Sodium Polyacrylate & C13-14 Isoparaffin & Laureth-7

INCI name: 

Sodium Polyacrylate & C13-14 Isoparaffin & Laureth-7

CAS NO.:

9003-04-7
8012-95-1
3055-97-8
7732-18-5

General Information: 

JF415 is a liquid, ready-to-use rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment  and physical sunscreen. It is recommended to be used in skin cream, creamy gel, as single or union emulsifier. It can be used over a wide range of pH and makes it possible to obtain soft, supple and shining textures.

Specification:

* These values indicate typical specification; they are not intended to be used as product specifications.

Benefits:
⚫ Applicable to all kinds of oils such as vegetable oil, polar and nonpolar oil, without heating or other extra treatment.
⚫ Applicable to the formula which contains high content silicone.
⚫ Efficiently thicken the formula which contains polar solvent.
⚫ Particularly effective in wide pH range 5-10.
⚫ No influence on viscosity after long-time high speed shearing.
⚫ No influence on viscosity under UV radiation.
⚫ Good compatibility with active ingredients.

Application：
⚫ Cream, lotion, creamy gel
⚫ Make-up foundation and sunscreen cream
⚫ Formula containing polar solvent, alcohol and polyol
⚫ Formula containing silicone or AHA

Formula guidelines:

Cold process, Blend JF415 with oil phase. Add water phase into the oil phase, mix until uniform.  Hot process, Heat oil phase and water phase separately to 75-80℃. Add oil phase into water phase while mixing. Then add JF415 into the emulsion at 60℃. Homogenize moderately for 15-20 minutes.

Dosage:
Used solely: 2.0~5.0%. 
Used with other emulsifier: 0.2~2.0%

Storage & Handling：
Standard Packing: 30kg/35kg/drum
Storage: keep in cool, dry, ventilated and lightless place.