ANJEKA4410 Anti settling agent for PVC paste BYK410 replacement

ANJEKA--4410

DESCRIPTION

Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later.

PRODUCT DATA

Composition: Solution of modified polyurea. Typical Properties The values given in this data sheet describe the typical properties and do not constitute specification limits. Density: 1.15 g/ml (25℃) Viscosity: 100-800 cps (25℃) Non-volatile matter (20 min., 150 ℃): 50% Solvents: N-Methylpyrrolidone

STOREGE AND TRANSPORTATION Temperature sensitive. Store in dry condition. Slight turbidity of the material that occurs during the storage has no influence on the rheological effectiveness.

APPLICATION After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow characteristic is highly suited for preventing the sedimentation of particals and increasing the anti-sagging properties without impairing leveling.

RECOMMENDED ADDITION LEVEL 0.2-1% additive (as supplied) based upon the total formulation to prevent settling; 0.5-2% to prevent sagging, depending on the polarity and solids in the formulation.

PROCESSING INSTRUCTIONS The additive should be added whilst stirring and distributed homogeneously. It is not necessary to control the temperature. The additive is also suitable for adjusting the viscosity afterwards by incorporating it as a post-additive.

PACKING

25KG iron drum 180KG plastic drum