Best Seller of 99% transparent liquid Butylamine CAS NO (109-73-9)
109-73-9
Industrial Grade
99%
Durban
Custom
As per customer requirement
2024-05-28
Sodium Lauryl Ether Sulfate,Caustic Soda,Soda Ash,Citric Acid,Calcium Hypochlorite,Oxalic Acid
-
Product Description
-
Seller Information
-
DescriptionBasic Info
-
Product Name:
Butylamine
Other Name:1-Butanamine;Butylamine;1-Aminobutane;Mono-n-butylamine;Norvalamine;n-Butylamine;Monobutylamine;1-Butylamine;NSC 8029;42939-72-0;50929-03-8;85404-21-3
CAS No.:109-73-9
Molecular Formula:C4H11N
InChIKeys:InChIKey=HQABUPZFAYXKJW-UHFFFAOYSA-N
Molecular Weight:73.14
Exact Mass:73.14
BRN:605269
EC Number:203-699-2
UNII:N2QV60B4WR
ICSC Number:0374
NSC Number:8029
UN Number:1125
DSSTox ID:DTXSID1021904
Color/Form:CLEAR, COLORLESS LIQUID
HScode:29211980
Categories:
Characteristics-
PSA:
26
XLogP3:0.86
Appearance:Clear Liquid
Density:0.7327 g/cm3 @ Temp: 25 °C
Melting Point:-50 °C
Boiling Point:78 °C
Flash Point:30 °F
Refractive Index:n 20/D 1.401(lit.)
Water Solubility:water: miscible
Storage Conditions:2-8°C
Vapor Pressure:68 mm Hg ( 20 °C)
Vapor Density:2.5 (vs air)
Toxicity:Oral-Rat LD50: 366 mg/kg; Oral-Mouse LD50: 430 mg/kg
Flammability characteristics:Inflammable in case of open flame, high temperature, oxidant; burning produces toxic nitrogen oxide fumes; corrosive
Explosive limit:1.5-9.8%(V)
Odor:Amine odor
PKA:10.8(at 20 °C)
Henrys Law Constant:1.74e-05 atm-m3/mole|Henry's Law constant = 1.74X10-5 atm cu-m/mol at 25 °C
Dissociation Constants:10.8 (at 20 °C)|pKa = 10.78 at 20 °C (conjugate acid)
Experimental Properties:1 MG/L IS EQUIVALENT TO 334 PPM; 1 PPM IS EQUIVALENT TO 2.99 MG/CU M|Surface tension 19.7 dynes/cm when in contact with nitrogen @ 41 °C.|Liquid butylamine will attack some forms of plastics, rubber, and coatings.|It weighs 6.2 lb/gal
Air and Water Reactions:Highly flammable. Dissolves in water with evolution of heat. The resulting solutions are basic.
Reactive Group:Amines, Phosphines, and Pyridines
Reactivity Alerts:Highly Flammable
Reactivity Profile:N-BUTYL AMINE reacts violently with strong oxidizing agents and acids. Attacks copper and copper compounds [Handling Chemicals Safely 1980 p. 123]. Reacts with hypochlorites to give N-chloroamines which may be explosive when isolated [Bretherick 1979 p. 108].
Autoignition Temperature:594 °F (USCG, 1999)|594 °F (312 °C)|312 °C
Heat of Combustion:-3018.4 kJ/mole (liquid) at 25 °C
Ionization Potential:8.71 eV
Flammable Limits:Lower flammable limit: 1.7% by volume; Upper flammable limit: 9.8% by volume|Class IB Flammable Liquid: Fl.P. below 73°F and BP at or above 100°F.
Physical Dangers:The vapour is heavier than air and may travel along the ground; distant ignition possible.
Corrosivity:It may corrode some metals in the presence of water.
Heat of Vaporization:35.72 kJ/mole at 25 °C
Critical Temperature & Pressure:CRITICAL TEMPERATURE: 484 °F = 251 °C = 524 DEG K; CRITICAL PRESSURE: 603 PSIA = 41 ATM = 4.16 MN/SQ M|Critical temperature: 531.9 K; critical pressure: 4.25 MPa
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 2
Acute toxicity - Category 4, Oral
Acute toxicity - Category 4, Dermal
Skin corrosion, Sub-category 1A
Acute toxicity - Category 4, Inhalation
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H225 Highly flammable liquid and vapour
H302 Harmful if swallowed
H312 Harmful in contact with skin
H314 Causes severe skin burns and eye damage
H332 Harmful if inhaled
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P317 Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from food and feedstuffs. See Chemical Dangers.Store in closed containers in a cool, dry, well-ventilated area.
-
-
Seller Information
-
Business Type:
Distributor
-
Main Products:
Sodium Lauryl Ether Sulfate,Caustic Soda,Soda Ash,Citric Acid,Calcium Hypochlorite,Oxalic Acid
-
Location:
13 PROTEA PARK MILKWOOD STREET RANGEVIEW GAUTENG 1739
-
Payment Terms:
TT against copy of documents,TT against B/L draft before shipment
-
Average lead Time:
60
-
Total Annual Revenue:
$1 million-$2.5 million
-
Total Employees:
11-50
-
Year of Establishment:
2012
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
