Bees wax

1. Product identification

Trade name: beeswax

English Name: beeswax

Manufacturer:EAST CHEMSOURCES LIMITED

Address: NO.666 Haibin 12^th Road, Huangdao, Qingdao,China

Tel: 86-0532-81906761

2. Component information

Pure product ■ mixture □

Content of main component c.a.s. (%)

Beeswax 8012-89-3

3. Risk overview

3.1 route of invasion: ingestion, skin, eyes, inhalation 3.2 health hazards:

Skin contact: slight skin irritation.

Eye contact: can cause eye irritation, discomfort.

Miseating: it can stimulate the intestines and stomach, causing nausea, vomiting and diarrhea.

Inhalation: slight irritation to respiratory tract.

3.3 environmental hazard: no hazard.

3.4 explosion hazard: combustible in case of open fire and high heat.

4. First aid measures

Eating by mistake: do not feed anything to the unconscious from the mouth. Do not induce vomiting. Consult a doctor.

Skin contact: wash with soap and plenty of water, consult your doctor.

In eye contact: rinse thoroughly with plenty of water for at least 15 minutes and consult a doctor.

Inhalation: leave the site to fresh air. If you have difficulty breathing, give oxygen and see a doctor.

5. Fire fighting measures

Fire fighting method: use water mist, alcohol resistant foam, dry powder or carbon dioxide to extinguish fire.

Precautions and measures for fire fighting: Firefighters must wear gas masks and full body fire fighting suits to put out the fire in the upwind direction. Move the container from the fire site to the open area as far as possible. Spray water to keep the containers cool until the fire is over.

6. Emergency measures for leakage

Personal precautions: use personal protective equipment to prevent inhalation of steam, mist or gas and ensure adequate ventilation. Environmental precautions: do not let the product enter the sewer.

Emergency treatment: isolate the leakage pollution area, restrict access, eliminate all ignition sources, it is recommended that emergency treatment personnel wear dust masks and general work clothes. Cut off the leakage source as much as possible.

7. Operation and storage

Precautions for safe operation: avoid contact with skin and eyes, prevent inhalation of steam and smoke, keep away from fire and heat source, and prohibit smoking in the workplace.

Safe storage conditions: store in a cool and ventilated warehouse. Keep away from fire and heat source. It should be stored separately from oxidant, reducing agent and alkali, and mixed storage should be avoided. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area should be equipped with suitable materials to contain the leakage.

8. Exposure control / personal protection

Occupational exposure limits in workplaces:

MAC (mg / M) 3: no standard

TLV-TWA (mg / M) 3: no data

Tlv-c (mg / M) 3: no standard

Pc-stel (mg / M) 3: no standard

Engineering control: the production process is closed, ventilation is strengthened, and safety shower and eyewash equipment are provided. Respiratory protection: wear air respirator when necessary.

Eye protection: wear proper protective glasses.

Body protection: wear appropriate protective clothing.

Hand protection: wear appropriate protective gloves.

Other protection: no smoking at work site, shower and change clothes after work, pay attention to personal hygiene.

9. Physical and chemical properties

Appearance and character: milky white block with wax smell.

Melting point (℃): 60-64

Acid value KOH (mg / g): 16-23

Saponification value KOH (mg / g): 75-110

Iodine value (Ig / 100g): 8-13

Moisture (%): ≤ 0.8

Solubility: insoluble in water.

10. Stability and reactivity

Stability: stable

Polymerization hazard: non polymerization

Taboo: strong oxide.

Combustion products: carbon oxides.

11. Toxicological information

Acute toxicity:

LD50 oral - mice - 46700 mg / kg

Skin corrosion / irritation:

Skin - Rabbit - mild skin irritation - 24 h severe eye injury / eye irritation:

Eyes - Rabbit - slight eye irritation

12. Ecological information

Toxicity: under careful handling and use, it will not cause ecological problems

Potential for bioaccumulation: no data available.

13. Waste disposal

Waste method: refer to relevant national and local laws and regulations before disposal, and use safe burial method if possible.

14. Transportation information

China is not dangerous goods

Packing method: inside and outside two-layer bags, 25kg / bag, according to the manufacturer.

Precautions for transportation: the package shall be complete during shipment, the loading shall be stable, and the container shall not leak, collapse, fall or damage during transportation. It is strictly forbidden to mix with reducing agent, chemicals, etc. during transportation, it is necessary to prevent sun exposure, rain and high temperature. After transportation, it is necessary to thoroughly clean the vehicle. During highway transportation, it is necessary to drive according to the specified route.

15. Regulatory information

Ministry of light industry of the people's Republic of China

Ministry of health: prohibited substances of cosmetic components (2007 Edition) none

State Environmental Protection Administration: national hazardous waste list (1998 edition) none

16. Other information

This MSDS provides information about the use of this product under normal conditions. It is only for safety reference. The conditions or methods for handling, storing, using or handling this product are not under our control and may be beyond our knowledge. As a result of these reasons, we are not liable for any loss, damage or expense arising from the handling, storage, use or disposal of the products.