2-Ethylhexyl methacrylate
1 Inquiries
688-84-6
pharmaceutical grade
99%
ailike
25kg/Bag
2026-06-30
API,Antibiotics,Anti cancer category
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionBasic Info
-
Product Name:
Ethylhexyl methacrylate
Other Name:2-Propenoic acid,2-methyl-,2-ethylhexyl ester;Methacrylic acid,2-ethylhexyl ester;1-Hexanol,2-ethyl-,methacrylate;2-Ethylhexyl methacrylate;NSC 24173;NSC 32647;H 22 (methacrylate);H 22;Acryester EH;Blemmer EHMA 25;Light Ester EH;Ethylhexyl methacrylate;Visiomer EHMA;100242-87-3;118955-12-7;64125-64-0;75577-75-2;94290-92-3;153286-32-9
CAS No.:688-84-6
Molecular Formula:C12H22O2
InChIKeys:InChIKey=WDQMWEYDKDCEHT-UHFFFAOYSA-N
Molecular Weight:198.306
Exact Mass:198.30
EC Number:211-708-6
ICSC Number:1289
NSC Number:32647|24173
DSSTox ID:DTXSID3027293|DTXSID6040797
HScode:2916140000
Categories:
Characteristics-
PSA:
26.3
XLogP3:4.5
Appearance:Liquid
Density:0.880 g/cm3 @ Temp: 25 °C
Melting Point:-50 °C
Boiling Point:110 °C @ Press: 14 Torr
Flash Point:92°C
Refractive Index:1.436
Water Solubility:H2O: <0.1 g/L
Storage Conditions:The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. Moisture may cause rust-initiated polymerization. /Acrylic acid & derivatives/
Vapor Pressure:Vapour pressure, Pa at 20°C: 133
Vapor Density:Relative vapour density (air = 1): 6.8
Toxicity:LD50 orally in Rabbit: > 2000 mg/kg
Explosive limit:This material polymerizes exothermically in the presence of heat, contamination, oxygen free atmosphere, free radicals, peroxides, and inhibitor depletion liberating heat. /Formulation >99% 2-ethylhexyl methacrylate/
Henrys Law Constant:Henry's Law constant: 1.1X10-3 atm-cu m/mol @ 25 °C /Estimated/
Experimental Properties:Hydroxyl radical reaction rate constant: 2.9X10-11 cu cm/molecule-sec @ 25 °C /Estimated/
Physical Dangers:Vapours are uninhibited and may polymerize in vents or flame arresters, causing blockage.
Hazard IdentificationClassification of the substance or mixture
Skin irritation, Category 2
Skin sensitization, Sub-category 1B
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P333+P317 If skin irritation or rash occurs: Get medical help.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Cool. Store only if stabilized.To avoid photoinitiation of polymerization, all methacrylates should be stored with minimal exposure to light.
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
API,Antibiotics,Anti cancer category
-
Location:
12A02-9, Union Building, Building 1, No. 216 Tongchuan Road, Licang District, Qingdao City, Shandong Province
-
Payment Terms:
TT against copy of documents,D/P,L/C,D/A,O/A,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
15
-
Total Annual Revenue:
$25 million-$50 million
-
Total Employees:
201-300
-
Year of Establishment:
2024
-
Certifications:
Hazardous Chemicals Business License,Supplier Agreement
-
-
Inquiry History1 Inquiries
Country Product Purchase Quantity Date Posted 
United States
2-ethylhexyl methacrylate
87595 KG Jul 4, 2024 Post an enquiry for this product
