Allyl ether
ISO
557-40-4
Industrial Grade
99%
200kg/drum
2023-06-30
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202628 visits to its shop, is a reputable Manufactory that has been providing Allyl ether products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Allyl ether
Other Name:1-Propene,3,3′-oxybis-;Allyl ether;3,3′-Oxybis[1-propene];Diallyl ether;4-Oxahepta-1,6-diene;3-(Allyloxy)-1-propene;Bis(allyl) ether;3,3′-Oxybis-1-propene;NSC 7619;3-(2-Propenoxy)-1-propene
CAS No.:557-40-4
Molecular Formula:C6H10O
InChIKeys:InChIKey=ATVJXMYDOSMEPO-UHFFFAOYSA-N
Molecular Weight:98.14
Exact Mass:98.14
EC Number:209-174-4
UNII:GI3WXY29NQ
ICSC Number:1071
NSC Number:7619
UN Number:2360
DSSTox ID:DTXSID8060321
Categories:
Characteristics-
PSA:
9.2
XLogP3:0.7 (calculated)
Appearance:Diallyl ether appears as a liquid with an odor of radishes. Less dense than water. May be toxic by ingestion, skin absorption, and inhalation, and may irritate skin and eyes. Vapors heavier than air. Used to make other chemicals.
Density:0.8449 g/cm3 @ Temp: 0 °C
Melting Point:-6 °C
Boiling Point:94 °C
Flash Point:-7 °C
Refractive Index:1.415-1.417
Water Solubility:H2O: insoluble
Storage Conditions:Refrigerator (+4°C) + Flammables area
Vapor Pressure:Vapour pressure, kPa at 20°C: 5.79
Vapor Density:Relative vapour density (air = 1): 3.4
Toxicity:Oral-Rat LD50: 320 mg/kg; Abdominal cavity-mouse LDL0: 250 mg/kg
Flammability characteristics:Inflammable in case of open flame, high temperature, oxidant; high thermal decomposition stimulating gas
Air and Water Reactions:Highly flammable. Soluble in water. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154].
Reactive Group:Ethers
Reactivity Alerts:Highly Flammable
Reactivity Profile:Ethers, such as DIALLYLETHER can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Peroxide Forming Chemical:Diallyl ether|D: Other compounds that may form peroxides|Kelly|An explosion occured during a distillation. The starting ether had been improperly stored before the distillation attempt and peroxides had built up. See Bretherick's.
Physical Dangers:The vapour is heavier than air and may travel along the ground; distant ignition possible. As a result of flow, agitation, etc., electrostatic charges can be generated.
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 2
Acute toxicity - Category 4, Oral
Acute toxicity - Category 3, Dermal
Skin irritation, Category 2
Eye irritation, Category 2
Acute toxicity - Category 4, Inhalation
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H225 Highly flammable liquid and vapour
H302 Harmful if swallowed
H311 Toxic in contact with skin
H315 Causes skin irritation
H319 Causes serious eye irritation
H332 Harmful if inhaled
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P361+P364 Take off immediately all contaminated clothing and wash it before reuse.
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P317 Get medical help.
P319 Get medical help if you feel unwell.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Do NOT use compressed air for filling, discharging, or handling. Use non-sparking handtools. Prevent build-up of electrostatic charges (e.g., by grounding). Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from acids and oxidants. See Chemical Dangers. Store only if stabilized. Cool. Keep in the dark.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
