2,3-dimethylphenol
ISO
526-75-0
Industrial Grade
99%
bag
2023-12-31
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202377 visits to its shop, is a reputable Manufactory that has been providing 2,3-dimethylphenol products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
2,3-Dimethylphenol
Other Name:Phenol,2,3-dimethyl-;2,3-Xylenol;2,3-Dimethylphenol;o-Xylenol;1-Hydroxy-2,3-dimethylbenzene;1,2-Dimethyl-3-hydroxybenzene;NSC 62011;2,3-DMP
CAS No.:526-75-0
Molecular Formula:C8H10O
InChIKeys:InChIKey=QWBBPBRQALCEIZ-UHFFFAOYSA-N
Molecular Weight:122.164
Exact Mass:122.16
EC Number:208-395-3
UNII:RLF9YS3586
ICSC Number:0601
NSC Number:62011
UN Number:2261
DSSTox ID:DTXSID6025143|DTXSID8027375
Color/Form:Needles from water or dilute alcohol
HScode:29071990
Categories:
Characteristics-
PSA:
20.23000
XLogP3:2.40
Appearance:2,3-dimethylphenol appears as colorless crystalline solid or brown chunky solid. Taste threshold concentration 0.03 mg/L. Odor threshold concentration 0.5 mg/L. (NTP, 1992)
Density:1.0±0.1 g/cm3
Melting Point:72.8 °C
Boiling Point:218 °C
Flash Point:90.7±7.2 °C
Refractive Index:1.540
Water Solubility:slightly soluble
Vapor Pressure:0.089 mm Hg @ 25 deg C
Vapor Density:Relative vapour density (air = 1): 4.2
Explosive limit:Explosive limits , vol% in air: 1.4-?
Taste:0.03 mg/l (taste threshold concn)
OH:8.02e-11 cm3/molecule*sec
Henrys Law Constant:7.38e-07 atm-m3/mole
Dissociation Constants:pKa= 10.54 at 25 °C
Experimental Properties:Heat of fusion: 41.13 cal/g= 172.09 J/g= 21,024 J/mol|Hydroxyl radical rate constant = 8.02X10-11 cu-cm/molc sec @ 25 °C
Air and Water Reactions:Hygroscopic. Insoluble in water.
Reactive Group:Phenols and Cresols
Reactivity Profile:Solutions of 2,3-DIMETHYLPHENOL in water, DMSO, 95% ethanol or acetone should be stable for 24 hours under normal lab conditions. This compound is incompatible with bases, acid chlorides, acid anhydrides, and oxidizing agents. It corrodes steel, brass, copper, and copper alloys. (NTP, 1992)
Autoignition Temperature:599 °C
Physical Dangers:Dust explosion possible if in powder or granular form, mixed with air.
Heat of Vaporization:13,106.8 g cal/g mole
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 3, Oral
Acute toxicity - Category 3, Dermal
Skin corrosion, Sub-category 1B
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Danger
Hazard statement(s) H301 Toxic if swallowed
H311 Toxic in contact with skin
H314 Causes severe skin burns and eye damage
H411 Toxic to aquatic life with long lasting effects
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
Response P301+P316 IF SWALLOWED: Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P316 Get emergency medical help immediately.
P361+P364 Take off immediately all contaminated clothing and wash it before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P391 Collect spillage.
Storage P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from food and feedstuffs, acid anhydrides, acid chlorides, bases and oxidants.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product