, P370+P378, P403+P233, P403+P235, P405, P501
H226
This chemical is flammable. (NTP, 1992)
|Danger|H226 (75%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P272, P280, P284, P301+P310, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P332+P313, P333+P313, P337+P313, P361, P362, P363, P370+P378, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 4 companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with alcohol followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under freezer conditions. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. RECOMMENDED GLOVE MATERIALS: It is recommended that two different glove types be used for best protection. However, if this chemical makes direct contact with your gloves, or if a tear, puncture or hole develops, remove them at once. SUGGESTED GLOVES: Butyl rubber, PVA (NTP, 1992)
Drug Information
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Isopropyl methacrylate Use and Manufacturing
2-Propenoic acid, 2-methyl-, 1-methylethyl ester: ACTIVE
Computed Properties
Molecular Weight:128.17
XLogP3:2.2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:3
Exact Mass:128.083729621
Monoisotopic Mass:128.083729621
Topological Polar Surface Area:26.3
Heavy Atom Count:9
Complexity:125
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
1,4-Butanediol dimethacrylate-methyl methacrylate copolymer
26950-76-5
-
Butyl methacrylate-dimethylaminoethyl methacrylate-methyl methacrylate copolymer
24938-16-7
-
2-AMINO-BENZOTHIAZOLE-6-CARBOXYLIC ACID ISOPROPYL ESTER
134949-38-5
-
(((2-(6-aMino-9H-purin-9-yl)ethoxy)Methyl)phosphoryl)bis(oxy)bis(Methylene) isopropyl dicarbonate Formula
365417-53-4
-
2-AMINO-4-(4-SEC-BUTYL-PHENYL)-THIOPHENE-3-CARBOXYLIC ACID ISOPROPYL ESTER Formula
351157-00-1
-
2-AMINO-5-CARBAMOYL-4-METHYL-THIOPHENE-3-CARBOXYLIC ACID ISOPROPYL ESTER Formula
350988-33-9
-
2,4-DICHLORO-5-[5-(2-CHLOROPHENYL)-1H-1,2,3,4-TETRAAZOL-1-YL]PHENYL ISOPROPYL ETHER Structure
338961-45-8
-
Acrylamide-N,N-dimethylaminoethyl methacrylate copolymer Structure
25568-39-2
-
What is Isopropyl octanoate
5458-59-3
-
What is Isopropyl hexanoate
2311-46-8