Pls inpu
Quality standards:
According to the German DIN D3 woodworking adhesive waterproof standard test:
Compliant with Japanese JAS standard testing:
Complies with California 65 hazardous substance testing in the United States;
Compliant with EU ROHS2.0 hazardous substance testing:
Complies with GB18583-2008 "Limit of Harmful Substances in Adhesives for Interior Decoration and Decoration Materials":
Complies with the relevant heavy metal content requirements of the European Union EN-71-3;
Complies with the national E0 level formaldehyde emission level;
Complies with EU E1 level formaldehyde emissions;
Characteristics of this application scenario: woodworking products/furniture manufacturing/handicraft manufacturing
Common woodworking techniques include hot pressing/cold pressing/splicing/assembly/veneer bonding/tenoning/tooth joint/high-frequency/wood edge sealing:
Excellent waterproof performance, resistant to moisture, freezing and thawing, and cracking:
High adhesive strength, durable and reliable, anti-aging:
After curing, the adhesive film is transparent and beautiful, with good toughness and impact resistance
Resistant to paint corrosion, without foaming and cracking:
45 ° ∠ Reliable assembly and bonding, resistant to impact:
Can be used for construction above 5 ℃, with excellent low temperature resistance and adhesion, suitable for most countries and regions around the world:
technical parameter
Note: The following data is tested at 20-25C
appearance
Milk white viscous and uniform liquid
Viscosity (25 ℃)
15000~35000mpa.s
Solid content
50%±2%
PH value
2.5~4.0
Minimum film-forming temperature
5℃
The above is laboratory data of 25 ℃ constant temperature and humidity, for reference only,
[ Validity ]: The original packaging is sealed for 12 months and stored at 10-30 ° C. Poor storage conditions may shorten the validity period.
[Identification]: This product is water safe and does not need to be labeled with a dangerous goods label:
[Spot packaging: 20KG/barrel] [Common specifications: 1100KG/ton, 50KG barrel];
[For other special packaging, 32 ounce, gallon barrels, and other customized items, please contact our company to confirm delivery time and packaging prices.]
Operation prompt: The opening and closing times of this product are related to the operating environment, such as temperature, relative humidity, material moisture content, and material moisture absorption
Factors such as energy, tension, and adhesive amount are related.
If the following conditions can be followed, excellent bonding effect can be achieved:
Temperature of operating site, material, and adhesive:
18-20℃
Wood moisture content:
8-10%
Relative humidity:
60-70%
Glue amount:
Veneer:
80-140g/m2
assemble:
160-180g/m2
Opening hours (adhesive amount: 150g/m2):
5-10 points
Pressure (depending on the bonding method):
0.1-0.8N/mm2
Minimum pressurization time:
Decorative stickers:
10-45 seconds
High frequency bonding:
20-90 seconds
Short cycle veneer:
60-180 seconds
Assembly and bonding:
30-120 minutes
Splicing or thickening:
45-180 minutes
Wood pre processing: The parts to be bonded must ensure processing accuracy and the bonded surface must be kept clean, without stains or dust. thickness
Inconsistency not only prolongs the pressurization time, but also leads to a decrease in bonding strength.
Gluing suggestion: Apply glue on one side, apply ZBL-808 thinly and evenly on the surface to be glued: if better water resistance is needed
Sex, it is recommended to use double-sided adhesive tape. This product can be coated with rollers, scrapers, brushes, or other adhesive tools. This adhesive has strong properties
The polarity and thixotropy of the product are prone to false thickening after prolonged use. Simply stir before use to restore the original viscosity.
Pressure: Assemble and maintain pressure within the specified opening time until sufficient initial bonding strength is achieved. Ensure sufficient
Sufficient pressure is applied to ensure that the two surfaces to be bonded are completely sealed together.
Wood discoloration: This product will not cause any discoloration of wood. However, rust can react with tannic acid in wood, especially
It is white oak, which produces dark stains.
Cleaning tools: Clean the adhesive tools with water before the adhesive dries and solidifies.
Useage:
Wooden furnitureMDF
Corner protector
Honeycomb paper
Packaging paper
paper
t...
