Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Diethylaluminum chloride

Diethylaluminum chloride

Diethylaluminum chloride structure

Diethylaluminum chloride 

structure
  • CAS No:

    96-10-6

  • Formula:

    C4H10AlCl

  • Chemical Name:

    Diethylaluminum chloride

  • Synonyms:

    Aluminum,chlorodiethyl-;Diethylaluminum chloride;Aluminum,dichlorotetraethyldi-;Chlorodiethylaluminum;Diethylaluminum monochloride;Diethylchloroaluminum;Diethylaluminium chloride;12080-90-9

  • Categories:

    Organic Chemistry  >  Organometallic Compounds

Description

colorless solution The aluminum alkyl halides are flammable, reactive, and may be spontaneously combustible in air. They are colorless to yellow liquids. Ethylaluminum dichloride:(563-43-9):


Liquid

Diethylaluminum chloride Basic Attributes

120.56

120.02900

202-477-2

9J9260380K

3052

DTXSID5026592

Colorless liquid

2903199000

Characteristics

0

2.63730

Colorless Solution

0.9709 g/cm3 @ Temp: 25 °C

-74 °C

208 °C

−9 °F

Miscible with hexane.

0-6°C

3 mmHg ( 60 °C)

Inhalation-rat LC50: 11000 mg/m3

Spontaneous combustion in air; decomposition of flammable and toxic hydrocarbons, chloride gases in case of water, acids, oxidants, alkalis and amines

...Violently explosive when they come into contact with water. /Aluminum alkyls/

Freezing point: -50 °C|Strongly associated forming dimers; held together by bridging halogen bonds; halogen aluminum bonds cleaved by water and alcohol /Aluminum alkyls/|Alkylaluminum chlorides, bromides, and iodides are usually dimeric, with bridging halides.

Safety Information

I

4.3

UN 3394 4.2/PG 1

2

14-17-34-67-65-62-51/53-48/20-14/15-11-63-50/53

36/37/39-45-62-61-43-26-16

BD0558000

F,C,N

Treasury is ventilated at low temperature and dry; stored separately from highly reactive substances such as acids and oxidants

Less sensitive than trialkylaminums to oxidation upon exposure to air. /Alkylaluminum halides/

P210-P222-P223-P231 + P232-P370 + P378-P422

H225-H250-H260-H304-H314-H336-H361f-H373-H411

Aluminum compounds are treated under anhydrous conditions to prevent violent reactions, recover solvent, and form Al compounds suitable for landfill by reaction with anhydrous hydrolysis agent, eg calcium hydroxide. /Aluminum compounds/|SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Reacts violently with air and water. Reacts with oxidizing materials, water, acids, and alcohols.|Reaction with chlorine azide may form and explosive product.|Extremely reactive with air, moisture, and compounds containing active hydrogen... /Alkyl aluminum compounds/|Reacts violently with a broad range of materials including air & water. /Aluminum alkyls/

Anon; Information profiles on Potential Occupaional Hazards: Aluminum & Compounds, 2nd Draft (Revised); GRA & I Issue 21 NTIS/PB89-216238 (1989)> TD3: Information profiles are working papers used by the National Institute for Occupational Safety and Health to assist the Institute in establishing priorities. The proile summarizes data on organic and inorganic substances containing aluminum as the only metal. Each summary presents data on known and suspected health effects, the extent of worker exposure, physical and chemical properties and the industrial importance of the following aluminum compounds: aluminum metal, aluminum ammonium sulfate, aluminum chlorhydrate, aluminum chloride anhydrous, aluminum chloride hydrous, aluminum distearate, aluminum ethoxide, aluminum fluoride, aluminum hydride, aluminum hydroxide, aluminum nitrate, aluminum oxide, aluminum ortho-phosphate, aluminum potassium sulfate, aluminum silicate, aluminum sodium sulfate, aluminum sulfate, calcium aluminum silicate, diethylaluminum chloride, sodium aluminate, tri-n-butylaluminum, triethylaluminum, tri-n-hexylaluminum, triisobutylaluminum, tri-n-octylaluminum. Detailed literature searches are conducted to identify information to be used in the profile sumaries. Sponsored by National Inst. for Occupational Safety and Health, Rockville, MD.

Flammable - 4th degree, Reactive - 3rd degree

|Danger|H225 (30.71%): Highly Flammable liquid and vapor [Danger Flammable liquids]|P210, P222, P223, P231+P232, P233, P240, P241, P242, P243, P260, P264, P280, P301+P330+P331, P302+P334, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P335+P334, P363, P370+P378, P402+P404, P403+P235, P405, P422, and P501|Aggregated GHS information provided by 241 companies from 11 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Wear special protective clothing & positive pressure self-contained breathing apparatus.|Wear appropriate personal protective clothing to prevent skin contact. /Aluminum (soluble salts and alkyls, as Al/|Wear appropriate eye protection to prevent eye contact. /Aluminum (soluble salts and alkyls, as Al)/|Protective clothing and a high standard of training in the necessary precautionary measures are essential for the handling of the materials. /Aluminum alkyls/

Ignites spontaneously in air.|Pyrophoric. Flammable liquid.|Certain polymerization catalysts, such as aluminum alkyls, react & burn violently on contact with water. /Aluminum alkyls/|Aluminum alkyls are organic aluminum compounds that are highly reactive and dangerous because of spontaneous burning in air. /Aluminum alkyls/|Prophoric material in flammable solvent. Vapors are heavier than air & may travel to a source of ignition & flash back. /Aluminum alkyls/

...Violently explosive when they come into contact with water. /Aluminum alkyls/

Fight fire from protected location or maximum possible distance. DO NOT use water. Violent reaction may result. Use graphite powder, soda ash, or powdered sodium chloride to extinguish fire. On solvent based materials use dry chemical, foam, or carbon dioxide. Use water spray cautiously to keep fire-exposed containers cool.|Stop flow of liquid before extinguishing fire. Use dry chemical or carbon dioxide. DO NOT use water as straight stream directly on spilled material. Water fog can be used to control fire. DO NOT use halogenated extinguishing agents on spilled material. Violent reaction may result. Use water spray to keep fire-exposed containers cool. Fight fire from protected location or maximum possible distance. /Aluminum Alkyls/

Approach release from upwind. Keep water away from release. Do no use foam to blanket release or suppress vapors. Stop or control the leak, if this can be done without undue risk. control runoff and isolate discharged material for proper disposal.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.|Work clothing that becomes wet or significantly contaminated should be removed and replaced. /Aluminum (soluble salts and alkyls, as Al)/|Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premises. /Aluminum (soluble salts and alkyls, as Al)/|The worker should immediately wash the skin when it becomes contaminated. /Aluminum (soluble salts and alkyls, as Al)/|SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

If ... THERE IS NO FIRE, go directly to the Table of Initial Isolation and Protective Action Distances /(see table below)/ ... to obtain initial isolation and protective action distances. IF THERE IS A FIRE, or IF A FIRE IS INVOLVED, go directly to the appropriate guide /(see guide(s) below)/ and use the evacuation information shown under PUBLIC SAFETY. /Aluminum alkyl halides; Aluminum alkyl halides, liquid; Aluminum alkyl halides, solid/|Table of Water-Reactive Materials Which Produce Toxic Gases|/GUIDE 135: SUBSTANCES - SPONTANEOUSLY COMBUSTIBLE/ Fire or Explosion: Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated. /Aluminum alkyl halides; Aluminum alkyl halides, liquid; Aluminum alkyl halides, solid/|/GUIDE 135: SUBSTANCES - SPONTANEOUSLY COMBUSTIBLE/ Health: Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution. /Aluminum alkyl halides; Aluminum alkyl halides, liquid; Aluminum alkyl halides, solid/|For more DOT Emergency Guidelines (Complete) data for CHLORODIETHYLALUMINUM (10 total), please visit the HSDB record page.

No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./|The International Air Transport Association (IATA) Dangerous Goods Regulations are published by the IATA Dangerous Goods Board pursuant to IATA Resolutions 618 and 619 and constitute a manual of industry carrier regulations to be followed by all IATA Member airlines when transporting hazardous materials.|The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article.

Irritating to skin, eyes, and respiratory system.|Irritation of the eyes has been noted in patients who have been exposed /to aluminum alkyls/. /Aluminum alkyls/|May cause minor irritation to lungs or eyes. /Aluminum (dust or powder)/

Vacated 1989 OSHA PEL TWA 2 mg/cu m is still enforced in some states. /Aluminum, soluble salts & alkyls, as Al/

Recommended Exposure Limit: 10-Hr Time-Weighted Avg: 10 mg/cu m (total). /Aluminum/|Recommended Exposure Limit: 10 Hr Time-Weighted Avg: 5 mg/cu m (resp). /Aluminum/|Recommended Exposure Limit: 10 Hr Time-Weighted Avg: 2 mg/cu m. /Aluminum (soluble salts and alkyls, as Al)/|Recommended Exposure Limit: 10 Hr Time-Weighted Avg: 5 mg/cu m. /Aluminum (pyro powders and welding fumes, as Al)/

| 3 - Materials that, under emergency conditions, can cause serious or permanent injury.| 4 - Materials that rapidly or completely vaporize at atmospheric pressure and normal ambient temperature or that are readily dispersed in air and burn readily.| 3 - Materials that in themselves are capable of detonation or explosive decomposition or explosive reaction but that require a strong initiating source or must be heated under confinement before initiation.

D003; A waste containing ???CHEMICAL??? may (or may not) be characterized a hazardous waste following testing for the reactivity characteristics as prescribed by the Resource Conservation and Recovery Act (RCRA) regulations.

Toxicity

moderately toxic

Drug Information

/SIGNS AND SYMPTOMS/ Corrosive. Causes severe eye and skin burns. Irritating to skin, eyes, and respiratory system. May be harmful if absorbed through skin or inhaled. "Metal fume fever" may result from inhalation of fumes /from organoaluminum compounds/. /SRP: While possible, metal fume fever is not highly probable./|/OTHER TOXICITY INFORMATION/ Vapors of the pyrophoric alkyls (butyls and below) are nontoxic because they are completely consumed, but inhalation of the metallic oxide smoke (Al2O3) at 15 mg/cu m or greater can result in symptoms such as "metal fume fever." /Aluminum alkyls/

Diethylaluminum chloride Use and Manufacturing

Methods of Manufacturing

1. Aluminum iodide method (sesquimethod) The ethyl chloride dried by aluminum oxide reacts with aluminum powder in the presence of activator iodine and sesquiethyl aluminum chloride to form sesquiethyl aluminum chloride (abbreviated as sesquiethyl aluminum chloride). Semi-substance), and then react with metallic sodium or sodium chloride to obtain diethyl aluminum chloride. 2. Aluminum-magnesium alloy method The refined ethyl chloride reacts with the aluminum-magnesium alloy activated by ball milling and diethyl aluminum chloride, and the finished product is obtained after evaporation. 3. The direct method adds triethyl aluminum and hydrogen to the activated aluminum to react to form diethyl aluminum hydride, and then react with ethylene to form triethyl aluminum. The reaction of triethyl aluminum and aluminum trichloride produces diethyl aluminum chloride. Raw material consumption (kg/t), aluminum iodine method aluminum powder ≥99.5% 400 chloroethane ≥99% 1460 iodine ≥99.5% 8 sodium metal ≥99.5% 134.5

Uses

Co-catalyst for propylene polymerization, low-pressure polyethylene catalyst; reaction catalyst for ethylene-propylene rubber, polyisobutylene, aromatics hydrogenation; rocket, missile fuel and aluminum plating raw materials. Diethylaluminum chloride is very destructive to human tissues. It produces chemical burns when in contact with the skin. It reacts with oxygen in the air to produce toxic and corrosive fumes, which strongly stimulate respiratory organs.

Production

1,000,000 - 10,000,000 lb|(1979) PROBABLY GREATER THAN 4.54X10+6 GRAMS

POLYMERIZATION CATALYST FOR POLYPROPYLENE, 60%; POLYMERIZATION CATALYST FOR CIS-1,4-POLYBUTADIENE, 32%; POLYMERIZATION CATALYST FOR ETHYLENE-PROPYLENE-DIENE ELASTOMERS, 8% (1981)|(1981) 2.86X10+9 G (EST CONSUMPTION)

Aluminum, chlorodiethyl-: ACTIVE

Fire Hazards -> Flammable - 4th degree, Reactive - 3rd degree

Computed Properties

Molecular Weight:120.56
Rotatable Bond Count:2
Exact Mass:120.0286414
Monoisotopic Mass:120.0286414
Heavy Atom Count:6
Complexity:26.7
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Material

Downstream Products

Recommended Suppliers of Diethylaluminum chloride

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.