Waterborne epoxy primer 70%

Waterborne epoxy primers are composed of waterborne epoxy resin, corrosion resistant, wear-resistant pigments and fillers, additives, waterborne amine curing agents and negative ions. The film has the glossy surface of ceramic tiles, and the film formed is hard, wear-resistant and rich in color, and the corrosion of chemical products such as water resistance, oil resistance, acid and alkali salt, etc. The industry used for concrete structure waterproof anti-corrosion cooling tower wall, water tower, water tank, reservoirs, tunnels, water tank, sewage treatment pool, underwater structures not wet and dry; building used for flooring, Osaka, balcony, basement, bathroom, garage and wooden slats, metal anticorrosion and decoration.

Product parameters:

Appearance: iron red, light color, half light

Density: about 1.05

Coating methods: brush, roll, and spray

Diluent: negative ion water (or clean tap water)

Coating interval: 23± 2 C: the shortest 6 hours, the longest 7 days

Film thickness: dry film: 50 microns

Drying time: 2 23± C: dry within 4 hours, work less than 36 hours, completely cured for 7 days

Storage period: 6 months

After the detection process 14 Jian Bang coating process:

1) the inspection of raw materials for purchasing 2) the supervision and verification of the weight dispatched quality inspectors

3) after the end of the feeding, the sand grinding is carried out with 1200 rotating / divided 20 minutes for 20 minutes.) the sand mill begins to measure the fineness of the first time after 20 minutes.

5) if the fineness is not reached, the deceleration is 6) and then the fineness will be measured after 20 minutes until the product standard is met.

7) color color difference control &Delta = ± 38); sticky primer 100± 10 seconds, 10 seconds to finish 80±

9) jet plate observation table stem 10) more than 1 work measuring adhesion level

11) the impact of more than 50cm.g12) bending 1-2mm

13) bottom / medium / surface matching

14) weatherability and salt tolerance are usually made according to the characteristics of the products and the requirements of the customers.

Service partner Chinese Jian Bang paint, oil, petrochemical, nuclear power Chinese Navy General Equipment Department, Shanghai construction group, Indonesia, Indonesia Jiangsu Hehai group Dongfeng well-off, Indonesia Indonesia GM Wuling, Baosteel Group, Shenhua Guohua Power Plant, power plant, Yangzhou Taizhou airport, Qingdao port authority, Luoyang Beijing petrochemical, Yanshan Petrochemical Wei bridge group, Chinese thirteen chemical engineering construction, the cooperative team of Jian Bang paint Beijing University of Chemical Technology, University of New South Wales in Australia, a strong R & D team, to solve your problem demanding complex anti-corrosion coating environment and construction problems, just want to become a strong technical backing around you.

Matters needing attention：

If the coating is splashed into the eyes, rinse with water immediately, and ask the doctor to treat the excessive inhalation of the solvent gas immediately to the fresh air where the collar is loosened.

Gradually restore the skin to the paint and use soap and clean water to rinse or use appropriate industrial cleaners

The construction site should have good ventilation conditions to prevent the inhalation of solvent gas and spray paint when spraying.