Product
Supplier
Encyclopedia
Inquiry
Home > Organic Chemistry > Amides > Methylcyclohexane for Sale > Methylcyclohexane 108-87-2
Methylcyclohexane    108-87-2 buy - large image1
Methylcyclohexane    108-87-2 buy - image1

Methylcyclohexane 108-87-2

12 Inquiries

Unit Price: Get Latest Price
CAS No.:

108-87-2

Packaging:

drum

Price valid (until):

2023-03-22

Company Type:
Manufactory
Location:
China
Qualification:
Main Products:

Agrochemicals,Daily Chemicals,Catalysts & Chemical Auxiliary Agents,Extract,Inorganic Chemicals,Organic Intermediate

  • Product Description

  • Seller Information

  • Inquiry History

  • Description


      Product Detail  


    Chemical PropertiesMethylcyclohexane, an alkene, is a colorless liquid with a faint benzene-like odor. The odor threshold is 630 ppm (this is above the OEL).
    Physical propertiesClear colorless, very flammable liquid with a faint odor similar to benzene or cyclohexane. An odor threshold concentration of 150 ppbv was reported by Nagata and Takeuchi (1990).
    UsesSolvent; starting material in the synthesis of toluene.
    UsesMethylcyclohexane is an environmentally friendly coating, mainly used as solvent for ink, rubber, paint, varnish, oil and grease extraction solvent, chromatographic analysis standard substance, also can be used in organic synthesis and analytical reagents.
    UsesMethylcyclohexane is used as a solvent and reagent in organic synthesis and polymer chemistry. It is a component of jet fuel and also used as correction fluid in certain consumer products. It acts as a starting material for toluene synthesis
    Production MethodsMethylcyclohexane is separated by distillation from crude petroleum oils, and also produced by hydrogenation of toluene, reaction of benzene with methane, or acidic hydrocracking of polycyclic aromatics.
    Synthesis Reference(s)Journal of the American Chemical Society, 77, p. 5099, 1955 DOI: 10.1021/ja01624a044
    The Journal of Organic Chemistry, 41, p. 1393, 1976 DOI: 10.1021/jo00870a022
    General DescriptionA clear colorless liquid with a petroleum-like odor. Flash point 25°F. Less dense than water and insoluble in water. Vapors heavier than air.
    Air & Water ReactionsHighly flammable. Insoluble in water.

    Basic Info
    Product Name:

    Methylcyclohexane

    Other Name:

    Cyclohexane,methyl-;Methylcyclohexane;Cyclohexylmethane;Hexahydrotoluene;Toluene hexahydride;1-Methylcyclohexane;MCHX;NSC 9391;Swaclean MCH

    CAS No.:

    108-87-2

    Molecular Formula:

    C7H14

    InChIKeys:

    InChIKey=UAEPNZWRGJTJPN-UHFFFAOYSA-N

    Molecular Weight:

    98.19

    Exact Mass:

    98.19

    BRN:

    505972

    EC Number:

    203-624-3

    UNII:

    H5WXT3SV31

    ICSC Number:

    0923

    NSC Number:

    9391

    UN Number:

    2296

    DSSTox ID:

    DTXSID0047749

    Color/Form:

    COLORLESS LIQUID|Colorless liquid.

    HScode:

    2902199090

    Categories:

    Amides

    Characteristics
    PSA:

    0

    XLogP3:

    3.61

    Appearance:

    Colorless Liquid

    Density:

    0.7694 g/cm3 @ Temp: 20 °C

    Melting Point:

    -126.6 °C

    Boiling Point:

    100.9 °C @ Press: 760 Torr

    Flash Point:

    25 °F

    Refractive Index:

    1.426

    Water Solubility:

    H2O: 0.1 g/L (20 ºC)

    Storage Conditions:

    Flammables area

    Vapor Pressure:

    37 mm Hg ( 20 °C)

    Vapor Density:

    3.4 (vs air)

    Toxicity:

    Oral-rat LD50:> 3200 mg/kg; Oral-Mouse LD50: 2250 mg/m3/24 hours

    Flammability characteristics:

    Inflammable in case of open flame, high temperature, oxidant; burning produces irritating smoke

    Explosive limit:

    1.1-6.7%(V)

    Odor:

    Faint, benzene-like odor.

    OH:

    1.04e-11 cm3/molecule*sec

    Henrys Law Constant:

    0.43 atm-m3/mole

    Experimental Properties:

    SPECIFIC DISPERSION 97.8|Enthalpy of fusion: 16.43 cal/g|Ionization Potential, 9.85 eV|Henry's Law Constant = 0.43 atm m3/mol @ 25 °C

    Air and Water Reactions:

    Highly flammable. Insoluble in water.

    Reactive Group:

    Hydrocarbons, Aliphatic Saturated

    Reactivity Alerts:

    Highly Flammable

    Reactivity Profile:

    Saturated aliphatic hydrocarbons, such as METHYLCYCLOHEXANE, may be incompatible with strong oxidizing agents like nitric acid. Charring of the hydrocarbon may occur followed by ignition of unreacted hydrocarbon and other nearby combustibles. In other settings, aliphatic saturated hydrocarbons are mostly unreactive. They are not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents.

    Autoignition Temperature:

    482 °F (USCG, 1999)|482 °F (250 °C)|258 °C

    Heat of Combustion:

    4565.3 kJ/mol at 25 °C (liquid)

    Ionization Potential:

    9.85 eV

    Flammable Limits:

    Lower 1.2%; Upper 6.7%|Class IB Flammable Liquid: Fl.P. below 73°F and BP at or above 100°F.

    Physical Dangers:

    The vapour is heavier than air and may travel along the ground; distant ignition possible. As a result of flow, agitation, etc., electrostatic charges can be generated.

    Heat of Vaporization:

    31.27 kJ/mol at boiling pt; 35.36 kJ/mol at 25 °C

    Critical Temperature & Pressure:

    Critical temp: 572.2 K; Critical pressure: 3.471 MPa

    Hazard Identification

    Classification of the substance or mixture

    Flammable liquids, Category 2

    Skin irritation, Category 2

    Aspiration hazard, Category 1

    Specific target organ toxicity – single exposure, Category 3

    Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2

    GHS label elements, including precautionary statements

    Pictogram(s)
    Signal word

    Danger

    Hazard statement(s)

    H225 Highly flammable liquid and vapour

    H315 Causes skin irritation

    H304 May be fatal if swallowed and enters airways

    H336 May cause drowsiness or dizziness

    H411 Toxic to aquatic life with long lasting effects

    Precautionary statement(s)
    Prevention

    P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

    P233 Keep container tightly closed.

    P240 Ground and bond container and receiving equipment.

    P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.

    P242 Use non-sparking tools.

    P243 Take action to prevent static discharges.

    P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...

    P264 Wash ... thoroughly after handling.

    P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

    P271 Use only outdoors or in a well-ventilated area.

    P273 Avoid release to the environment.

    Response

    P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].

    P370+P378 In case of fire: Use ... to extinguish.

    P302+P352 IF ON SKIN: Wash with plenty of water/...

    P321 Specific treatment (see ... on this label).

    P332+P317 If skin irritation occurs: Get medical help.

    P362+P364 Take off contaminated clothing and wash it before reuse.

    P301+P316 IF SWALLOWED: Get emergency medical help immediately.

    P331 Do NOT induce vomiting.

    P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

    P319 Get medical help if you feel unwell.

    P391 Collect spillage.

    Storage

    P403+P235 Store in a well-ventilated place. Keep cool.

    P405 Store locked up.

    P403+P233 Store in a well-ventilated place. Keep container tightly closed.

    Disposal

    P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

    Other hazards which do not result in classification

    no data available

    Handling and Storage

    Precautions for safe handling

    NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Prevent build-up of electrostatic charges (e.g., by grounding). Do NOT use compressed air for filling, discharging, or handling. Use non-sparking handtools. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

    Conditions for safe storage, including any incompatibilities

    Fireproof. Separated from strong oxidants.Storage rooms should be bunded to prevent the spread of escaping liquid & electrical installations should be of flameproof type.

  • Seller Information
    Business Type:

    Manufactory

    Main Products:

    Agrochemicals,Daily Chemicals,Catalysts & Chemical Auxiliary Agents,Extract,Inorganic Chemicals,Organic Intermediate

    Location:

    hisense intelligence valley,no 2116,of phoenix road

    Payment Terms:

    TT against copy of documents,D/P,L/C

    Average lead Time:

    7

    Total Annual Revenue:

    Less than $1 million

    Total Employees:

    11-50

    Year of Establishment:

    2017

     SHANDONG LOOK CHEMICAL CO.LTD, a new chemical enterprise in researching, manufacturing and supplying of chemicals located in beautiful “Spring City”-Jinan.Our company mainly working on the researching new-born APIs, intermediate ( especially Carbohydrate derivatives series). Meanwhile, we made huge breakthrough in industries of food, feed additives, cosmetics ,dye and industrial chemicals. Our company enjoyed great reputation both domestic and abroad under the belief of “Integrity management,Quality controlling and Customer orientation”.  Web : www.chinalookchemical.com 

        We had been cooperated with NingXia University and Shandong University on more than ten projects for years and which had been in mass production on the market. We now have more than 80 people in our team and built research center in Jinan and Ningxia. Our manufacturing site allocated in chemical industry parks of Zhangqiu, Heze, Dezhou and Ningxia Fine Chemical Park. We strictly complying with ISO9001 and ISO 2000 standard in manufacturing process, our lab and workshop tightly in accordance with GMP standard.Our products best selling in Europe, South and North America,Asia pacific area and Africa. We sincerely welcome new and regular customers around the world visit us for business negotiation.

  • Inquiry History
    12 Inquiries
    Country Product Purchase Quantity Date Posted
    India

    Methylcyclohexane CAS 108-87-2

    15 MT Jun 29, 2023
    Vietnam

    Methylcyclohexane CAS 108-87-2

    20 MT Nov 20, 2023
    Vietnam

    Methyl Cyclohexane MCH (C7 H14)

    1 20' Fcl Dec 27, 2023
    India

    Methylcyclohexane

    18 MT Mar 22, 2025
    Vietnam

    Methyl Cyclohexane (MCH)

    1 20' Fcl Jun 29, 2023
    Thailand

    Methylcyclohexane 99.5%wt

    160000 MT Nov 14, 2025
    Malaysia

    Methylcyclohexane 99%

    1 MT Apr 14, 2024
    South Korea

    Methylcyclohexane

    36 MT Feb 13, 2024
    Vietnam

    Methyl Cyclohexane

    1.00 MT Jan 8, 2026
    India

    Methylcyclohexane

    1 20' Fcl Jan 3, 2024
    Malaysia

    Methylcyclohexane

    0.1 L Oct 30, 2023
    Malaysia

    Methylcyclohexane 99.5% Industrial Grade colourless liquid

    16 MT Oct 17, 2023
    Post an enquiry for this product
pic ×

Scan the QR Code to Share

All products displayed on this website are only for non-medical purposes such as industrial applications or scientific research, and cannot be used for clinical diagnosis or treatment of humans or animals. They are not medicinal or edible.

According to relevant laws and regulations and the regulations of this website, units or individuals who purchase hazardous materials should obtain valid qualifications and qualification conditions.

The information shown above is provided by the enterprise itself, and the authenticity, accuracy and legitimacy of the content are the responsibility of the publishing company. ECHEMI does not bear any guarantee responsibility for this. Please be aware that risks in internet transactions objectively exist.

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.