Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Kieselguhr, soda ash flux-calcined

Kieselguhr, soda ash flux-calcined

pharmaceutical raw materials
Kieselguhr, soda ash flux-calcined structure

Kieselguhr, soda ash flux-calcined 

structure
  • CAS No:

    68855-54-9

  • Chemical Name:

    Kieselguhr, soda ash flux-calcined

  • Synonyms:

    Kieselguhr,soda ash flux-calcined;Diatomaceous earth,flux-calcined

  • Categories:

    Chemical Reagents  >  Silane Reagent

Description

white to off-white powder Amorphous silica, the noncrystalline form of SiO2, is a transparent to gray, odorless, amorphous powder

Kieselguhr, soda ash flux-calcined Basic Attributes

60.084

105.964

293-303-4

38029000

Characteristics

63.2

0.00000

965 rod (1/8")

0.47 g/cm3 (loose weight)(lit.)

>450℃

Decomposes

Insoluble in water.

Store at RT.

Safety Information

NONH for all modes of transport

2

48/20-49-36/37-36/38-45-36/37/38

22-36-26-53-45-36/37/39-39

VV7311000

T,Xn

Dry. Well closed. Separated from incompatible materials. See Chemical Dangers.

Stable at ordinary temperature and atmospheric conditions; dries out somewhat in warm, dry air or above 50 deg C /Sodium carbonate monohydrate/

P261-P305 + P351 + P338

H373

Kieselguhr, soda ash flux-calcined Use and Manufacturing

Methods of Manufacturing

Natural powder is obtained by classification and screening of diatom debris after air drying (<800℃). Gray to beige. The calcinable powder is made by air drying, sieving and calcining at high temperature (815 ~ 982 ℃), and then classification. It is pink to off-white. The molten and calcined powder (white) is air-dried and sieved, and it is obtained by proper melting and calcination (800-1200°C) in the presence of flux (soda ash or other alkali salts) and classification. The acid powder is made by one of the above three kinds of powders after further pickling and water showering and drying.

Uses

Celite (R) 545 AW was used as stationary phase in purification of fagopyritols using preparative chromatography.Celite (R) 545 AW was used as packing material for fractionating procedure and the fractions were analysed using GC-ECD, GC/ECNI-MS 2 and IC-MS/MS.

Recommended Suppliers of Kieselguhr, soda ash flux-calcined

Latest News on Kieselguhr, soda ash flux-calcined

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.