Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 6-Chloronicotinic acid tert-butyl ester

6-Chloronicotinic acid tert-butyl ester

6-Chloronicotinic acid tert-butyl ester structure

6-Chloronicotinic acid tert-butyl ester 

structure
  • CAS No:

    115309-57-4

  • Formula:

    C10H12ClNO2

  • Chemical Name:

    6-Chloronicotinic acid tert-butyl ester

  • Synonyms:

    6-Chloronicotinic acid tert-butyl ester;tert-butyl 2-chloro-5-pyridinecarboxylate;tert-Butyl 6-chloronicotinate;tert-butyl 6-chloropyridine-3-carboxylate

6-Chloronicotinic acid tert-butyl ester Basic Attributes

213.66

213.05600

DTXSID60467973

2933399090

Characteristics

39.2

2.7

1.173±0.06 g/cm3(Predicted)

53-54 °C

270.7±20.0 °C(Predicted)

6-Chloronicotinic acid tert-butyl ester Use and Manufacturing

A solution of 6-chloronicotinic acid (31.6 g, 200 mmol) and 4-dimethylaminopyridine (2.4 g, 20 mmol) in THF (250 mE) was refluxed for 3 hours. Then di-tert-butyl dicarbonate (65.0 g, 300 mmol) was added dropwise. After addition, the reaction mixture was refluxed for 3 hours. Upon reaction completion, the reaction mixture was cooled to room temperature. The solvent was removed and the residue was purified by column chromatography on silica gel (ethyl acetate/petroleum ether=0.-1/10) to give tert-butyl 6-chloronicotinate (40 g, 94percent yield) as a white solid. EC-MS (Agilent ECMS 1200-6120, Column:Waters X-l3ridge C18 (50 mmx4.6 mmx3.5 pm); Column Temperature: 40° C.; Flow Rate: 2.0 mE/mm; Mobile Phase:from 95percent [water+10 mM NH4HCO3] and 5percent [CH3CN] to 0percent [water+10 mM NH4HCO3] and 100percent [CH3CN] in 1.6 mm, then under this condition for 1.4 mm, finally changed to 95percent [water+10 mM NH4HCO3] and 5percent [CH3CN] in 0.1mm and under this condition for 0.7 mm). Purity is 100percent, Rt=1.984 mm; MS Calcd.: 213.06; MS Found: 214.2[M+H]. ‘H NMR (400 MHz, DMSO-d5) ö 1.56 (9H, s), 7.67 (1H, d, J=8.4 Hz), 8.26 (1H, dd, J=8.0, 2.4 Hz), 8.86(1H, d, J=2.4 Hz). Chemical Formula: C, QH, 2C1N02, MolecularWeight: 213.66. Total H count from HNMR data: 12.A mixture of 6-chloronicotinic acid (12.0 g, 76 mmol) and thionyl chloride (65 mL) was heated at reflux for 3.0 h. The excess thionyl chloride was removed under reduced pressure, and the residual liquid was diluted with dichloromethane (20 mL) and then added to a solution of tert-butyl alcohol (71 mL, 760 mmol) in dichloromethane (40 mL). To the mixture was added triethylamine (31.7 mL, 760 EPO General procedure: To 6-chloronicotinic acid 19a (10 g) in methylene chloride(100 ml) solution, N, N’-diisopropyl-O-tert-butylisourea (50 g) wasadded and the mixture was stirred under heating and reflux for16 h. The insoluble compound was filtered out, and the filtratewas concentrated. The residue was purified by silica gel column chromatography (chloroform/ethyl acetate = 6/1) to obtain the compound 20a (11.66 g). To the compound 20a (6.0 g) in dimethylacetoamide (30 ml) solution, tris(dibenzylideneacetone)dipalladium (0.51 g), zinc cyanide (0.22 g), diphenylphosphinoferrocene (0.62 g), and zinc powder (1.98 g) were added and the mixture was stirred under argon atmosphere at 120 °C for 3 h. The reaction solution was filtered by sellite, which was then washed with ethyl acetate. Then, the filtrate was washed with distilled water and saturated saline, then the organic layer was dried over with anhydrous sodium sulfate and concentrated. The obtained residue was purified by silica gel column chromatography (hexane/ethyl acetate= 5/1) to obtain the compound 21a (3.59 g). To copper(I) iodide(0.93 g) in tetrahydrofuran (50 ml) suspension, ethylmagnesium bromide (0.86 M tetrahydrofuran solution)(12.5 ml) was added dropwise under cooling at 0 °C, the mixture was stirred at 0 °C for 30 min, then the compound 21a (1.0 g) obtained above in tetrahydrofuran (10 ml) solution was added atthe 20 °C. After stirring for 30 min at that temperature, 28percent ammonia solution in water and ethyl acetate were added to the mixture and the solution separated. The aqueous layer was extracted with ethyl acetate, while the combined organic layer was washed with saturated saline, then was dried over with anhydrous sodium sulfate and concentrated. The obtained residue was purifiedby silica gel column chromatography (hexane/ethyl acetate= 8/1) to obtained the compound 22a (0.47 g). To the compound 22a (200 mg) in tetrahydrofuran (1 ml) solution, (-)-B-chlorodiisopinocampheylborane (65percent hexane solution) (0.92 ml) was added dropwise under cooling at 20 °C, then the mixture was stirred at that temperature for 18 h. Then, ether and distilled water were added to the reaction mixture, and the solution was separated. The organic layer was extracted with distilled water and 1 M hydrogen chloride. Then, the combined aqueous layer was neutralized by sodium hydrogen carbonate, and extracted with ethyl acetate. Organic layer was washed with saturated saline, then was dried over with anhydrous sodium sulfate and concentrated to obtained the title compound (150 mg, 84percent ee). The optical purity was determined using CHIRALCEL AD-H(Daicel Chemical Industries) (movement phase: hexane/ethanol= 98/2, 1.0 ml/min).

Computed Properties

Molecular Weight:213.66
XLogP3:2.7
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:3
Exact Mass:213.0556563
Monoisotopic Mass:213.0556563
Topological Polar Surface Area:39.2
Heavy Atom Count:14
Complexity:213
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 6-Chloronicotinic acid tert-butyl ester

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.