Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone

1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone

1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone structure

1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone 

structure
  • CAS No:

    1125828-30-9

  • Formula:

    C12H8ClF3N2O

  • Chemical Name:

    1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone

  • Synonyms:

    1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone;1-(4-chloro-2-(3-methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethan-1-one;EOS-61312;Ethanone, 1-[4-chloro-2-(3-methyl-1H-pyrazol-1-yl)phenyl]-2,2,2-trifluoro-;1-[4-chloro-2-(3-methylpyrazol-1-yl)phenyl]-2,2,2-trifluoroethanone

  • Categories:

    Pharmaceutical Intermediates  >  Antineoplastics

1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone Basic Attributes

288.6529296

288.02800

DTXSID60649116

2933199090

Characteristics

34.9

3.7

1.41±0.1 g/cm3(Predicted)

365.4±42.0 °C(Predicted)

1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone Use and Manufacturing

The above THF solution was transferred to a jacketed 3L 3-neck round bottom flask equipped with a mechanical stirrer, a temperature controller, and a nitrogen inlet. After diluting with THF (800 mL), the water content in the solution was checked by KF (0.053percent). To the above solution was added a solution of i-PrMgCl in THF (Aldrich 2 M, 286 mL, 0.572 mol) at 0-10° C. over 1 hours. The resulting solution was stirred for 30 minutes at 10° C. (GC showed the completion of magnesium-bromine exchange reaction). Ethyl trifluoroacetate (74 mL, 0.620 mol) was then added to the Grignard solution between -20 and -10° C. over 45 minutes, slowly warmed to 0° C., and stirred for 30 minutes at the same temperature. The reaction mixture was poured into 2 N HCl (300 mL) at 0° C., and stirred for 30 minutes at room temperature. The organic layer was diluted with MTBE (500 mL), and washed with brine (250 mL) followed by water (250 mL). Solution assay of organic layer was carried out using GC (Compound 5: 67percent solution yield, the corresponding regioisomer 6 was present at about 20percent relative to 5). The solution was then concentrated under vacuum to 2.x. solution. To remove water, THF (500 mL) was added, and evaporated to 2.x. solution. THF addition-concentration was repeated to give a 2.x. solution. Heptane (500 mL) was added, concentrated to 2.x. solution to exchange the solvent for recrystallization. Heptane (500 mL) was again added, concentrated to 3.5.x. solution.The 3.5.x. heptane solution was then transferred to a 1L 3-neck jacketed round bottom flask equipped with a mechanical stirrer, a temperature controller, and a nitrogen inlet. The solution was heated at 60° C., and the resulting homogeneous solution was slowly (1-2 h) cooled to room temperature with stirring, further cooled to 0° C. and stirred for 30 minutes at the same temperature. The crystals were collected and washed with ice-cold heptane (200 mL), dried under vacuum at 50° C. to afford a pale yellow solid (Compound 5, 85.7 g, 99percent pure by GC, 62percent yield from fluoride 1). M.p.: 83° C. (DSC onset temperature)

Computed Properties

Molecular Weight:288.65
XLogP3:3.7
Hydrogen Bond Acceptor Count:5
Rotatable Bond Count:2
Exact Mass:288.0277251
Monoisotopic Mass:288.0277251
Topological Polar Surface Area:34.9
Heavy Atom Count:19
Complexity:350
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 1-(4-Chloro-2-(3-Methyl-1H-pyrazol-1-yl)phenyl)-2,2,2-trifluoroethanone

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.