Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Ethylenediaminetetraacetic acid trisodium salt solution

Ethylenediaminetetraacetic acid trisodium salt solution

Ethylenediaminetetraacetic acid trisodium salt solution structure

Ethylenediaminetetraacetic acid trisodium salt solution 

structure
  • CAS No:

    150-38-9

  • Formula:

    C10H13N2Na3O8·2H2O

  • Chemical Name:

    Ethylenediaminetetraacetic acid trisodium salt solution

  • Synonyms:

    (ethylenedinitrilo)tetra-aceticacitrisodiumsalt;ETHYLENEDIAMINETETRAACETIC ACID SODIUM SALT SOLUTION;EDTA TRISODIUM SALT;TRISODIUM EDTA;ETHYLENEDIAMINETETRAACETIC ACID, TRISODIUM SALT MONOHYDRATE;ETHYLENEDIAMINETETRAACETIC ACID TRISODIUM SALT HYDRATE;Ethylenediaminetetraacetic acid trisodium salt solution;(ETHYLENEDINITRILO)TETRAACETIC ACID, TRISODIUM SALT MONOHYDRATE;(ETHYLENEDINITRILO)TETRAACETIC ACID, TRISODIUM SALT HYDRATE

  • Categories:

    Cosmetic Ingredient  >  Chelating

Description

Ethylenediaminetetraacetic acid (EDTA) trisodium salt is used to bind metal ions in the practice of chelation therapy, for treating mercury and lead poisoning, used in a similar manner to remove excess iron from the body, for treating the complication of repeated blood transfusions, as would be applied to treat thalassaemia.


Ethylenediamine tetraacetic acid, trisodium salt is an odorless white crystalline powder. pH (1% aqueous solution) 9.3. pH (10% aqueous solution) about 8.3-8.7. (NTP, 1992)|DryPowder


Ethylenediamine tetraacetic acid, trisodium salt is an odorless white crystalline powder. pH (1% aqueous solution) 9.3. pH (10% aqueous solution) about 8.3-8.7. (NTP, 1992)|EDTA trisodium salt is the organic sodium salt of ethylenediaminetetraacetic acid (EDTA) in which three sodium cations are associated with one trianion of EDTA. It contains an EDTA(3-).


white powder


Poison by intraperitoneal route. Moderately toxic by ingestion. When heated to decomposition it emits toxic fumes of NOx and Na2O.

Ethylenediaminetetraacetic acid trisodium salt solution Basic Attributes

394.22

358.036498

205-758-8

420IP921MB

TSCA listed

DTXSID7020556

White to off-white

29173990

Characteristics

182.63000

-6.20390

Liquid

1.69[at 20℃]

237 °C

614.2ºC at 760 mmHg

325.2ºC

212.9g/L at 20℃

+15C to +30C

0.007Pa at 50℃

Not classified

8

Slightly water soluble.

Amines, Phosphines, and Pyridines

Aqueous solutions of Ethylenediaminetetraacetic acid trisodium salt solution react with aluminum to produce hydrogen. Oxidizers should be avoided.

Inert atmosphere,Room Temperature

Safety Information

3

Xi

26-36-24/25-22-36/37

AH5250000

Xi

Stable. Incompatible with strong oxidizing agents, copper, aluminium.

36/37/38

Literature sources indicate that Ethylenediaminetetraacetic acid trisodium salt solution is noncombustible.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this chemical under ambient temperatures, and keep it away from all oxidizing materials. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

SYMPTOMS: Symptoms of exposure to this compound may include coughing, wheezing, respiratory distress and mucous membrane irritation upon inhalation. It is a strong chelating agent and ingestion of large amounts may cause hypocalcemic tetany with spontaneous recovery. This compound may cause skin irritation, an eye contact may cause pain and slight transient irritation. ACUTE/CHRONIC HAZARDS: When heated to decomposition this chemical may emit toxic fumes of carbon monoxide, carbon dioxide, oxides of nitrogen and ammonia. It may also emit very toxic fumes of disodium oxide. This compound may present a dust explosion hazard. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Ethylenediaminetetraacetic acid trisodium salt solution Use and Manufacturing

Uses

Preservative and color retention agent in foods, flavoring agent.As antioxidant in foods.Pharmaceutic aid (chelating agent); anticoagulant for blood collection.Chelating agent in personal care products, in pulp and paper industry, in laboratory titrimetric analysis of metals and solubilization of metal Compounds.


Ion exchange agents


chelating agent, antioxidant

All other basic organic chemical manufacturing|Glycine, N,N'-1,2-ethanediylbis[N-(carboxymethyl)-, sodium salt (1:3): ACTIVE

Cosmetics -> Chelating

Computed Properties

Molecular Weight:358.19
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:10
Rotatable Bond Count:8
Exact Mass:358.03649822
Monoisotopic Mass:358.03649822
Topological Polar Surface Area:164
Heavy Atom Count:23
Complexity:351
Covalently-Bonded Unit Count:4
Compound Is Canonicalized:Yes

Drug Function and Efficacy

Chelating agent that binds metal ions to improve stability and prolong shelf life of formulations

This ingredient has been used in drugs with the following functions (note: it does not mean that the ingredient itself has the following health functions)

Related Drugs

Recommended Suppliers of Ethylenediaminetetraacetic acid trisodium salt solution

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.