Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide structure

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide 

structure
  • CAS No:

    11106-54-0

  • Formula:

    C17H20N2O2

  • Chemical Name:

    Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide

  • Synonyms:

    Diazene,1-(4-butylphenyl)-2-(4-methoxyphenyl)-,monooxide;Diazene,(4-butylphenyl)(4-methoxyphenyl)-,monooxide;(p-Methoxyphenyl)-p-butylphenyldiazene N-oxide;4-Methoxy-4′-butylazoxybenzene;4-Butyl-4′-methoxyazoxybenzene;p-Methoxy-p′-butylazobenzene N-oxide;p-Methoxy-p′-butylazoxybenzene;p-Butyl-p′-methoxyaxoxybenzene;Methoxybutylazoxybenzene;4-n-Butyl-4′-methoxyazoxybenzene;8074-70-2;53469-17-3;56214-96-1;56728-18-8;68992-88-1

Description

No information available.

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide Basic Attributes

284.3529

284.152

234-339-2

DTXSID6065139

Characteristics

50.3

5

16 °C

Dust can be explosive when suspended in air at specific concentrations.

Dust can be explosive when suspended in air at specific concentrations.

Amines, Phosphines, and Pyridines

4-METHOXYBENZYLIDINE-4'-N-BUTYLAZOXYBENZENE is an azo compound. Azo, diazo, azido compounds can detonate. This applies in particular to organic azides that have been sensitized by the addition of metal salts or strong acids. Toxic gases are formed by mixing materials of this class with acids, aldehydes, amides, carbamates, cyanides, inorganic fluorides, halogenated organics, isocyanates, ketones, metals, nitrides, peroxides, phenols, epoxides, acyl halides, and strong oxidizing or reducing agents. Flammable gases are formed by mixing materials in this group with alkali metals. Explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides.

Safety Information

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide Use and Manufacturing

Diazene, 1-(4-butylphenyl)-2-(4-methoxyphenyl)-, monooxide: INACTIVE

Computed Properties

Molecular Weight:284.35
XLogP3:5
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:6
Exact Mass:284.152477885
Monoisotopic Mass:284.152477885
Topological Polar Surface Area:50.3
Heavy Atom Count:21
Complexity:317
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.