Manufacturer Supply best price Poly Aluminium Chloride Chemical Auxiliary Agent for Paper Chemicals

The Poly Aluminum Chloride products produced by Xinhuan Water Treatment have the advantages of fast flocculation and precipitation., wide range of applicable pH value, non corrosiveness to pipeline equipment, obvious water purification effect, and can effectively remove SS, COD, BOD, arsenic, mercury and other heavy metal ions in water.

It is suitable for the purification of domestic water and various sewage, especially for low temperature and low turbidity water.

Performance：

1. With the advantages of aluminum salt and iron salt coagulation, flocs can be formed rapidly, and the compactness ratio of flocs is large, and the sedimentation is rapid.
2. It is suitable for sewage at various temperatures and has good solubility.
3. Compared with other aluminum salt water purifying agents, the dosage is small and the cost is low.

Usage and precautions：

1. The product is added after being dissolved in water, and the dilution ratio is generally 2% - 20% (weight percentage).
2. The dosage of medicament is generally: 1-15g / T of solid products, and the specific dosage is determined by the user according to the actual experimental amount due to different water quality.
3. This product should not be mixed with other chemicals.

Usage and Precautions:

It is recommended that an aqueous solution be used at a concentration of 0.1% to 0.3% and preferably formulated with neutral and desalinated water.

The most economical dosage is determined by preliminary tests and the pH of the water to be treated is adjusted prior to treatment. During formulation, the polymer hydrogel should be dispersed uniformly in the agitated water to ensure adequate contact. Heating the water (below 60 degrees Celsius) can accelerate dissolution, which takes about 3-15 minutes. Due to the viscous nature of PAM, the work area should be rinsed frequently to keep it clean.