Ethyltrichlorosilane 99% see COA kanbei
GMP ISO
115-21-9
Industrial Grade
99%
qingdao
kanbei
25kg drum
2022-07-18
PVC resin,pvc paste resin,melamine
-
Product Description
-
Seller Information
-
DescriptionCertificatesBasic Info
-
Product Name:
Ethyltrichlorosilane
Other Name:Silane,trichloroethyl-;Trichloroethylsilane;Ethyl silicon trichloride;Ethyltrichlorosilane;Trichloroethylsilicon;TSL 8226;LS 120;LS 120 (silane derivative);SIE 4901.0
CAS No.:115-21-9
Molecular Formula:C2H5Cl3Si
InChIKeys:InChIKey=ZOYFEXPFPVDYIS-UHFFFAOYSA-N
Molecular Weight:163.51
Exact Mass:163.51
EC Number:204-072-6
UNII:6Q81CH0W5Z
UN Number:1196
DSSTox ID:DTXSID7026940
Color/Form:Liquid|COLORLESS LIQUID
HScode:2931 90 00
Categories:
Characteristics-
PSA:
0
XLogP3:4.72
Appearance:colorless liquid
Density:1.2381 g/cm3 @ Temp: 20 °C
Melting Point:-105.6 °C
Boiling Point:97.9 °C @ Press: 760 Torr
Flash Point:57 °F
Refractive Index:n 20/D 1.425(lit.)
Water Solubility:SOL IN BENZENE, ETHER, HEPTANE, PERCHLOROETHYLENE
Storage Conditions:Store below +30°C.
Vapor Pressure:36 hPa (20 °C)
Vapor Density:5.6 (Air = 1)
Toxicity:Oral-Rat LD50: 1330 mg/kg; Inhalation-Rat: 500 PPM/ 4 hours
Flammability characteristics:It is flammable in case of open flame, high temperature and oxidant; high temperature decomposes toxic phosgene; emits poisonous mist of chloride in water
Explosive limit:2.68%(V)
Experimental Properties:READILY HYDROLYZED WITH LIBERATION OF HYDROGEN CHLORIDE|Decomposes in water and alcohol|The reaction of organosilanes with halogens and halogen cmpd usually proceeds in good yield through cleavage of the Si--H bond and formation of the silicon-halogen bond. Reaction with fluorine, however, does not proceed satisfactorily because of cleavage of not only the Si--H but also C--Si and C--H bonds. Direct halogenation with chlorination, bromine, and iodine proceeds smoothly, however. /Organosilanes/
Air and Water Reactions:Highly flammable. Reacts violently with water, steam, moist air, alcohols, acetone, light metals with generation of heat and combustible (H2) and corrosive (HCl) gases. On contact with moist air it gives off HCl gas. [Handling Chemicals Safely 1980. p. 924]. It is readily hydrolyzed with the liberation of hydrogen chloride [Hawleys]. Ethyltrichlorosilane reacts vigorously with water to generate gaseous HCl. Based on a scenario where the chemical is spilled into an excess of water (at least 5 fold excess of water), half of the maximum theoretical yield of Hydrogen Chloride gas will be created in 0.45 minutes. After mixing particular chemicals into water, there may be a delay of <1-10 minutes before gas generation may be observed. For this chemical, a 5 second induction time was observed. Experimental details are in the following: "Development of the Table of Initial Isolation and Protective Distances for the 2008 Emergency Response Guidebook", ANL/DIS-09-2, D.F. Brown, H.M. Hartmann, W.A. Freeman, and W.D. Haney, Argonne National Laboratory, Argonne, Illinois, June 2009.
Reactive Group:Chlorosilanes
Reactivity Alerts:Highly Flammable
Reactivity Profile:Chlorosilanes, such as ETHYLTRICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.
Corrosivity:Corrosive
Heat of Vaporization:9,457.8 gcal/gmol
Critical Temperature & Pressure:Critical temperature: 286.8 °C; Critical Pressure: 32.9 atm
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 2
Acute toxicity - Category 4, Oral
Skin corrosion, Sub-category 1A
Acute toxicity - Category 3, Inhalation
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H225 Highly flammable liquid and vapour
H302 Harmful if swallowed
H314 Causes severe skin burns and eye damage
H331 Toxic if inhaled
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
PVC resin,pvc paste resin,melamine
-
Location:
Room 405, Unit 2, Building 1, Taiji Mansion, No. 38, Nanyang Road, Jinshui District, Zhengzhou City, Henan Province
-
Payment Terms:
TT against copy of documents,L/C
-
Average lead Time:
90
-
Total Annual Revenue:
$5 million-$10 million
-
Total Employees:
11-50
-
Year of Establishment:
2022
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product