Epoxy thick plasma anti-corrosion paint

Product composition:

Various kinds of epoxy thick - paste anticorrosive coating are made from epoxy resin, anti-corrosive materials, dispersants, mixed solvents and polyamide curing agents.

Product features:

Various kinds of epoxy thick - paste anticorrosive coating have high corrosion resistance, good chemical stability, excellent alkali resistance, salt water resistance, moisture resistance, oil resistance and aging resistance. The weatherability is slightly worse, the surface will be slightly pulverized after being exposed to the outdoors for a long time, which will affect the appearance, but it has little effect on the protection of corrosion protection.

Product use:

Various kinds of epoxy thick - paste anticorrosive finish paint for indoor or concealed engineering steel structure heavy anticorrosive finish.

Instructions:

Coating method: high pressure airless spray, hand brush, roller coating

Front road coating: epoxy zinc rich primer, epoxy cloud iron anti-rust paint, epoxy glass scale anti-rust paint

Coating interval:

48 hours 10 ℃, the shortest, the longest 14 days; 25 ℃, the shortest 24 hours, the longest 7 days; 30 ℃ : minimum 12 hours, up to five days

Technical indicators:

Appearance: colorful, light

Proportion: part a (paint) : part b (curing agent) = 18:3 ~ 5

Thinner: X-7 epoxy paint thinner

Shelf life: 23 + 2 ℃ : 8 hours

Flash: component: 27 ℃; Component b: 27 ℃

Density: h52-60: about 1.32; H52-61:1.55

Maturation period: 23 + 2 ℃ : 0.5 ~ 1 hour

Drying time: 23 + 2 ℃, table 4 hours, work 24 hours a day, seven days completely curing

Coating thickness: h52-60 wet film: 100 micron; Dry film: 55 micron h52-61 wet film: 190 micron; Dry film: 100 microns

Theoretical dosage: h52-60:200g/m2; H52-61:260g/m2

Packing specifications:

Iron drum. Group a: 20L18, 20kg, group b: 5l4.5kg18. 5L12 ~ 15kg (with the proportion of the weight to the part of the group when used)

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 12 months. After that, it should be checked and used.

Notes:

If the paint is splashed into your eyes, rinse immediately with water and ask for medical treatment. If skin is stained with paint, apply soap and water to wash or use appropriate industrial cleaning agent, it is best not to use a large amount of solvent or thinner.

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.