4-Methyl-2-pentyl Acetate
ISO
108-84-9
Industrial Grade
99%
barrel
2023-12-31
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202656 visits to its shop, is a reputable Manufactory that has been providing 4-Methyl-2-pentyl Acetate products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
4-Methyl-2-pentyl acetate
Other Name:2-Pentanol,4-methyl-,2-acetate;2-Pentanol,4-methyl-,acetate;MAAc;Methylisobutylcarbinol acetate;4-Methyl-2-pentyl acetate;1,3-Dimethylbutyl acetate;4-Methylpent-2-yl ethanoate;Acetic acid 1,3-dimethylbutyl ester;4-Methyl-2-pentanol acetate;NSC 567;155749-22-7
CAS No.:108-84-9
Molecular Formula:C8H16O2
InChIKeys:InChIKey=CPIVYSAVIPTCCX-UHFFFAOYSA-N
Molecular Weight:144.21100
Exact Mass:144.21
EC Number:203-621-7
ICSC Number:1335
NSC Number:567
UN Number:1233
DSSTox ID:DTXSID6051562
Color/Form:Colorless liquid.
HScode:2915390090
Categories:
Characteristics-
PSA:
26.30000
XLogP3:1.98410
Appearance:Methylamyl acetate appears as a clear colorless liquid. Flash point 95°F. Less dense than water and insoluble in water. Vapors heavier than air.
Density:0.8805 g/cm3 @ Temp: 25 °C
Melting Point:-64 °C
Boiling Point:147.5 °C
Flash Point:45°C
Refractive Index:1.411
Water Solubility:0.08%
Storage Conditions:Store in a cool place, away from sources of ignition.
Vapor Pressure:3 mmHg
Vapor Density:Relative vapour density (air = 1): 5.0
Flammability characteristics:Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.
Explosive limit:Explosive limits , vol% in air: 0.9-5.7
Odor:Mild, pleasant, fruity odor.
Experimental Properties:1 PPM= 5.89 MG/CU M
Air and Water Reactions:Highly flammable. Insoluble in water.
Reactive Group:Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Reactivity Alerts:Highly Flammable
Reactivity Profile:METHYLAMYL ACETATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. This compound is incompatible with the following: Nitrates; strong oxidizers, alkalis & acids (NIOSH, 2016).
Autoignition Temperature:510 °F (USCG, 1999)|510 °F (CALCULATED)
Heat of Combustion:-14,400 BTU/LB= -8,000 CAL/G= -335 X 10+5 J/KG
Flammable Limits:Flammable Limits in Air: 0.9%-5.7% (calculated)|Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.
Heat of Vaporization:225 BTU/LB= 125 CAL/G= 5.23X10+5 J/KG
Critical Temperature & Pressure:606 °F= 319 °C= 592 DEG K, 382 PSIA= 26 ATM= 2.6 MN/SQ M
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Above 45°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants.Store in a cool place, away from sources of ignition.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product