N,N′-Di-sec-butyl-p-phenylenediamine
-
N,N′-Di-sec-butyl-p-phenylenediamine
structure -
-
CAS No:
101-96-2
-
Formula:
C14H24N2
-
Chemical Name:
N,N′-Di-sec-butyl-p-phenylenediamine
-
Synonyms:
1,4-Benzenediamine,N1,N4-bis(1-methylpropyl)-;p-Phenylenediamine,N,N′-di-sec-butyl-;1,4-Benzenediamine,N,N′-bis(1-methylpropyl)-;N1,N4-Bis(1-methylpropyl)-1,4-benzenediamine;N,N′-Di-sec-butyl-p-phenylenediamine;Du Pont Gasoline Antioxidant No. 22;Topanol M;N,N′-Di-sec-butyl-n-phenylenediamine;Antioxidant 22;N,N′-Di-sec-butyl-p-phenyldiamine;Tenamene 2;UOP 5;Kerobit BPD;Naugalube 403;Unilink 4100;Sumilizer BPAM 1;Santoflex 44;Cerobit BPD;N,N′-Di-sec-butyl-1,4-phenylenediamine;1,4-Bis-(sec-butylamino)benzene;NSC 68417;N,N′-Bis(1-methylpropyl)-1,4-benzenediamine;Sumilizer BPA;Ethanox 4720;N,N′-Di-2-butyl-p-phenylenediamine;Antioxidant 4720;Santoflex 44PD;Antioxidant 44PD;N,N′-Di-2-butyl-1,4-phenylenediamine;1-N,4-N-Di(butan-2-yl)benzene-1,4-diamine;1042164-42-0
- Categories:
-
CAS No:
Description
dark red liquidAmber to red or dark reddish black liquid.
N,n'-di-sec-butyl-p-phenylenediamine appears as amber to red or dark reddish black liquid. (NTP, 1992)|Liquid
N,n'-di-sec-butyl-p-phenylenediamine appears as amber to red or dark reddish black liquid. (NTP, 1992)
N,N′-Di-sec-butyl-p-phenylenediamine Basic Attributes
220.35
220.35
202-992-2
76251WU9I2
68417
1760
DTXSID7024956
Amber to red liquid|Reddish-brown liquid|Pale yellow oil
2921519090
Characteristics
24.1
3.39
N,n'-di-sec-butyl-p-phenylenediamine appears as amber to red or dark reddish black liquid. (NTP, 1992)
94 g/cm3 @ Temp: 20 °C
18 °C
98 °C @ Press: 0.200 Torr
100°C
n 20/D 1.539
H2O: <0.1 g/100 mL at 20 ºC;Insoluble in water; soluble in hydrocarbon solvents
Keep in a well ventilated area. Keep container tightly closed.
85.3 mm Hg at 100° F (NTP, 1992)
LD50 oral in rat: 148mg/kg
This compound may be sensitive to prolonged exposure to air or light. Insoluble in water.
Amines, Aromatic
N,N'-DI-SEC-BUTYL-P-PHENYLENEDIAMINE reacts with oxidizing materials. [NTP,1992]. Neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
625 °F (329 °C)
Safety Information
III
6.1(b)
UN 2922 8/PG 2
3
25-34-43-50/53-41-38
26-36/37/39-45-61-60
SS9040000
C,N,T
Stable. Combustible.
P273-P280-P301 + P310 + P330-P305 + P351 + P338 + P310-P333 + P313
H301-H315-H317-H318-H410
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
This chemical is combustible. (NTP, 1992)
|Danger|H301 (99.46%): Toxic if swallowed [Danger Acute toxicity, oral]|P260, P261, P264, P270, P272, P273, P280, P301+P310, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P314, P321, P322, P330, P333+P313, P361, P363, P391, P405, and P501|Aggregated GHS information provided by 1109 companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly closed container under an inert atmosphere, and store it at refrigerated temperatures. STORE AWAY FROM SOURCES OF IGNITION. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. (NTP, 1992)
| 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.| 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur.| 0 - Materials that in themselves are normally stable, even under fire conditions.
Drug Information
SYMPTOMS: Symptoms of exposure to this compound may include irritation of tissues, skin burns, sweating, flushing of the face, shortness of breath and slow pulse. ACUTE/CHRONIC HAZARDS: This compound is toxic by ingestion, inhalation and skin absorption. It is a strong irritant to tissues and may cause skin burns. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)
N,N′-Di-sec-butyl-p-phenylenediamine Use and Manufacturing
REACTION OF P-PHENYLENEDIAMINE & 2-BUTANONE TO FORM THE DIANIL DERIVATIVE, FOLLOWED BY CATALYTIC HYDROGENATION|s-Butylamine + hydroquinone (reductive amination)|Reductive alkylation of p-phenylenediamine
The amine antioxidant with excellent properties of this product is especially suitable for use as a cracking or thermal cracking gasoline (high olefin content gasoline) additive, which can effectively prevent the oxidation of olefins to produce gels. In addition, this product can also be used as natural rubber, General-purpose antioxidant for synthetic rubber.
Fuels and fuel additives
Fuels and related products
1,000,000 - 10,000,000 lb|(1979) 1.50X10+9 GRAMS|(1981) PROBABLY GREATER THAN 2.27X10+6 GRAMS
"TENAMENE" /IS/ TRADEMARK FOR GROUP OF ADDITIVES FOR GASOLINE & OTHER PETROLEUM PRODUCTS. /TENAMENE/
Petrochemical manufacturing|1,4-Benzenediamine, N1,N4-bis(1-methylpropyl)-: ACTIVE
Computed Properties
Molecular Weight:220.35
XLogP3:4.5
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:6
Exact Mass:220.193948774
Monoisotopic Mass:220.193948774
Topological Polar Surface Area:24.1
Heavy Atom Count:16
Complexity:154
Undefined Atom Stereocenter Count:2
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of N,N′-Di-sec-butyl-p-phenylenediamine
-
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst,Chemical Materials,Chem&Pharm Intermediates,Organic Intermediates,Feed AdditiveInquiryCAS No.: 101-96-2Grade: Industrial GradeContent: 99% -
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
ZA
2 YRS
Business licensedDistributor Supplier of Chemicals bulk -
CN
4 YRS
Business licensedTrader Supplier of intermediates ,fine chemical,food additives -
CN
4 YRS
Business licensedTrader Supplier of Semaglutide,Tirzepatide,API,EnzymeInquiryCAS No.: 101-96-2Grade: Pharmaceutical GradeContent: 99.5%
Learn More Other Chemicals
-
4,4′-(1,2-Diazenediyl)bis[N,N,N-trimethylbenzenaminium]
21704-61-0
-
N-(4-Chloro-2-methylphenyl)formamide
21787-81-5
-
Basic Blue 8
2185-87-7
-
3-tert-butyl-5-chloro-2-hydroxy-N-(2-nitrosophenyl)benzamide Formula
21889-00-9
-
1-Phenylcyclohexylamine Formula
2201-24-3
-
6-Hydroxymelatonin Formula
2208-41-5
-
Pyrrocaine Structure
2210-77-7
-
2-amino-N-(4-ethoxyphenyl)ethanesulfonamide Structure
22103-30-6
-
What is Bufeniode
22103-14-6
-
What is 4-(2-Quinolinyl)benzenamine
22191-97-5
N,N′-Di-sec-butyl-p-phenylenediamine
SDSRequest for Quotation