3-Nitrobenzyl chloride
-
3-Nitrobenzyl chloride
structure -
-
CAS No:
619-23-8
-
Formula:
C7H6ClNO2
-
Chemical Name:
3-Nitrobenzyl chloride
-
Synonyms:
Benzene,1-(chloromethyl)-3-nitro-;Toluene,α-chloro-m-nitro-;1-(Chloromethyl)-3-nitrobenzene;m-Nitrobenzyl chloride;α-Chloro-m-nitrotoluene;3-Nitrobenzyl chloride;m-Nitrobenzyl chloride;NSC 9802
- Categories:
-
CAS No:
Description
yellow to brown crystalline solid
M-nitrobenzyl chloride is a yellow to brown solid. (NTP, 1992)
M-nitrobenzyl chloride is a yellow to brown solid. (NTP, 1992)
3-Nitrobenzyl chloride Basic Attributes
171.58
171.58
742794
210-586-1
OJL133898O
9802
3261
DTXSID4025743
PALE YELLOW NEEDLES FROM PETROLEUM ETHER
2904909090
Characteristics
45.8
2.85680
Light yellow to light brown Crystalline Solid
1503
45-47 °C
175-183 °C @ Press: 30-35 Torr
>230 °F
1.5577 (62ºC)
H2O: <0.1 g/100 mL at 22 ºC;INSOL IN WATER; SOL IN ALCOHOL, ETHER, BENZENE, ACETIC ACID; VERY SOL IN ETHYL ACETATE, ACETONE
Reference value: oral-rat LD50: 1809 mg/kg; inhalation-rat LCL0: 280 mg/m3/4 hours
Combustible in case of fire; burning produces toxic nitrogen oxide fumes
Insoluble in water.
Halogenated Organic Compounds
A halogenated aromatic nitro compound. Aromatic nitro compounds range from slight to strong oxidizing agents. If mixed with reducing agents, including hydrides, sulfides and nitrides, they may begin a vigorous reaction that culminates in a detonation. The aromatic nitro compounds may explode in the presence of a base such as sodium hydroxide or potassium hydroxide even in the presence of water or organic solvents. The explosive tendencies of aromatic nitro compounds are increased by the presence of multiple nitro groups.
Safety Information
II
8
UN 3261 8/PG 2
3
34-36
26-36/37/39-45-27
XS9090000
C
Treasury is ventilated at low temperature and dry; stored separately from oxidants and food additives
Irritant
P280-P305 + P351 + P338-P310
H314
Flash point data concerning this compound are not available, however, it is probably combustible. (NTP, 1992)
|Danger|H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 44 companies from 3 notifications to the ECHA C&L Inventory.
Fires involving this compound can be controlled using dry chemical, carbon dioxide or Halon extinguishers. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: You should dampen the solid spill material with acetone, then transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the adsorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a strong soap and water solution. Do not reenter the contaminate area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly-closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: When working with this chemical, wear a NIOSH-approved full face chemical cartridge respirator equipped with the appropriate organic vapor and high efficiency particulate filter cartridges. If that is not available, a half face respirator similarly equipped plus airtight goggles can be substituted. However, please note that half face respirators provide a substantially lower level of protection than do full face respirators. (NTP, 1992)
/GUIDE 153: SUBSTANCES - TOXIC AND/OR CORROSIVE (COMBUSTIBLE)/ Health: TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. /Chlorotoluidines; Chlorotoluidines, liquid; Chlorotoluidines, solid/|/GUIDE 153: SUBSTANCES - TOXIC AND/OR CORROSIVE (COMBUSTIBLE)/ Fire or Explosion: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Those substances designated with a "P" may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. /Chlorotoluidines; Chlorotoluidines, liquid; Chlorotoluidines, solid/|/GUIDE 153: SUBSTANCES - TOXIC AND/OR CORROSIVE (COMBUSTIBLE)/ Public Safety: CALL Emergency Response Telephone Number ... . As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate enclosed areas. /Chlorotoluidines; Chlorotoluidines, liquid; Chlorotoluidines, solid/|/GUIDE 153: SUBSTANCES - TOXIC AND/OR CORROSIVE (COMBUSTIBLE)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. /Chlorotoluidines; Chlorotoluidines, liquid; Chlorotoluidines, solid/|For more DOT Emergency Guidelines (Complete) data for ALPHA-CHLORO-M-NITROTOLUENE (8 total), please visit the HSDB record page.
Drug Information
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)
Computed Properties
Molecular Weight:171.58
XLogP3:2.5
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:171.0087061
Monoisotopic Mass:171.0087061
Topological Polar Surface Area:45.8
Heavy Atom Count:11
Complexity:146
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 3-Nitrobenzyl chloride
-
CN
3 YRS
Business licensedTrader Supplier of Acrylonitrile,Sodium biselenite methylamine solution,Methylamine [anhydrous],Zinc dust,Hydrogen peroxide solution [content >8%],Triisopropyl borate,Fuming sulfuric acid,Lithium borohydride,Triethyl borate,Ethyl propionate,Propionic anhydride,Propylarsinic acid,Aniline,4-Aminobiphenyl,4-Aminophenol,2-Aminopropane,Propane,0,0-Dimethyl-S-(2,3-dihydro-5-methoxy-2-oxo-1,3,4-thiadiazol-3-ylmethyl) dithiophosphate,Natural resin paint,Epoxy resin paint,Amino resin paint,Rubber paint,Organic silicon resin,Cyclopentene,n-Butylcyclopentane,N-n-Butylaniline,3-Ethoxyaniline,Ethyl acetate,Acetic acid solution [10%< content <80%],Sodium ethoxide ethanol solution,Ethylamine aqueous solution [concentration 50%~70%],Sodium oxide,Ethyl nitrite,Sodium nitrite,Bromocyclopentane,1-Bromopropane,Bromoacetone,2-Bromoaniline,2-Nitrobromobenzene,3-Nitrobenzyl chloride,4-Nitro-2-methylaniline,4-Nitro-1,3-dimethylbenzene,Valeryl chloride,Glutaronitrile,Lead tetraoxide,Silicon tetrachloride,1,1,3,3-Tetrachloroacetone,Tetrapropylene,2-tert-Butylphenol,Tetradecanoyl chloride,Trichloroacetic acid,Trichlorotoluene,Aluminum trichloride [anhydrous],Phosphorus trichloride,Trimethylcyclohexylamine,1,2,3-Trimethylbenzene,Trimethylchlorosilane,Solvent benzene,Sodium hydroxide,Potassium hydroxide solution [content >30%],Hydrobromic acid,Methyl chloroacetate,Butyl chloroacetate,3-Chloronitrobenzene,4-Chlorotoluene,1-Chloropropane,2-Chloropropionic acid,4-Chloroaniline,2-Chloroaniline,2-Chloro-4-nitroaniline,4-Chloro-2-nitrophenol,2,2',4,4',5,5'-Hexabromodiphenyl ether,Hexamethyldisiloxane,Diethyl sulfate,Thioacetic acid,Aluminum phosphide,o-Toluenesulfonyl chloride,Phthalimide,Potassium antimony tartrate,2-Methoxyaniline,Formic acid,1-Methylpentanol,Methyltriethoxysilane,2-Methylaniline,2-Methyl-1-propanol,Toluene diisocyanate,Cyclooctene,Cyclopentane,Cyclohexanone,Cyclohexylamine,Cyclopropane,2-Furanmethanol,N,N-Diethyl-p-toluidine,N,N-Diethyl-1,3-propanediamine,Sodium 2,4-dinitro-5-methylphenolate,3,5-Dinitroaniline,2,6-Dinitroaniline,3,6-Dihydroxyphthalonitrile,3,3'-Dichlorobenzidine,2,4-Dichloroaniline,1,3-Dichlorobenzene,2,2-Dimethylpropionate,3,4-Dimethylaniline,2,5-Dimethylaniline,3,3'-Dimethyl-4,4'-diaminobiphenyl,3,4-Dimethylphenol,1,4-Dimethylbenzene,N,N-Dibutylaniline,Bromoacetic acid,Bromacetyl bromide,Isooctane,Isooctene,Natural gas [rich in methane] (only for chemical raw material use,not for fuel use),Tributyltin acetate,Diphenylphosphine dichloride,Sodium chloroacetate,Dicyclohexylamine,Valeric acid,n-Propyl mercaptan,1,3-Dichloropropane,Dichloromethane,tert-Butyl chloride,Cyclopentyl chloride,Phosphorous acid,Cyclopentanone,Trichloroacetaldehyde [stabilized],Stannous octoate,Calcium resin,Cyclohexane,n-Octane,1,2-Dichloroethane,Thionyl chloride,tert-Butyl hydroperoxide [79%< content <90%,water content >10%],Isopropenyl acetate,Sodium dithionite,Sodium dithionate,Propionyl chloride,Benzene,Hydrobromic acid,Triethylamine,Cyclopentyl chloride,Iodine trichloride,Triethyl borate,Trimethyl borate,Toluene-2,4-diisocyanate,Hydrochloric acid,Chloroform,Benzyl cyanide,Acetone,Sulfuric acid,TolueneInquiryUnit Price: $1 /MT FOBCAS No.: 619-23-8Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
1,3,5-Cycloheptatriene-1-carbonyl chloride (9CI)
103533-75-1
-
3'-De(diMethylaMino)-3'-[[(2-Methoxyethoxy)Methyl]diMethylaMMonio]erythroMycin 9-OxiMe Chloride
151750-47-9
-
decoxymethyl-dimethyl-octyl-azanium chloride
366491-03-4
-
4-[3-(3,5-DICHLORO-PHENYL)-UREIDO]-BENZENESULFONYL CHLORIDE Formula
677326-84-0
-
2,5-DICHLOROBENZYLZINC CHLORIDE Formula
737797-20-5
-
2,5-DIBROMO-3,6-DIFLUOROBENZENESULFONYL CHLORIDE Formula
207853-66-5
-
Dibenzofuran-3-sulfonyl chloride Structure
42138-14-7
-
2,4-Dibromo-5-fluorobenzenesulfonyl chloride Structure
1000578-09-5
-
What is Selenium(I) chloride (99%-Se)
21317-32-8
-
What is 2,6-dibromo-4-methylbenzene-1-sulfonyl chloride
73732-31-7