Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 2-Iodobutane

2-Iodobutane

2-Iodobutane structure

2-Iodobutane 

structure
  • CAS No:

    513-48-4

  • Formula:

    C4H9I

  • Chemical Name:

    2-Iodobutane

  • Synonyms:

    Butane,2-iodo-;2-Iodobutane;sec-Butyl iodide;sec-Iodobutane;2-Butyl iodide;(±)-2-Iodobutane;NSC 8422;52152-71-3

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

Description

liquid


2-iodobutane appears as a colorless liquid. Less dense than water. Vapors heavier than air. Used to make other chemicals and as a solvent.


2-iodobutane appears as a colorless liquid. Less dense than water. Vapors heavier than air. Used to make other chemicals and as a solvent.

2-Iodobutane Basic Attributes

184.02

184.02

1718777

208-163-1

8422

2390

DTXSID40858729

29033080

Characteristics

0

2.91

2-iodobutane appears as a colorless liquid. Less dense than water. Vapors heavier than air. Used to make other chemicals and as a solvent.

1.585 g/cm3 @ Temp: 20 °C

-104 °C

120 °C

75 °F

1.501

Insoluble in water. soluble inalcohol and diethyl ether.alcohol: soluble (lit.)

Flammables area

17.10 mmHg

Reference value Abdominal cavity-rat LD50: 1241 mg/kg

In case of fire, high temperature, oxidant is flammable; high heat decomposes toxic iodide gas

Highly flammable. Slightly soluble in water.

Halogenated Organic Compounds

Highly Flammable

Halogenated aliphatic compounds, such as 2-IODOBUTANE, are moderately or very reactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Low molecular weight haloalkanes are highly flammable and can react with some metals to form dangerous products. Materials in this group are incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.

Safety Information

II

3

UN 2390 3/PG 2

3

10-36/37/38

26-36

EK4410000

Xi,F

The warehouse is ventilated, low temperature, dry and protected from light; stored separately from oxidants

Irritant/Flammable/Light Sensitive

Stable. Flammable. Incompatible with strong oxidizing agents. Light sensitive.

P210-P370 + P378

H226

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 3rd degree, Reactive - 2nd degree

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. Do not use dry chemical extinguishers to control fires involving nitromethane (UN1261) or nitroethane (UN2842). LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Toxicity

moderately toxic

Drug Information

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

2-Iodobutane Use and Manufacturing

Uses

For organic synthesis

Butane, 2-iodo-: ACTIVE

Fire Hazards -> Flammable - 3rd degree, Reactive - 2nd degree

Computed Properties

Molecular Weight:184.02
XLogP3:2.8
Rotatable Bond Count:1
Exact Mass:183.97490
Monoisotopic Mass:183.97490
Heavy Atom Count:5
Complexity:19.6
Undefined Atom Stereocenter Count:1
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 2-Iodobutane

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.