Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > N-(3-Ethoxyphenyl)acetamide

N-(3-Ethoxyphenyl)acetamide

N-(3-Ethoxyphenyl)acetamide structure

N-(3-Ethoxyphenyl)acetamide 

structure
  • CAS No:

    591-33-3

  • Formula:

    C10H13NO2

  • Chemical Name:

    N-(3-Ethoxyphenyl)acetamide

  • Synonyms:

    Acetamide,N-(3-ethoxyphenyl)-;m-Acetophenetidide;N-(3-Ethoxyphenyl)acetamide;3-Ethoxyacetanilide;3′-Ethoxyacetanilide;N-Acetyl-m-phenetidine;m-Ethoxyacetanilide;NSC 7650

Description

LIGHT BEIGE AMORPHOUS POWDER


N-(3-ethoxyphenyl)acetamide is a gray plates (in H2O). (NTP, 1992)


N-(3-ethoxyphenyl)acetamide is a gray plates (in H2O). (NTP, 1992)

N-(3-Ethoxyphenyl)acetamide Basic Attributes

179.22

179.22

209-713-3

0X00AE1BZW

7650

DTXSID8060450

2924299090

Characteristics

38.3

2.11670

N-(3-ethoxyphenyl)acetamide is a gray plates (in H2O). (NTP, 1992)

1.099g/cm3

60.5-61 °C @ Solvent: Ligroine

197-198 °C @ Press: 3 Torr

164.8ºC

1.548

Soluble (NTP, 1992)

Oral-Mouse LD50: 1250 mg/kg

Open flame is flammable; high heat releases toxic nitrogen oxide gas

Water soluble.

Amides and Imides

N-(3-ETHOXYPHENYL)ACETAMIDE is an example of an amide. Amides/imides react with azo and diazo compounds to generate toxic gases. Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx).

Safety Information

22

22

AM4300000

Xn

Treasury is ventilated at low temperature and dry; stored separately from oxidants and food additives

P264, P270, P301+P312, P330, P501

H302

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

|Warning|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P301+P312, P330, and P501|Aggregated GHS information provided by 4 companies from 1 notifications to the ECHA C&L Inventory.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Toxicity

moderately toxic

Drug Information

ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

N-(3-Ethoxyphenyl)acetamide Use and Manufacturing

Acetamide, N-(3-ethoxyphenyl)-: INACTIVE

Computed Properties

Molecular Weight:179.22
XLogP3:1.8
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:3
Exact Mass:179.094628657
Monoisotopic Mass:179.094628657
Topological Polar Surface Area:38.3
Heavy Atom Count:13
Complexity:170
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.