Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Tetraphenoxysilane

Tetraphenoxysilane

Tetraphenoxysilane structure

Tetraphenoxysilane 

structure
  • CAS No:

    1174-72-7

  • Formula:

    C24H20O4Si

  • Chemical Name:

    Tetraphenoxysilane

  • Synonyms:

    Silicic acid (H4SiO4),tetraphenyl ester;Phenyl silicate ((PhO)4Si);Silane,tetraphenoxy-;Tetraphenoxysilane;Tetraphenyl silicate;Tetraphenyl orthosilicate;NSC 252166

  • Categories:

    Organic Chemistry  >  Inorganic Acid Esters

Description

White powder or light pink chunky solid.


Tetraphenoxysilane appears as white powder or light pink chunky solid. (NTP, 1992)


Tetraphenoxysilane appears as white powder or light pink chunky solid. (NTP, 1992)

Tetraphenoxysilane Basic Attributes

400.5

400.50

214-638-4

0D1L8O3QUI

252166

3261

DTXSID0026129

2920909090

Characteristics

36.9

9.98

Tetraphenoxysilane appears as white powder or light pink chunky solid. (NTP, 1992)

1.1328 g/cm3 @ Temp: 70 °C

49 °C

417 °C

greater than 230° F (NTP, 1992)

1.5539

less than 1 mg/mL at 68.9° F (NTP, 1992)

0.975 mm Hg (NTP, 1992)

greater than 1 (NTP, 1992) (Relative to Air)

Insoluble in water.

Siloxanes

TETRAPHENOXYSILANE is incompatible with strong oxidizers and mineral acids. (NTP, 1992).

Safety Information

UN32618/PG3

34

26-36/37/39-45

C

P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, P501

H314

This chemical is probably combustible. (NTP, 1992)

|Danger|H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 38 companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

SYMPTOMS: Symptoms of exposure to this compound may include irritation of the skin and eyes. ACUTE/CHRONIC HAZARDS: This compound may irritate the skin and eyes. When heated to decomposition it emits irritating fumes, toxic fumes of silicon oxide and carbon dioxide and traces of incompletely burned carbon products. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Tetraphenoxysilane Use and Manufacturing

Silicic acid (H4SiO4), tetraphenyl ester: ACTIVE

Computed Properties

Molecular Weight:400.5
Hydrogen Bond Acceptor Count:4
Rotatable Bond Count:8
Exact Mass:400.11308565
Monoisotopic Mass:400.11308565
Topological Polar Surface Area:36.9
Heavy Atom Count:29
Complexity:364
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Tetraphenoxysilane

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.