Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 2,2′-Diamino-4,4′-bithiazole

2,2′-Diamino-4,4′-bithiazole

2,2′-Diamino-4,4′-bithiazole structure

2,2′-Diamino-4,4′-bithiazole 

structure
  • CAS No:

    58139-59-6

  • Formula:

    C6H6N4S2

  • Chemical Name:

    2,2′-Diamino-4,4′-bithiazole

  • Synonyms:

    [4,4′-Bithiazole]-2,2′-diamine;4,4′-Bithiazole,2,2′-diamino-;2,2′-Diamino-4,4′-bithiazole;2,2′-Diamino-4,4′-bi-1,3-thiazole;2,2′-Diamino-4,4′-bis(1,3-thiazole);368423-60-3;190516-19-9

  • Categories:

    Chemical Reagents  >  Organic Reagents

Description

No information available.

2,2′-Diamino-4,4′-bithiazole Basic Attributes

198.27

198.27

DTXSID2074879

Characteristics

134

0.30

1.6±0.1 g/cm3

237-240 °C (decomp) @ Solvent: Pyridine

499.8±20.0 °C at 760 mmHg

256.1±21.8 °C

1.779

No rapid reaction with air. No rapid reaction with water.

Amines, Phosphines, and Pyridines

An organosulfide and an amine. Organosulfides are incompatible with acids, diazo and azo compounds, halocarbons, isocyanates, aldehydes, alkali metals, nitrides, hydrides, and other strong reducing agents. Reactions with these materials generate heat and in many cases hydrogen gas. Many of these compounds may liberate hydrogen sulfide upon decomposition or reaction with an acid. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.

Safety Information

EB9000000

P264, P280, P302+P352, P305+P351+P338, P321, P332+P313, P337+P313, P362

H315

Flash point data for this compound are not available. It is probably nonflammable. (NTP, 1992)

|Warning|H302 (50%): Harmful if swallowed [Warning Acute toxicity, oral]|P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P340, P305+P351+P338, P312, P321, P330, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 2 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then dampen the solid spill material with toluene, then transfer the dampened material to a suitable container. Use absorbent paper dampened with toluene to pick up any remaining material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash all contaminated surfaces with toluene followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

2,2'-diamino-4,4'-bithiazole

Computed Properties

Molecular Weight:198.3
XLogP3:1
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:6
Rotatable Bond Count:1
Exact Mass:198.00338856
Monoisotopic Mass:198.00338856
Topological Polar Surface Area:134
Heavy Atom Count:12
Complexity:150
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 2,2′-Diamino-4,4′-bithiazole

Latest News on 2,2′-Diamino-4,4′-bithiazole

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.