Denim Fabric use/ Enzyme/Natural Cellulase/ B6105

Enzyme Sylic B6105

DESCRIPTION

Enzyme Sylic B6105 is a high concentrated neutral base granule product intended for incorporation in stone washing reformulations as a base ingredient in the laundry. It has high performance for the new shades and finishes to be created easily and cost-effectively, in an environmental-friendly way under the neutral conditions in the laundry.

Enzyme Sylic B6105 is recommended for the following advantage in the finishing for the denim in the laundry.

• High color contrast finish

• Low degree of indigo back-staining

• Optimal strength retention

• High degree of reproducibility and reliability

• Maximizing fabric strength retention

• Improved wash look, or create new looks

• Easy and cost effective reformulation

TECHNICAL SPECIFICATIONS

l Appearance: granule

l Odor: Slight fermentation odor

Effect of pH and Temp. on the activity of Enzyme Sylic B6105

The optimal pH and Temperature ranges for Enzyme Sylic B6105 are pH 5.5-7.5

and 45-60°C to optimize its performance and anti-back staining properties. The broad pH and Temperature range result in a flexible and easy to-use product, which has low requirements for buffer salts and dispersing agents.

SCOPE OF APPLICATION

Enzyme Sylic B6105 is suitable for DIRECT USE OR reformulations in the laundry. The following reformulation recipe is a basic recipe for your reference and you could adjust the base enzyme and the buffer system according to the finishing effect and local environment requirements

A typical reformulation is based on the following general formula, targeting an end-use dosage between 0.5-2% o.w.g.:

4 - 8% Enzyme Sylic B6105

50-55% Buffer Salts

0-20% Surfactants

0-30% Soluble fillers, e.g. sodium sulphate

0-5% Conditioner, e.g. starch and silicates

A phosphate or phosphate/citrate buffer is particularly suitable for the pH range in requirement in 6-7.5. However, a combination of citric acid and adipic acid (6% and 50% respectively) can be used as a non-phosphate alternative.

The suggested buffer systems should be used as a starting point; additional adjustment to meet local conditions may be necessary (see recipes).

Enzyme Sylic B6105 is compatible with most nonionic surfactants. Anionic surfactants should be avoided. In particular, alcohol ethoxylates are widely used in denim finishing. Most surfactants of interest are liquids or pastes at room temperature. However, it is possible to include a liquid surfactant in a solid formulation by spraying the surfactant onto a carrier material such as kaolin, silicate or starch.

The formulation should be thoroughly mixed to ensure homogeneity. Auxiliary compatibility with Enzyme Sylic B6105 should be determined by conducting performance and enzyme stability evaluations.

Recommended Recipes

The following recipes are intended as a starting point for further formulation work. Optimization to meet local conditions will be needed. The targeted product finish requires a dose between 0.5-3% of the final formulation, depending on desired shade, fabric quality and size of machinery.

Three different strategies for adding surfactants into the formulation are:

1. Adding a surfactant exhibiting both dispersing and wetting action, typical of surfactants with HLB between 11-14.

2. Adding a wetting (HLB 9-11) and a dispersing agent (HLB >14) separately. This formulation will impart excellent abrasion boost and reduce back staining.

3. Adding a dispersing agent (HLB >14). This formulation should be chosen if back staining is of high priority or if it is not possible to add a liquid surfactant.

Surfactants with HLB between 9-11 are typically liquids at room temperature and may be incorporated into a solid formulation by spraying the surfactant onto a carrier material such as kaolin, silicate or starch.

PACKAGING AND STORAGE

Standard packaging is 50kg bucket.

To ensure extend shelf life, store Enzyme Sylic B6105 at 25℃ or below in a sealed container. Exposure of this product to elevated temperatures for prolonged periods of time may result in loss of activity.

SECURITY STATEMENT

Good hygiene and industrial practices should be observed. Avoid inhalation, swallowing or contact with skin and eyes. For detailed safety information on this product, please refer to the MSDS for this product.

This product description is limited to our existing knowledge and experience, and does not provide a complete guarantee due to differences in use conditions, equipment, and geography, so users are advised to conduct prior tests to determine formulations and processes based on application conditions. We are not responsible for any discrepancies or any legal related responsibilities involved.