1,4-Naphthalenediamine
-
1,4-Naphthalenediamine
structure -
-
CAS No:
2243-61-0
-
Formula:
C10H10N2
-
Chemical Name:
1,4-Naphthalenediamine
-
Synonyms:
1,4-Naphthalenediamine;1,4-Diaminonaphthalene;1,4-Naphthylenediamine
- Categories:
-
CAS No:
Description
PHYSICAL DESCRIPTION: Dark green to black crystalline solid. (NTP, 1992)
1,4-naphthalenediamine is a dark green to black crystalline solid. (NTP, 1992)
1,4-naphthalenediamine is a dark green to black crystalline solid. (NTP, 1992)
Characteristics
52
0.55
1,4-naphthalenediamine is a dark green to black crystalline solid. (NTP, 1992)
1.2±0.1 g/cm3
120 °C
369.6±22.0 °C at 760 mmHg
211.5±21.8 °C
1.757
less than 1 mg/mL at 66° F (NTP, 1992)
1.17E-05mmHg at 25°C
This chemical may be sensitive to prolonged exposure to air. Insoluble in water.
Amines, Aromatic
1,4-NAPHTHALENEDIAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Safety Information
NONH for all modes of transport
3
22
QJ3380000
Xn
P305 + P351 + P338
H302-H319
Flash point data for this chemical are not available; however, it is probably combustible. (NTP, 1992)
|Warning|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P280, P301+P312, P305+P351+P338, P330, P337+P313, and P501|Aggregated GHS information provided by 38 companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this material can be controlled using a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
Drug Information
SYMPTOMS: Exposure to a related compound causes irritation. ACUTE/CHRONIC HAZARDS: Exposure to a related compound causes irritation. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Generally, the induction of vomiting is NOT recommended outside of a physician's care due to the risk of aspirating the chemical into the victim's lungs. However, if the victim is conscious and not convulsing and if medical help is not readily available, consider the risk of inducing vomiting because of the high toxicity of the chemical ingested. Ipecac syrup or salt water may be used in such an emergency. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
1,4-naphthylenediamine
Computed Properties
Molecular Weight:158.20
XLogP3:2
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Exact Mass:158.084398327
Monoisotopic Mass:158.084398327
Topological Polar Surface Area:52
Heavy Atom Count:12
Complexity:140
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Learn More Other Chemicals
-
2-Bromophenacyl bromide, 90%
49851-55-0
-
1H-Indazol-7-ol
81382-46-9
-
6-Chloro-4-forMyl-nicotinic acid
1031433-06-3
-
3-Hydroxy-2,4,5-trifluorobenzoic acid Formula
116751-24-7
-
2-Methyl-1-heptene Formula
15870-10-7
-
1-(3,5-Dinitrophenyl)ethanone Formula
14401-75-3
-
α-Amino-3-bromobenzeneacetic acid Structure
79422-73-4
-
6-(BROMOMETHYL)-1,3-BENZOTHIAZOLE,97% Structure
499770-85-3
-
What is Allyl methacrylate
96-05-9
-
What is ethyl 5-hydroxy-2-Methylnicotinate
60390-47-8